# Service bulletin TSB 24\-2142

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 11001575
- Published by NHTSA: 2024\-06\-12
- Manufacturer's number: TSB 24\-2142
- Manufacturer's date: 2024\-06\-06
- NHTSA component: POWER TRAIN

## NHTSA's summary

This article supersedes TSB 23\-2376 to update the Part List and the Service Procedure. Some 2022\-2024 F\-550 and F\-600 F\-Super Duty vehicles equipped with a 10R140 automatic transmission and 6.7L diesel engine may exhibit an illuminated powertrain malfunction \(wrench\) indicator with diagnostic trouble codes \(DTCs\) P2704 and P0771 stored in the transmission control module \(TCM\) with poor shift quality and over 5,000 miles \(8,000 km\) in service. This may be due to wear between the input shaft and the E clutch hub causing the input shaft O\-rings to become damaged resulting in an open E clutch circuit. To correct this condition, follow the Service Procedure to replace the E clutch hub and input shaft O\-rings.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2024/MC-11001575-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2024/MC-11001575-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Transmission and driveline

## Trouble codes named

P0771, P2704

## Vehicles listed

- 2022 to 2024 FORD F\-250 SD
- 2022 to 2024 FORD F\-350 SD
- 2022 to 2024 FORD F\-450 SD
- 2022 to 2024 FORD F\-550 SD
- 2022 to 2024 FORD F\-600 SD
- 2024 FORD F\-650 INCOMPLETE CHASSIS
- 2022 to 2023 FORD F\-650 SD
- 2022 to 2024 FORD F\-750 SD

## Recalls for the same vehicles and component

- [23V758000](/recalls/nhtsa/23V758000.md), 2023-11-09: WHEELS:LUGS/NUTS/BOLTS/STUDS; POWER TRAIN:AXLE HUBS
- [2023508](/recalls/tc/2023508.md), 2023-09-12: Powertrain
- [23V625000](/recalls/nhtsa/23V625000.md), 2023-09-08: POWER TRAIN:AUTOMATIC TRANSMISSION:INTERNAL:PARK PAWL
- [2023478](/recalls/tc/2023478.md), 2023-08-29: Powertrain
- [23V595000](/recalls/nhtsa/23V595000.md), 2023-08-25: POWER TRAIN:AXLE ASSEMBLY:AXLE SHAFT
- [2022074](/recalls/tc/2022074.md), 2022-02-17: Powertrain
- [22V087000](/recalls/nhtsa/22V087000.md), 2022-02-16: STRUCTURE:FRAME AND MEMBERS:UNDERBODY SHIELDS; POWER TRAIN:DRIVELINE:DRIVESHAFT

## Other bulletins for the same vehicles and component

- [TSB 26\-2375 v2](/bulletins/11038441.md), 2026-10-13, Service bulletin: UNKNOWN OR OTHER; ELECTRICAL SYSTEM; POWER TRAIN. NOTE: This bulletin has been updated, refer to the change log at the bottom for details. Issue: Some of the vehicles listed in the Model statement above may exhibit all of the following conditions: • Poor shift quality • Illuminated powertrain malfunction \(wrench\) indicator with DTCs P2704 and P0771 stored in the PCM / TCM . This may be due to a calibration in the TCM and/or wear between the input shaft and the E clutch hub causing theinput shaft O\-rings to become damaged resulting in an open E clutch circuit. Action: For vehicles that meet all of the criteria in the Issue and Model statements, follow the Service Procedure toreprogram the PCM / TCM and/or replace the E clutch hub and input shaft O\-rings
- [SSM 55218](/bulletins/11038166.md), 2026-10-06, Service bulletin: POWER TRAIN; UNKNOWN OR OTHER. For 20202026 vehicles equipped with the 10R140 transmission, a new Transmission Clutch Circuit Leak Test has been introduced in the Ford Diagnosis and Repair System \(FDRS\). This test utilizes the pressure and vacuum transducer \(PVT\) when available. Workshop Manual \(WSM\) updates related to this diagnostic procedure are planned for release in Q4 2026. The new test improves the accuracy of detecting leaks within transmission fluid circuits and replaces the previous air check method. The previous air check procedure has been shown to produce a high rate of false positives, which may lead to unnecessary repairs when no actual leak is present. Accordingly, the air check procedure is not to be used for diagnosing internal transmission hydraulic leaks or as justification for transmission replacement.
- [TSB 26\-2088 v2](/bulletins/11037979.md), 2026-10-05, Service bulletin: UNKNOWN OR OTHER; POWER TRAIN. This bulletin supersedes 24\-2249. Reason for update: update the claim quantity of the torque converter nuts, part number and claim quantity of the front support assembly bolt washers, and part number change of the fluid pan from the Parts List. Reissued 01\-Oct\-2026 \- Added LC3Z\-7G091\-B to the part list
- [TSB 26\-2375](/bulletins/11036283.md), 2026-08-19, Service bulletin: POWER TRAIN; ENGINE; ELECTRICAL SYSTEM. This article supersedes TSB 26\-2050 to increase the labor operation allowance of labor operations A and B. Some of the vehicles listed in the Model statement above may exhibit all of the following conditions: Poor shift quality Illuminated powertrain malfunction \(wrench\) indicator with diagnostic trouble codes \(DTC\) P2704 and P0771 stored in the PCM/TCM. This may be due to a calibration in the TCM and/or wear between the input shaft and the E clutch hub causing the input shaft O\-rings to become damaged resulting in an open E clutch circuit. Additional model information: 6.7L Diesel Engine 2022\-2024 F\-550 or F\-600 F\-Super Duty vehicles built on or before 15\-May\-2024 with over 5,000 miles \(8,000km\)
- [SSM 54976](/bulletins/11034609.md), 2026-07-07, Service bulletin: POWER TRAIN; ELECTRICAL SYSTEM. Some 2023\-2026 F\-53 Motorhome Chassis/F\-59 Commercial Stripped Chassis and 2024\-2026 F\-650/F\-750/E\-Series vehicles equipped with a 6R140 transmission may be limited to 5th gear and reverse gear only. Additionally, the driver will be able to shift back to park. Diagnostic trouble codes \(DTC\) P2701, P2704, P0757, and/or P0733 may be stored in the powertrain control module \(PCM\). This may be due to PCM software being unable to command the transmission solenoid clutch actuators when the battery has a low state of charge \(SOC\) and/or the vehicle has been jump started. To restore proper transmission functionality, charge the battery as stated in the Workshop Manual \(WSM\), Section 414\-01 Charging System \> General Information. Cycle the ignition on then off and leave the vehicle off for 5 minutes to confirm the condition is no longer present. To prevent this issue from reoccurring, refer to the Owner's Manual \> Storing Your Vehicle \> Preparing Your Vehicle for Storage \> 12V Battery. Replacement of transmission components will not resolve this condition. Inform the customer that the condition has no impact on tr
- [SSM 54975](/bulletins/11034605.md), 2026-07-07, Service bulletin: ELECTRICAL SYSTEM; POWER TRAIN. Some 2023\-2026 F\-Super Duty vehicles equipped with a 10R100 or 10R140 transmission may exhibit an intermittent failure to engage forward or reverse gears and/or a loud whining noise. Additionally, the driver will be able to shift back to park. This may be due to PCM software being unable to command the transmission solenoid clutch actuators when the battery has a low state of charge \(SoC\) and/or the vehicle has been jump started. To restore proper transmission functionality, charge the battery as stated in the Workshop Manual \(WSM\), Section 414\-01 Charging System \> General Information. Cycle the ignition on then off and leave the vehicle off for 5 minutes to confirm the condition is no longer present. To prevent this issue from reoccurring, refer to the Owner's Manual \> Storing Your Vehicle \> Preparing Your Vehicle for Storage \> 12V Battery. Replacement of transmission components will not resolve this condition. Inform the customer that the condition has no impact on transmission durability. For claiming, use causal part 12A650 and labor operations 12650D, 12650D45, and 12650D81.
- [SSM 54900](/bulletins/11033774.md), 2026-06-09, Service bulletin: POWER TRAIN. Some 2023\-2026 F\-Super Duty vehicles equipped with a 10R100 or 10R140 transmission may exhibit an intermittent failure to engage forward or reverse gears and/or a loud whining noise. Additionally, the driver will be able to shift back to park. This may be due to PCM software being unable to command the transmission solenoid clutch actuators when the battery has a low state of charge \(SoC\) and/or the vehicle has been jump started. To restore proper transmission functionality, charge the battery as stated in the Workshop Manual \(WSM\), Section 414\-01 Charging System \> General Information. Cycle the ignition on then off and leave the vehicle off for 5 minutes to confirm the condition is no longer present. To prevent this issue from reoccurring, refer to the Owner's Manual \> Storing Your Vehicle \> Preparing Your Vehicle for Storage \> 12V Battery. Replacement of transmission components will not resolve this condition. Inform the customer that the condition has no impact on transmission durability. For claiming, use causal part 12A650 and labor operations 12651D, 12651D45, and 12651D80.
- [SSM 54899](/bulletins/11033763.md), 2026-06-09, Service bulletin: POWER TRAIN. Some 2023\-2026 F\-53 Motorhome Chassis/F\-59 Commercial Stripped Chassis and 2024\-2026 F\-650/F\-750/E\-Series vehicles equipped with a 6R140 transmission may be limited to 5th gear and reverse gear only. Additionally, the driver will be able to shift back to park. Diagnostic trouble codes \(DTC\) P2701, P2704, P0757, and/or P0733 may be stored in the powertrain control module \(PCM\). This may be due to PCM software being unable to command the transmission solenoid clutch actuators when the battery has a low state of charge \(SOC\) and/or the vehicle has been jump started. To restore proper transmission functionality, charge the battery as stated in the Workshop Manual \(WSM\), Section 414\-01 Charging System \> General Information. Cycle the ignition on then off and leave the vehicle off for 5 minutes to confirm the condition is no longer present. To prevent this issue from reoccurring, refer to the Owner's Manual \> Storing Your Vehicle \> Preparing Your Vehicle for Storage \> 12V Battery. Replacement of transmission components will not resolve this condition.
- [TSB 26\-2263](/bulletins/11033575.md), 2026-06-05, Service bulletin: POWER TRAIN. This bulletin supersedes 26\-2112. Reason For Update: add 2026 model year vehicles, update LV fluid XT\-10\-QLVC and CXT\-10\-LV6 description to add "Transfer Case Fluid 4WD Only", and update Step 4 to inspect/replace 7H351 and 7B177 outside of this article. Some of the vehicles listed in the Model statement above may exhibit at least one of the following conditions: \- No upshift past second gear \- Unable to achieve third gear ratio \- Illuminated MIL with DTCs P0757 and P2701 This may be due to a damaged one\-way clutch \(OWC\).
- [TSB 26\-2251](/bulletins/11033574.md), 2026-06-05, Service bulletin: POWER TRAIN. This article supersedes TSB 25\-2545. Reason for update: To correct the current Pinpoint Test description. Some of the vehicles listed in the Model statement above may require the replacement of the ambient air temperature sensor for various concerns. DTCs P0071, P0072, and/or P0073 may be present in the powertrain control module \(PCM\).

JSON: [/v1/bulletins/11001575](/v1/bulletins/11001575)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20TSB%2024-2142&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F11001575&vehicle=Service%20bulletin%20TSB%2024-2142)