# Service bulletin 09\-014\-24

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 11001277
- Published by NHTSA: 2024\-06\-07
- Manufacturer's number: 09\-014\-24
- Manufacturer's date: 2024\-05\-14
- NHTSA component: ENGINE
- Manufacturer's system: Crankcase: Crank Gear Flange

## NHTSA's summary

"Crank Gear Flange Dislocation Customers may experience one or more of the following: ● Vehicle does not start due to crank gear flanged dislocated. ● Abnormal noise from the engine compartment. ● Noise from the timing cover area. This bulletin involves inspecting the timing belt position and possibly replacing the timing belt assembly."

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2024/MC-11001277-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2024/MC-11001277-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Engine

## Vehicles listed

- 2023 to 2024 JEEP COMPASS

## Other bulletins for the same vehicles and component

- [18\-081\-26](/bulletins/11038538.md), 2026-10-16, Service bulletin: ENGINE. Not applicable to vehicles built for US market. Flash: Powertrain Control Module \(PCM\) Updates Customers may experience a Malfunction Indicator Lamp \(MIL\) illumination and the vehicle may SYMPTOM: exhibit/set the following Diagnostic Trouble Code \(DTC\): ● P0607 \- Control Module Performance. Customers may also comment on one or more of the following: ● The vehicle will not start until the ignition is cycled for a second time. ● Engine malfunction \(injection\) warning lamp illuminated in the Instrument Panel Cluster \(IPC\). This bulletin involves reprogramming the PCM with the latest available software.
- [18\-081\-26](/bulletins/11038501.md), 2026-10-16, Service bulletin: ENGINE. Not applicable to vehicles built for US market. Flash: Powertrain Control Module \(PCM\) Updates Customers may experience a Malfunction Indicator Lamp \(MIL\) illumination and the vehicle may SYMPTOM: exhibit/set the following Diagnostic Trouble Code \(DTC\): ● P0607 \- Control Module Performance. Customers may also comment on one or more of the following: ● The vehicle will not start until the ignition is cycled for a second time. ● Engine malfunction \(injection\) warning lamp illuminated in the Instrument Panel Cluster \(IPC\). This bulletin involves reprogramming the PCM with the latest available software.
- [S2609000011](/bulletins/11037354.md), 2026-09-17, Service bulletin: ENGINE. MIL\-On and/or Engine Oil Leak
- [09\-022\-26](/bulletins/11037275.md), 2026-09-10, Service bulletin: ENGINE. Not applicable to vehicles built for US market. Right Engine Insulator Noise \*\*Customers may comment on the following:\*\* SYMPTOM: ● Metallic clicking noises when when moving the vehicle forward and reverse. \*\*This bulletin involves replacing the right engine insulator.\*\*
- [9100363 Rev 3](/bulletins/11036762.md), 2026-09-03, Service bulletin: ENGINE. Turbocharger Kit Please note that many turbo components are serviceable separately and full turbo replacement may not be required. If the turbo is being inspected for: Noise/Rattle: Inspect heat shield fasteners for looseness and check the wastegate actuator/linkage for binding. The actuator kit is serviced separately. Oil Leak: Inspect the turbo oil feed O\-ring area for leaks. O\-ring is serviced separately.
- [09\-018\-26](/bulletins/11036159.md), 2026-08-13, Service bulletin: ENGINE. Not applicable to vehicles built for US market. Cylinder Head Screw Not Specific Customers must experience a Malfunction Indicator Lamp \(MIL\) illumination and the vehicle must SYMPTOM: exhibit/set the following Diagnostic Trouble Code \(DTC\): ● P1212 \- Engine Oil Temperature High \- RPM Limited. Customers may also experience the following: ● Engine overheating. This bulletin involves replacing the cylinder head to block bolts and head gasket.
- [07\-005\-26](/bulletins/11035310.md), 2026-07-29, Service bulletin: STRUCTURE:BODY; ENGINE. Not applicable to vehicles built for US market. M1 H1 Coolant Leak Customers may comment on one or more of the following: SYMPTOM: ● Possible overheat light on instrument cluster. ● Coolant leak from hose that contacts exhaust heat shield. This bulletin involves replacing an engine coolant hose.
- [S2609000010](/bulletins/11034921.md), 2026-07-08, Service bulletin: ENGINE. Mis\-Machined Engine Block
- [9100852](/bulletins/11034918.md), 2026-07-08, Service bulletin: ENGINE. When long block is received, inspection needs to be performed per SOL S2609000010 before the repair begins. If the block machining is not complete according to information in SOL, a new long block will need to be ordered.
- [112639](/bulletins/11034912.md), 2026-07-08, Service bulletin: ENGINE. THROTTLE BODY – NONE

JSON: [/v1/bulletins/11001277](/v1/bulletins/11001277)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%2009-014-24&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F11001277&vehicle=Service%20bulletin%2009-014-24)