# Service bulletin 07\-005\-24

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 11001237
- Published by NHTSA: 2024\-06\-07
- Manufacturer's number: 07\-005\-24
- Manufacturer's date: 2024\-05\-15
- NHTSA component: ENGINE
- Manufacturer's system: Internal Coolant Valve Gear

## NHTSA's summary

"Broken Internal Coolant Valve Gear \*\*Customers must experience a Malfunction Indicator Lamp \(MIL\) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes \(DTCs\):\*\* ● P26A3 \- Engine Coolant Bypass Valve A Range\-Performance. ● P26A6 \- Engine Coolant Bypass Valve Position Sensor Circuit Low. ● P2681 \- Engine Coolant Bypass Valve Control Circuit Open. This bulletin involves replacing the 3\-way coolant valve."

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2024/MC-11001237-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2024/MC-11001237-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Engine

## Trouble codes named

P2681, P26A3, P26A6

## Vehicles listed

- 2022 to 2023 RAM 1500

## Recalls for the same vehicles and component

- [2022584](/recalls/tc/2022584.md), 2022-10-14: Engine
- [22V767000](/recalls/nhtsa/22V767000.md), 2022-10-13: ENGINE; FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP

## Other bulletins for the same vehicles and component

- [9100898](/bulletins/11037347.md), 2026-09-17, Service bulletin: ENGINE. Engine PNs: MY 24\-26 WD/DT \(5.7L\) Code P00B is being misdiagnosed and incorrect parts are being installed causing over repair. Refer to SOL S2609000006 The IAFM Foam Engine Valley Cover \(PN 53013735AB\) does not provide sufficient clearance for proper routing of the MDS solenoid jumper harness \(PN 05148163AE\). As a result, the harness may become compressed by the foam cover. To prevent unnecessary part replacement, the MDS solenoid jumper harness \(PN 05148163AE\) should be inspected for damage or pinch conditions prior to replacing the following part numbers: Engine PNs: 68409343AA 68409357AA 68450915AA OCV PNs: 53022338AB Phaser PNs: 53022298AA 53022298AB
- [S2609000009](/bulletins/11034345.md), 2026-07-02, Service bulletin: ENGINE. Check Engine Light \(CEL\) Illuminated with Diagnostic Trouble Code \(DTC\) P0106 Manifold Absolute Pressure Sensor Performance Setting In The Powertrain Control Module \(PCM\)
- [9100839](/bulletins/11033961.md), 2026-06-18, Service bulletin: ENGINE. 3\-way valves are available in STAR Parts as two distinct components and must be selected correctly based on application. The High Temp 3\-way valve \(68309834AC\) is located between the engine and the bulkhead at the rear of the engine compartment. The Low Temp 3\-way valve \(68448241AA\) is located between the engine and the radiator at the front of the engine. When ordering or servicing, ensure the correct valve is identified and installed in the proper location, as incorrect part selection may lead to improper thermal system operation and repeat repairs.
- [9100702Rev1](/bulletins/11031333.md), 2026-04-15, Service bulletin: ENGINE. Camshaft cap bolts within the cylinder head assembly may cause damage to other components. DO NOT replace entire long block when only left OR right cylinder heads need to be replaced.
- [18\-044\-26](/bulletins/11030229.md), 2026-03-25, Service bulletin: ENGINE. Flash: Powertrain Control Module \(PCM\) Updates Customers must experience a Malfunction Indicator Lamp \(MIL\) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes \(DTCs\): ● \*\*P0111\-00 \- Intake Air Temperature Sensor 1 Circuit Range Performance Bank 1. \(In Active or Stored status\) ● P0071\-00 \- Ambient Air Temperature Sensor Performance. \(In Active or Stored status\) ● P0072\-00 \- Ambient Air Temperature Sensor Circuit "A" Low. \(In Active or Stored status\) ● P0073\-00 \- Ambient Air Temperature Sensor Circuit "A" High. \(In Active or Stored status\) ● P0011\-00 \- Bank 1 Camshaft 1 Position Timing Over Advanced Or. \(In Active or Stored status\) ● P25E4\-00 \- B Camshaft Position \- Unable To Achieve Locked Position Bank 1. \(In Active or Stored status\) ● P05BD\-00 \- Stop\-Start Mode Switch Range/Performance. \(In Active or Stored status\) ● P0116\-00 \- Engine Coolant Temperature Sensor 1 Performance. \(In Active or Stored status\) ● P062B\-00 \- Internal Control Module Fuel Injector Control Performance. \(In Active or Stored status\) ● P0604\-00 \- Internal Control Module Random Access Memory Ram Error. \(In Active or Stored status\) ● P060C\-00 \- Internal Control Module Main Processor Performance. \(In Active or Stored status\)\*\* ● P018B\-00 \- Fuel Pressure Sensor "B" Circuit Range/performance. \*\*\(In Active or Stored status\)\*\* ● P1CEA\-00 \- Boost Side EVAP Purge System Performance. \*\*\(In Active or Stored status\)\*\* ● P06DD\-00 \- Engine Oil Pressure Control Circuit Performance/Stuck Off. \*\*\(In Active or Stored status\)\*\* ● P00C6\-00 \- Fuel Rail Pressure Too Low \- Engine Cranking. \*\*\(In Active or Stored status\)\*\* ● P0300\-00 \- Multiple Cylinder Misfire. \*\*\(In Active or Stored status\)\*\* Customers may also experience one or more of the following: ● \*\*Oil Level High Warning in the Instrument Panel Cluster \(IPC\).\*\* ● Fully Autonomous Parking Assist \(FAPA\) is not deactivated when accelerator pedal is pressed. ● Vehicle is not heating up fast enough at freezi
- [18\-021\-26](/bulletins/11028882.md), 2026-02-19, Service bulletin: ENGINE; ELECTRICAL SYSTEM. Flash: Powertrain Control Module \(PCM\) Updates Customers \*\*must\*\* experience a Malfunction Indicator Lamp \(MIL\) illumination and the vehicle \*\*must\*\* SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes \(DTCs\): ● P0300\-00 \- Multiple Cylinder Misfire \- in Active or Stored status set during cold start catalyst heating. ● P0301\-00 \- Cylinder 1 Misfire \- in Active or Stored status set during cold start catalyst heating. ● P0302\-00 \- Cylinder 2 Misfire \- in Active or Stored status set during cold start catalyst heating. ● P0303\-00 \- Cylinder 3 Misfire \- in Active or Stored status set during cold start catalyst heating. ● P0304\-00 \- Cylinder 4 Misfire \- in Active or Stored status set during cold start catalyst heating. ● P0305\-00 \- Cylinder 5 Misfire \- in Active or Stored status set during cold start catalyst heating. ● P0306\-00 \- Cylinder 6 Misfire \- in Active or Stored status set during cold start catalyst heating.\*\* ● P2097 \- Downstream Fuel Trim System 1 Rich. ● P2099 \- Downstream Fuel Trim System 2 Rich. \*\*Customers may comment on one or more of the following: ● Vehicle has a rough idle. ● Engine has a miss. ● Noisy valvetrain.\*\* ● Lack power/responsiveness for the first couple of minutes or about 90 seconds after a cold start and later performs as expected. This bulletin involves reprogramming the PCM with the latest available software.
- [18\-016\-26](/bulletins/11028769.md), 2026-02-12, Service bulletin: ELECTRICAL SYSTEM; ENGINE. Flash: Powertrain Control Module \(PCM\) Updates Customers may experience a Malfunction Indicator Lamp \(MIL\) illumination and the vehicle may exhibit/set one or more of the following Diagnostic Trouble Codes \(DTCs\): ● P0300\-00 \- Multiple Cylinder Misfire \- in Active or Stored status set during cold start catalyst heating. ● P0301\-00 \- Cylinder 1 Misfire \- in Active or Stored status set during cold start catalyst heating. ● P0302\-00 \- Cylinder 2 Misfire \- in Active or Stored status set during cold start catalyst heating. ● P0303\-00 \- Cylinder 3 Misfire \- in Active or Stored status set during cold start catalyst heating. ● P0304\-00 \- Cylinder 4 Misfire \- in Active or Stored status set during cold start catalyst heating. ● P0305\-00 \- Cylinder 5 Misfire \- in Active or Stored status set during cold start catalyst heating. ● P0306\-00 \- Cylinder 6 Misfire \- in Active or Stored status set during cold start catalyst heating. Customers may comment on one or more of the following: ● Vehicle has a rough idle. ● Engine has a miss. ● Noisy valvetrain. This bulletin involves reprogramming the PCM with the latest available software.
- [S2607000002](/bulletins/11028742.md), 2026-02-12, Service bulletin: ENGINE. Hemi Water Pump Coolant Leak Inspection
- [109727](/bulletins/11027837.md), 2026-01-28, Service bulletin: ENGINE. Water Pump \& Chain Case Cover
- [109724](/bulletins/11027836.md), 2026-01-28, Service bulletin: ENGINE. Water Pump \& Chain Case Cover

JSON: [/v1/bulletins/11001237](/v1/bulletins/11001237)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%2007-005-24&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F11001237&vehicle=Service%20bulletin%2007-005-24)