# Other 97892

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Other
- NHTSA id: 11000172
- Published by NHTSA: 2024\-05\-16
- Manufacturer's number: 97892
- Manufacturer's date: 2024\-05\-08
- NHTSA component: SERVICE BRAKES; ELECTRICAL SYSTEM
- Manufacturer's system: Switch: Brake

## NHTSA's summary

SWITCH \- BRAKE

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2024/MC-11000172-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2024/MC-11000172-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Brakes, Electrical system

## Vehicles listed

- 2017 to 2023 JEEP CHEROKEE

## Recalls for the same vehicles and component

- [18V917000](/recalls/nhtsa/18V917000.md), 2018-12-20: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL
- [2018421](/recalls/tc/2018421.md), 2018-08-09: Brakes
- [18V524000](/recalls/nhtsa/18V524000.md), 2018-08-09: ELECTRICAL SYSTEM:WIRING:FRONT UNDERHOOD
- [18V523000](/recalls/nhtsa/18V523000.md), 2018-08-09: SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:CALIPER
- [18V332000](/recalls/nhtsa/18V332000.md), 2018-05-17: ELECTRICAL SYSTEM:SOFTWARE; VEHICLE SPEED CONTROL:CRUISE CONTROL; ELECTRICAL SYSTEM:WIRING

## Other bulletins for the same vehicles and component

- [08\-292\-26](/bulletins/11035316.md), 2026-07-29, Service bulletin: POWER TRAIN; ELECTRICAL SYSTEM. Unable To Clear C1494\-07 And C14A9\-00 After 45A Recall Technicians may experience the following: SYMPTOM: ● wiTECH displays a mismatch error after performing recall 45A.
- [03\-002\-26](/bulletins/11035039.md), 2026-07-18, Service bulletin: ENGINE; ELECTRICAL SYSTEM. Stop/Start Illuminated, 0x22 During Fork Wear Routine Technicians may experience the following: SYMPTOM: ● Negative response 0X22 after Recall 01C flash triggers one or more communication codes with controllers.
- [S2523000003 REV.A](/bulletins/11031688.md), 2026-04-29, Service bulletin: STRUCTURE:BODY; ELECTRICAL SYSTEM. Door Latch, Handle And Ajar Additional Service Information.
- [08\-075\-26 REV. A](/bulletins/11031423.md), 2026-04-22, Service bulletin: ELECTRICAL SYSTEM. Rear Taillamp Condensation Clearing Procedure On occasion, vehicle exterior taillamp assemblies get fogged with a light layer of condensation on the SYMPTOM: inside of the lenses Fig. 1. This may be reported after the lamps have been turned on and brought up to operating temperature, turned off and then rapidly cooled by cold water \(such as rain, or the water from a vehicle wash\). Lens fogging can also occur under certain atmospheric conditions after a vehicle has been parked outside overnight \(i.e. a warm humid day followed by clear cool night\). This will usually clear as atmospheric conditions change to allow the condensation to change back into a vapor. Turning the taillamps on will usually accelerate this process. This bulletin is to communicate the procedure for rear taillamp condensation clearing.
- [9100778](/bulletins/11030150.md), 2026-03-18, Service bulletin: ELECTRICAL SYSTEM. If replacing $8474412A$ with $8474413A$ version, verify vehicle is proxied and configured properly. The 4412 part does not have RSD \(SXM\) capability. The 4413 part has RSD \(SXM\) capability and will not have an antenna connected. If replacement radio does not function, verify RSD sales code is added to configurator.
- [S1408000384 REV.J](/bulletins/11030035.md), 2026-03-13, Service bulletin: ELECTRICAL SYSTEM. Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor \(IBS\) State of Charge \(SOC\) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes \(DTCs\), or Battery Warning Lamp On
- [08\-075\-26](/bulletins/11029670.md), 2026-03-05, Service bulletin: STRUCTURE:BODY; ELECTRICAL SYSTEM. Rear Taillamp Condensation Clearing Procedure On occasion, vehicle exterior taillamp assemblies get fogged with a light layer of condensation on the SYMPTOM: inside of the lenses Fig. 1. This may be reported after the lamps have been turned on and brought up to operating temperature, turned off and then rapidly cooled by cold water \(such as rain, or the water from a vehicle wash\). Lens fogging can also occur under certain atmospheric conditions after a vehicle has been parked outside overnight \(i.e. a warm humid day followed by clear cool night\). This will usually clear as atmospheric conditions change to allow the condensation to change back into a vapor. Turning the taillamps on will usually accelerate this process. This bulletin is to communicate the procedure for rear taillamp condensation clearing.
- [S1408000384 REV.I](/bulletins/11028904.md), 2026-02-19, Service bulletin: ELECTRICAL SYSTEM. Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor \(IBS\) State of Charge \(SOC\) Inaccurate, Battery Charging Message, Presence of IBS Related Diagnostic Trouble Codes \(DTCs\), or Battery Warning Lamp On
- [109872](/bulletins/11028779.md), 2026-02-12, Service bulletin: ELECTRICAL SYSTEM. POWER TRANSFER UNIT \- NONE
- [109871](/bulletins/11028778.md), 2026-02-12, Service bulletin: ELECTRICAL SYSTEM. POWER TRANSFER UNIT \- NONE

JSON: [/v1/bulletins/11000172](/v1/bulletins/11000172)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Other%2097892&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F11000172&vehicle=Other%2097892)