# Service bulletin TSB 24\-2107

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10253892
- Published by NHTSA: 2024\-05\-02
- Manufacturer's number: TSB 24\-2107
- Manufacturer's date: 2024\-04\-15
- NHTSA component: BACK OVER PREVENTION:SOFTWARE

## NHTSA's summary

Some 2022\-2024 Bronco Raptor vehicles may exhibit an intermittent no crank/no start/discharged battery due to the presence of a parasitic battery drain. This may be due to the instrument panel cluster \(IPC\) software.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2024/MC-10253892-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2024/MC-10253892-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Driver assistance, Backup camera

## Vehicles listed

- 2022 to 2024 FORD BRONCO

## Recalls for the same vehicles and component

- [26V124000](/recalls/nhtsa/26V124000.md), 2026-03-03: BACK OVER PREVENTION:SOFTWARE
- [25V888000](/recalls/nhtsa/25V888000.md), 2025-12-18: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
- [25V273000](/recalls/nhtsa/25V273000.md), 2025-05-14: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
- [25V315000](/recalls/nhtsa/25V315000.md), 2025-05-09: BACK OVER PREVENTION:SOFTWARE
- [25V312000](/recalls/nhtsa/25V312000.md), 2025-05-09: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
- [23V165000](/recalls/nhtsa/23V165000.md), 2023-03-10: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
- [22V825000](/recalls/nhtsa/22V825000.md), 2022-11-03: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

## Other bulletins for the same vehicles and component

- [25N17](/bulletins/11030282.md), 2026-03-27, Other: LANE DEPARTURE: BLIND SPOT DETECTION; BACK OVER PREVENTION: WARNINGS; BACK OVER PREVENTION: REARVIEW SYSTEM BRAKING; UNKNOWN OR OTHER. Advance Notice – Customer Satisfaction Program 25N17 Certain 2015\-2025 Model Year Multiple Vehicle Lines Rear View Camera Replacement If Required After Dealer Evaluation
- [OTAPU0102SVDFXBr](/bulletins/10251486.md), 2024-03-07, Service bulletin: BACK OVER PREVENTION:SOFTWARE; ELECTRICAL SYSTEM. Software Update 24\-PU0102\-SVD\-FX for 2023 MY BRONCO vehicles is now available. Quality improvements include: \- Improved OTA deployment
- [OTAPU0605STBRDSC](/bulletins/10251479.md), 2024-03-07, Service bulletin: BACK OVER PREVENTION:SOFTWARE; ELECTRICAL SYSTEM. Software Update 23\- PU0605\-STBR\-DSC for 2022 MY BRONCO vehicles is now available. Quality Improvements include: \- Address incorrectly setting the Sta\-Bar Disconnect DTC issue.
- [SU4 P3 Bronco](/bulletins/10241993.md), 2023-09-07, Service bulletin: BACK OVER PREVENTION:SOFTWARE. Software Update 4 P3 for 2021\-2023 Bronco Vehicles is now available. Quality improvements include: \-Various Apple Carplay quality improvements
- [OTASYNCLCReDBron](/bulletins/10240463.md), 2023-08-04, Service bulletin: BACK OVER PREVENTION:SOFTWARE. LC SYNC \(8in screen\) updates are being redeployed for 2021\-2022 Broncos. Quality improvements include: \- Management of memory space to allow future updates.
- [SSM 51673](/bulletins/10237580.md), 2023-06-08, Service bulletin: BACK OVER PREVENTION:SOFTWARE. Some 2021\-2023 Bronco vehicles may exhibit a warning message displayed in the instrument panel cluster \(IPC\) that there is a trailer connected to the vehicle when no trailer is connected. The Workshop Manual \(WSM\), Section 417\-01 \> Trailer Lamps, has been updated with Pinpoint Test \(PPT\) J \- Message Center Displays An Incorrect Trailer Message.
- [TSB 23\-2154](/bulletins/10236575.md), 2023-05-23, Service bulletin: BACK OVER PREVENTION:SOFTWARE; POWER TRAIN. 2021\-2022 F\-150 vehicles with 2.7L, 3.3L, 3.5L EcoBoost or 5.0L engines, 2020\-2022 Transit vehicles with 3.5L Duratec/3.5L EcoBoost engines, 2021\-2023 Bronco with the 2.3L or 2.7L engine having charging system diagnostics performed in the Workshop Manual \(WSM\) may experience the generator voltage desired \(GENVDSD\) parameter identification \(PID\) missing from the powertrain control module \(PCM\) PID list in the Ford Diagnosis And Repair System \(FDRS\) scan tool. This may be due to a software parameter in the PCM. To correct the condition, follow the Service Procedure to reprogram the PCM.
- [22PU0301ESCNT](/bulletins/10235750.md), 2023-05-05, Service bulletin: BACK OVER PREVENTION:SOFTWARE. Priority Update 22\-PU0301\-ESC\-NT for 2022\-2023 Bronc vehicles is now available. Quality Improvements include: \- Change in the interaction of the EBB with Neutral Tow feature. \- Improved ESC yaw rate plausibility check
- [SSM 51407](/bulletins/10233656.md), 2023-04-04, Service bulletin: BACK OVER PREVENTION:SOFTWARE. Some 2021\-2022 Ford and Lincoln vehicles equipped with SYNC 4 may experience an error message during the gateway module \(GWM\) software update application which states Procedure Unsuccessful\- GetConfigDataFromGIVIS. This may be the result of a server related concern. To correct the condition, download and run the Ford Diagnosis and Repair System \(FDRS\) application GWM\-Read the Gateway Module A \(GWM\) Configuration Data application. When the application completes, refresh and re\-attempt the GWM\-Gateway Module A \(GWM\) Software Update application. For claiming, use causal part 14G229 and applicable labor operations in Section 10 of the Service Labor Time Standards \(SLTS\) Manual.
- [TSB 23\-2108](/bulletins/10233600.md), 2023-04-04, Service bulletin: BACK OVER PREVENTION:SOFTWARE. Some 2023 Bronco vehicles built on or before 16\-Mar\-2023 may experience an inoperative FordPass application, inoperative remote start and/or inoperative remote lock and unlock that may be combined with diagnostic trouble codes \(DTC\) U0146:09 stored in the telematics control unit \(TCU\) and U2402:00 and/or U2402:92 stored in the gateway module \(GWM\). This may be due to the software level in the GWM. To correct the condition, follow the Service Procedure to update the GWM to the latest software level via a coordinated flash.

JSON: [/v1/bulletins/10253892](/v1/bulletins/10253892)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20TSB%2024-2107&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10253892&vehicle=Service%20bulletin%20TSB%2024-2107)