# Service bulletin 24TD01\_Dealer Pa

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10253227
- Published by NHTSA: 2024\-04\-15
- Manufacturer's number: 24TD01\_Dealer Pa
- Manufacturer's date: 2024\-03\-06
- NHTSA component: WHEELS; SUSPENSION

## NHTSA's summary

DP: In the subject vehicles, the original factory toe angle setting for the front wheels may cause excessive and premature wear of the outside shoulders of the tires.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2024/MC-10253227-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2024/MC-10253227-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Suspension, Wheels

## Vehicles listed

- 2022 to 2023 TOYOTA TUNDRA HYBRID

## Other bulletins for the same vehicles and component

- [24TD01\_TI\_](/bulletins/11003611.md), 2024-07-06, Warranty extension: SUSPENSION. TECHNICAL INSTRUCTIONS FOR LIMITED SERVICE CAMPAIGN 24TD01 Premature Tire Wear CERTAIN 2022\-2023 Tundra HV TRD Pro vehicles
- [24TD01\_TI\_](/bulletins/11003556.md), 2024-07-06, Warranty extension: SUSPENSION. TECHNICAL INSTRUCTIONS FOR LIMITED SERVICE CAMPAIGN 24TD01 Premature Tire Wear CERTAIN 2022\-2023 Tundra HV TRD Pro vehicles
- [24TD01\_Dealer Pa](/bulletins/10253221.md), 2024-04-15, Service bulletin: TIRES; WHEELS. DP: In the subject vehicles, the original factory toe angle setting for the front wheels may cause excessive and premature wear of the outside shoulders of the tires.
- [T\-SB\-0042\-23](/bulletins/10241387.md), 2023-08-28, Service bulletin: WHEELS. TSB: Some 2023 ? 2024 model year Toyota vehicles use hub bolts in place of studs/nuts to fasten the wheels to the vehicle. If non\-compatible wheels or hub bolts/nuts are installed, there is increased risk that the wheel\(s\) could come off resulting in a crash. This service bulletin outlines the physical differences and precautions that should be taken when servicing different wheel and wheel fastener types.
- [TSB007022](/bulletins/10235212.md), 2023-05-01, Service bulletin: SUSPENSION; SUSPENSION:REAR:SPRINGS:AIR SUSPENSION SYSTEM; SUSPENSION:FRONT:SPRINGS:AIR SUSPENSION SYSTEM; ELECTRONIC STABILITY CONTROL:AUTOMATIC \(ASC\). TSB: Some 2023 model year Sequoia Hybrid and 2022 ? 2023 model year Tundra and Tundra Hybrid vehicles equipped with air suspension may exhibit a rough\-ride feel when driving over uneven road conditions such as bumps or dips. Follow the Repair Procedure in this bulletin to address this condition.
- [T\-SB\-0105\-22](/bulletins/10227901.md), 2022-12-19, Service bulletin: TRAILER HITCHES; WHEELS. TSB: During the manufacturing process, tires are mounted on the vehicle as matched sets to help reduce conditions such as pulling or drifting. If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation. Refer to the Tire Positioning Procedure in this bulletin to ensure that the original tires stay in the same location on the vehicle.
- [T\-SB\-0070\-22](/bulletins/10220233.md), 2022-09-15, Service bulletin: ELECTRONIC STABILITY CONTROL:AUTOMATIC \(ASC\); SUSPENSION. TSB: Some 2022 model year Tundra and Tundra Hybrid vehicles equipped with air suspension may exhibit a rough\-ride feel when driving over uneven road conditions such as bumps or dips. Follow the Repair Procedure in this bulletin to address this condition
- [T\-SB\-0068\-22](/bulletins/10220228.md), 2022-09-15, Service bulletin: SUSPENSION:FRONT:CONTROL ARM. TSB: Some 2022 model year Tundra vehicles may exhibit a howling or whistling noise from the front lower control arms at speeds of 30 ? 50 mph \(50 ? 80 km/h\).
- [T\-SB\-0031\-22 Rev](/bulletins/10220209.md), 2022-09-15, Service bulletin: WHEELS. TSB: During the manufacturing process, tires are mounted on the vehicle as matched sets to help reduce conditions such as pulling or drifting. If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation. Refer to the Tire Positioning Procedure in this bulletin to ensure that the original tires stay in the same location on the vehicle
- [TTT068922](/bulletins/10214319.md), 2022-06-21, Service bulletin: SUSPENSION:FRONT:SHOCK ABSORBER; ELECTRICAL SYSTEM; SUSPENSION:FRONT:SPRINGS:COIL SPRINGS. TT: For 2022 Tundra, the front coil spring rates are higher than the previous generation model. Special care must be taken when disassembling and reassembling the front spring and shock assemblies. Ensure the spring compressor being used can meet or exceed the load capacities below.

JSON: [/v1/bulletins/10253227](/v1/bulletins/10253227)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%2024TD01_Dealer%20Pa&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10253227&vehicle=Service%20bulletin%2024TD01_Dealer%20Pa)