# Service bulletin 2073360/2

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10252779
- Published by NHTSA: 2024\-04\-06
- Manufacturer's number: 2073360/2
- Manufacturer's date: 2024\-03\-19
- NHTSA component: ELECTRICAL SYSTEM:WIRING; ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING:COOLING SYSTEM:FAN; ENGINE AND ENGINE COOLING; VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM:ENGINE COOLANT HOSES AND FITTINGS

## NHTSA's summary

Coolant fan operation check \- Coolant high warning within the Drivers Information Panel \(DIP\) \- W12 only. Customer statement / workshop findings: Cooling fan is not spinning / operating. Coolant temperature high, warning within the Drivers Information Panel \(DIP\). Technical background: In the event the issue is evident the operative should conduct the instructions within the Measure section of this TPI.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2024/MC-10252779-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2024/MC-10252779-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Electrical system, Engine, Glass, wipers and mirrors, Heating and air conditioning, Cooling fan, Cooling system, Wiring and fuses

## Vehicles listed

- 2024 BENTLEY CONTINENTAL GT
- 2024 BENTLEY CONTINENTAL GT CABRIO
- 2024 BENTLEY FLYING SPUR HYBRID

## Other bulletins for the same vehicles and component

- [2073357/3](/bulletins/10252782.md), 2024-04-06, Service bulletin: ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM; ELECTRICAL SYSTEM:WIRING:CONNECTORS/PLUGS:ACCESORY POWER OUTLET/JACK/PORT/USB/SAE/CIGARETTE LIGHTER. Pre Delivery Inspection \(PDI\) Coolant fan operation check \(SC24/08\). Technical background: The correct operation of the cooling fan is required to be checked / confirmed The coolant fan connector must be checked to confirm the connector is located correctly within the keeper, a further check is also required to confirm the coolant fan electrical connection is plugged in / connected.

JSON: [/v1/bulletins/10252779](/v1/bulletins/10252779)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%202073360%2F2&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10252779&vehicle=Service%20bulletin%202073360%2F2)