# Service bulletin 36831.2.0

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10251153
- Published by NHTSA: 2024\-03\-04
- Manufacturer's number: 36831.2.0
- Manufacturer's date: 2024\-02\-15
- NHTSA component: ELECTRICAL SYSTEM:ADAS:CONTROL MODULE; ELECTRICAL SYSTEM

## NHTSA's summary

This is a Technical Journal: PHEV IGM P060700 Control Module Performance DTC. Erase DTCs, road test and perform new readout.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2024/MC-10251153-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2024/MC-10251153-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Driver assistance, Electrical system

## Trouble codes named

P0607

## Vehicles listed

- 2024 VOLVO S60
- 2024 VOLVO V60
- 2024 VOLVO XC60
- 2024 VOLVO XC90

## Recalls for the same vehicles and component

- [25V908000](/recalls/nhtsa/25V908000.md), 2025-12-23: BACK OVER PREVENTION:SOFTWARE
- [25V282000](/recalls/nhtsa/25V282000.md), 2025-05-08: BACK OVER PREVENTION:SOFTWARE

## Other bulletins for the same vehicles and component

- [37373.8.0](/bulletins/11036248.md), 2026-08-18, Service bulletin: ELECTRICAL SYSTEM. This is a Technical Journal: DIM Message and DTC BECM P0C7800. If the DIM displays a message stating "Drive System Service Required" and the DTC listed below is set, follow the advice under "Service". •Do not replace any parts. This is not hardware\-related. •A new BECM software is released in version 3.6.4. or later. Perform a total upgrade according to TJ 31543 and release the car back to customer.
- [37373.7.0](/bulletins/11033745.md), 2026-06-08, Service bulletin: ELECTRICAL SYSTEM. This is a Technical Journal: DIM Message and DTC BECM P0C7800.\&\#13; If the DIM displays a message stating "Drive System Service Required" and the DTC listed below is set, follow the advice under "Service".\&\#13; •Do not replace any parts. This is not hardware\-related.\&\#13; •A new Battery Energy Control Module software is released in software version 5.1.9. Perform a Total Upgrade according to TJ 31543 and release the car back to the customer.\&\#13;
- [37103.6.0](/bulletins/11033739.md), 2026-06-08, Service bulletin: ELECTRICAL SYSTEM. This is a Technical Journal: Check Engine Light/DIM message and ISGM DTC P056200 or in combination with all the DTCs
- [37103.4.0](/bulletins/11031098.md), 2026-04-07, Service bulletin: ELECTRICAL SYSTEM. This is a Technical Journal: Check Engine Light/DIM message and ISGM DTC P056200 or in combination with all the DTCs
- [36757](/bulletins/11028384.md), 2026-02-05, Service bulletin: ELECTRICAL SYSTEM. This is a Technical Journal: Text plus TJI 528994 \- Charge Lid Hard to open/close. begin with replacing the actuator in the lock mechanism
- [TJ37103.3.0\-2025\-11\-13](/bulletins/11026741.md), 2025-12-22, Service bulletin: ELECTRICAL SYSTEM. This is a Technical Journal: Check Engine Light/DIM message and ISGM DTC P056200 or in combination with all the DTCs
- [TJ37373.6.0\-2025\-11\-05](/bulletins/11026735.md), 2025-12-22, Service bulletin: ELECTRICAL SYSTEM. This is a Technical Journal: DIM Message and DTC BECM P0C7800. Structure Week 2023w47 and newer: New BECM software is released in version 3.6.4. Perform a Total Upgrade according to TJ 31543. • If the DTC sets after SW version 3.6.4 or newer has been installed, please follow VIDA fault tracing and then create a TIE Support Needed Vehicle Report. \*Structure Week 2023w46 and older: New BECM software is planned for 2026, Q1. • Please follow VIDA fault tracing and then create a TIE Support Needed Vehicle Report
- [36048](/bulletins/11021937.md), 2025-08-18, Service bulletin: FORWARD COLLISION AVOIDANCE: WARNINGS. This is a Technical Journal: Alleged issues with Intellisafe functionality. Please inform the car user of Intellisafe functionality and limitations in case of alleged issues with Intellisafe.\&\#13; The owner's manual is a good source of information together with films in the owner's manual in the car center screen about Intellisafe
- [37103](/bulletins/11021933.md), 2025-08-18, Service bulletin: ELECTRICAL SYSTEM. This is a Technical Journal: Check Engine Light/DIM message and ISGM DTC P056200.
- [37373](/bulletins/11021918.md), 2025-08-18, Service bulletin: ELECTRICAL SYSTEM. This is a Technical Journal: DIM Message and DTC BECM P0C7800.\&\#13; Structure Week 2023w47 and newer: New BECM software is released in version 3.6.4. Perform a Total Upgrade according to TJ 31543.\&\#13; •If the DTC sets after SW version 3.6.4 or newer has been installed, please follow VIDA fault tracing and then create a TIE Support Needed Vehicle Report.\&\#13; \*Structure Week 2023w46 and older: New BECM software is planned for 2026, Q1.\&\#13; •Please follow VIDA fault tracing and then create a TIE Support Needed Vehicle Report\&\#13;

JSON: [/v1/bulletins/10251153](/v1/bulletins/10251153)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%2036831.2.0&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10251153&vehicle=Service%20bulletin%2036831.2.0)