# Service bulletin A9124732073131\_1

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10250805
- Published by NHTSA: 2024\-03\-06
- Manufacturer's number: A9124732073131\_1
- Manufacturer's date: 2024\-02\-23
- NHTSA component: BACK OVER PREVENTION:SOFTWARE

## NHTSA's summary

This bulletin provides information when the DTC U178500: software error is stored passive/sporadic.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2024/MC-10250805-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2024/MC-10250805-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Driver assistance, Backup camera

## Trouble codes named

U1785

## Vehicles listed

- 2022 to 2024 AUDI A3
- 2022 to 2024 AUDI Q3
- 2022 to 2024 AUDI RS 3
- 2022 to 2024 AUDI S3

## Recalls for the same vehicles and component

- [25V082000](/recalls/nhtsa/25V082000.md), 2025-02-12: BACK OVER PREVENTION:SOFTWARE
- [22V823000](/recalls/nhtsa/22V823000.md), 2022-11-02: BACK OVER PREVENTION:DISPLAY FUNCTION
- [22V806000](/recalls/nhtsa/22V806000.md), 2022-10-26: EQUIPMENT:ELECTRICAL:INFOTAINMENT:VIDEO \(TOUCH\)SCREEN/MONITOR/UNIT; BACK OVER PREVENTION:DISPLAY FUNCTION
- [22V064000](/recalls/nhtsa/22V064000.md), 2022-02-07: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
- [21V825000](/recalls/nhtsa/21V825000.md), 2021-10-20: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

## Other bulletins for the same vehicles and component

- [A9624932070572\_2](/bulletins/10251662.md), 2024-04-04, Service bulletin: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA; UNKNOWN OR OTHER. This bulletin provides information when there is a failure of various assist systems \(00A5 DTC B200FF4\).
- [A9124612072873\_1](/bulletins/10249582.md), 2024-02-06, Service bulletin: BACK OVER PREVENTION:DISPLAY FUNCTION. This bulletin provides information for when the volume control is not working with MIB3.
- [A9023522059891\_5](/bulletins/10245687.md), 2023-12-06, Service bulletin: BACK OVER PREVENTION:DISPLAY FUNCTION. This bulletin provides information for the Audi pre sense restricted function icon displayed after the engine is started.
- [A9123402071928\_1](/bulletins/10244590.md), 2023-11-06, Service bulletin: BACK OVER PREVENTION:DISPLAY FUNCTION; EQUIPMENT:ELECTRICAL:INFOTAINMENT. This bulletin provides information for when the MMI sidebar is missing in MIB3.
- [AOS\-23\-06](/bulletins/10237411.md), 2023-06-06, Service bulletin: EQUIPMENT:ELECTRICAL; BACK OVER PREVENTION:SOFTWARE. Instructional document regarding the installation of a hotfix for the ODIS service software. Hotfix is to be used to correct a new safety\-function at J533 which blocks the adaption of the new battery using the Adapting A\-Battery function test plan
- [A9023202069778\_1](/bulletins/10233647.md), 2023-04-06, Service bulletin: BACK OVER PREVENTION:SOFTWARE. This bulletin provides a software update for when the Audi drive select mode displayed on the MMI is different from what is in the instrument cluster.
- [A9023182065960\_2](/bulletins/10233636.md), 2023-04-06, Service bulletin: BACK OVER PREVENTION:DISPLAY FUNCTION. This bulletin provides information for when the virtual cockpit is distorted due a broken screen caused by outside influence.
- [A9023172069719\_1](/bulletins/10233632.md), 2023-04-06, Service bulletin: BACK OVER PREVENTION:SOFTWARE. This bulletin provides a sofrware update for when DTC U160D00 is present and the Lane Change Assist control unit on the left side of the vehicle was previously replaced.
- [A9023162064844\_2](/bulletins/10233628.md), 2023-04-06, Service bulletin: STRUCTURE:BODY:DOOR; BACK OVER PREVENTION:DISPLAY FUNCTION. This bulletin provides instructions for when the Audi virtual cockpit display remains blank when the driver's door is opened and the driver enters the vehicle. After the ignition is switched off and back on, the display may return to normal operation, but may also remain black.
- [A9023102059891\_4](/bulletins/10233302.md), 2023-04-06, Service bulletin: BACK OVER PREVENTION:DISPLAY FUNCTION; ELECTRICAL SYSTEM. This bulletin states that it takes about 20 seconds after switching the ignition on for the Audi Pre Sense symbol advising that "Audi pre sense not available at the moment"

JSON: [/v1/bulletins/10250805](/v1/bulletins/10250805)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20A9124732073131_1&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10250805&vehicle=Service%20bulletin%20A9124732073131_1)