Service bulletin D10260A
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10249342 |
| Published by NHTSA | 2024-01-29 |
| Manufacturer's number | D10260A |
| Manufacturer's date | 2023-12-13 |
| NHTSA component | FORWARD COLLISION AVOIDANCE: SENSING SYSTEM: CAMERA; ELECTRICAL SYSTEM |
NHTSA's summary
Volvo Cars investigations have identified that the wrong part number has been assembled for the FLC2 and you will not be able to perform PDS software.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Driver assistance, Electrical system
| VOLVO S60 | 2024 |
|---|---|
| VOLVO XC40 | 2024 |
| VOLVO XC90 | 2024 |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 25V908000 | 2025-12-23. BACK OVER PREVENTION:SOFTWARE |
|---|---|
| 25V282000 | 2025-05-08. BACK OVER PREVENTION:SOFTWARE |
| 24V010000 | 2024-01-10. ELECTRICAL SYSTEM:SOFTWARE |
A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.
| 37373.8.0 | 2026-08-18. Service bulletin. This is a Technical Journal: DIM Message and DTC BECM P0C7800. If the DIM displays a message stating "Drive System Service Required" and the DTC listed below is set, follow the advice under "Service". •Do not replace any parts. This is not hardware-related. •A new BECM software is released in version 3.6.4. or later. Perform a total upgrade according to TJ 31543 and release the car back to customer. |
|---|---|
| 37373.7.0 | 2026-06-08. Service bulletin. This is a Technical Journal: DIM Message and DTC BECM P0C7800. If the DIM displays a message stating "Drive System Service Required" and the DTC listed below is set, follow the advice under "Service". •Do not replace any parts. This is not hardware-related. •A new Battery Energy Control Module software is released in software version 5.1.9. Perform a Total Upgrade according to TJ 31543 and release the car back to the customer. |
| 37103.6.0 | 2026-06-08. Service bulletin. This is a Technical Journal: Check Engine Light/DIM message and ISGM DTC P056200 or in combination with all the DTCs |
| 37103.4.0 | 2026-04-07. Service bulletin. This is a Technical Journal: Check Engine Light/DIM message and ISGM DTC P056200 or in combination with all the DTCs |
| 37376.3.0 | 2026-04-07. Service bulletin. This is a Technical Journal: Propulsion Message with DTC BECM P0A9500 and/or P0E2F00. Check the following parameters below. Utilize the High-voltage system overview to make sure that the contactors are closed while performing this check. |
| 37474 | 2026-03-02. Service bulletin. This is a Technical Journal: DC Charging Power Limited to 150 kW. Vehicles equipped with the large HBAT27 (82?kWh) battery are capable of DC charging at up to 205?kW, provided certain conditions are met—such as a low State of Charge (<20% SoC) and active battery preconditioning (by selecting a DC charger in Google Maps at least 20 minutes before arrival). |
| 36757 | 2026-02-05. Service bulletin. This is a Technical Journal: Text plus TJI 528994 - Charge Lid Hard to open/close. begin with replacing the actuator in the lock mechanism |
| TJ37103.3.0-2025-11-13 | 2025-12-22. Service bulletin. This is a Technical Journal: Check Engine Light/DIM message and ISGM DTC P056200 or in combination with all the DTCs |
| TJ37373.6.0-2025-11-05 | 2025-12-22. Service bulletin. This is a Technical Journal: DIM Message and DTC BECM P0C7800. Structure Week 2023w47 and newer: New BECM software is released in version 3.6.4. Perform a Total Upgrade according to TJ 31543. • If the DTC sets after SW version 3.6.4 or newer has been installed, please follow VIDA fault tracing and then create a TIE Support Needed Vehicle Report. *Structure Week 2023w46 and older: New BECM software is planned for 2026, Q1. • Please follow VIDA fault tracing and then create a TIE Support Needed Vehicle Report |
| 37376 | 2025-11-17. Service bulletin. This is a Technical Journal: Propulsion Message with DTC BECM P0A9500 and/or P0E2F00. Perform a "High-voltage system overview" read out. If the BECM "voltage after fuse" values (front and rear) are greater than the high voltage battery, the BECM needs to be replaced. |