WenmarOpen by Wenmar Pro

Service bulletin T-SB-0103-23

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10248814
Published by NHTSA2024-01-16
Manufacturer's numberT-SB-0103-23
Manufacturer's date2024-12-20
NHTSA componentELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING

NHTSA's summary

TSB: Some 2024 model year Grand Highlander vehicles equipped with a T24A-FTS engine may exhibit a MIL ON condition with Diagnostic Trouble Code (DTC) P05CE00 (Cold Start ?B? Camshaft Position Timing Performance Bank 1). The Engine Control Module (ECM) (SAE term: Powertrain Control Module/PCM) logic has been modified to reduce the possibility of this condition. Follow the Repair Procedure in this bulletin to address this condition.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Electrical system, Engine

Trouble codes named

P05CE

Vehicles listed
TOYOTA GRAND HIGHLANDER2024

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
25V5950002025-09-11. ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
T-SB-0104-21 Rev22026-03-07. Service bulletin. OBSOLETE NOTICE February 27, 2026: This bulletin is no longer applicable and is now obsolete.
T-SB-0060-252025-09-09. Service bulletin. Some customers of 2024 – 2025 model year Grand Highlander Hybrid vehicles may experience one or more of the following complaints when the low fuel level warning light illuminates: •The total amount of fuel dispensed during refueling is less than the customer expects when •the fuel nozzle automatically clicks off, leading to the customer not being able to put as •much fuel into the tank as they expect. •The low fuel level warning light illuminates earlier than the customer expects. •Reduced driving range compared to customers’ expectations, resulting in more frequent •refueling than customers anticipated. The combination meter software logic has been updated to help meet customer expectations.
T-SB-0058-23 Rev12025-07-10. Service campaign. The air conditioning dye injection tool kit has been developed to aid in identifying the location of air conditioning refrigerant leaks. The procedures outlined in this Service Bulletin aid in locating, inspecting, and repairing refrigerant leaks.
T-SB-0037-252025-06-06. Service bulletin. Some 2024 – 2025 model year Grand Highlander and Grand Highlander Hybrid vehicles may exhibit a condition where the Blind Spot Monitor (BSM) system is inoperative, there is a BSM malfunction message on the multi-information display (MID), or the driving assist information indicator is illuminated, along with one or more of the following Diagnostic Trouble Codes (DTCs) present: •C1AB413 – Outer Mirror Indicator (Module "B" Side) Circuit Open •C1AB513 – Outer Mirror Indicator (Module "A" Side) Circuit Open The BSM sensor software has been updated to reduce the possibility of these conditions.
T-TT-0779-252025-06-06. Service bulletin. To assist with the early detection and early resolution of audio related concerns you may be asked to recover MMR data from the head unit. The following steps are instructions on how to retrieve the data from the system and are only to be used when requested by FTS and/or FPE.
T-SB-0037-252025-05-15. Service bulletin. Some 2024 – 2025 model year Grand Highlander and Grand Highlander Hybrid vehicles may exhibit a condition where the Blind Spot Monitor (BSM) system is inoperative, there is a BSM malfunction message on the multi-information display (MID), or the driving assist information indicator is illuminated, along with one or more of the following Diagnostic Trouble Codes (DTCs) present: •C1AB413 – Outer Mirror Indicator (Module "B" Side) Circuit Open •C1AB513 – Outer Mirror Indicator (Module "A" Side) Circuit Open The BSM sensor software has been updated to reduce the possibility of these conditions.
T-TT-0779-252025-05-15. Service bulletin. To assist with the early detection and early resolution of audio related concerns you may be asked to recover MMR data from the head unit. The following steps are instructions on how to retrieve the data from the system and are only to be used when requested by FTS and/or FPE.
T-SB-0021-252025-04-08. Service bulletin. Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Global Techstream+ (GTS+) ECU flash reprogramming procedures and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard+ (CUW+). To ensure the correct ECU software is installed, ECUs will require a Security Signature before the ECU will initialize the flash reprogramming sequence. This bulletin also details the process for acquiring a Security Signature from TIS during the GTS+ ECU flash reprogramming process.
T-SB-0013-24 Rev12025-04-08. Service bulletin. The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased and can never be reused. Another feature, Add/Remove Key, is also available. Once a key is removed, it can never be reused.
T-SB-0107-20 Rev22025-03-25. Service bulletin. OBSOLETE NOTICE February 11, 2025: This bulletin is now obsolete. Please see T-SB-0021-25.