Service bulletin SSM 52142
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10248059 |
| Published by NHTSA | 2024-01-02 |
| Manufacturer's number | SSM 52142 |
| Manufacturer's date | 2023-12-19 |
| NHTSA component | BACK OVER PREVENTION:SOFTWARE |
NHTSA's summary
Some 2024 Mustang vehicles may exhibit an intermittent no crank/no start condition with various loss of communication diagnostic trouble codes (DTCs) stored in various modules and multiple illuminated warning indicators such as: anti-lock brake system (ABS) warning indicator, parking brake (red) indicator, brake warning indicator, parking brake (yellow) warning indicator and/or parking brake (red) indicator and/or stability-traction control indicator displayed in the instrumental panel cluster (IPC). To correct the condition, reprogram the ABS module using the latest software level of the Ford Diagnosis and Repair System (FDRS) diagnostic scan tool. For claiming, use the causal part number 2005 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Driver assistance, Backup camera
| FORD MUSTANG | 2024 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 25V315000 | 2025-05-09. BACK OVER PREVENTION:SOFTWARE |
|---|
A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.
| TSB 24-2047 | 2024-03-07. Service bulletin. Some 2024 Mustang vehicle's quiet start feature may be inoperative during a remote start event. This may be due to the software level of the powertrain control module (PCM). To correct this condition, perform the Service Procedure below to reprogram the PCM to the latest software level using the Ford Diagnosis and Repair System (FDRS). |
|---|---|
| SSM 52286 | 2024-03-05. Service bulletin. Some 2024 Mustang vehicles built on and before 08-Feb-2024 may exhibit an intermittent no crank/no start condition with various loss of communication diagnostic trouble codes (DTCs) stored in various modules and multiple illuminated warning indicators such as: anti-lock brake system (ABS) warning indicator, parking brake (red) indicator, brake warning indicator, parking brake (yellow) warning indicator and/or parking brake (red) indicator and/or stability-traction control indicator displayed in the instrumental panel cluster (IPC). To correct the condition, reprogram the ABS module using the latest software level of the Ford Diagnosis and Repair System (FDRS) diagnostic scan tool. For claiming, use the causal part number 2005 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual. |