# Service bulletin PIT4534D

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10247657
- Published by NHTSA: 2023\-12\-26
- Manufacturer's number: PIT4534D
- Manufacturer's date: 2013\-04\-01
- NHTSA component: ELECTRICAL SYSTEM:WIRING:POSITION/LIMIT SENSOR/SWITCH; ELECTRICAL SYSTEM; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; UNKNOWN OR OTHER; AIR BAGS

## NHTSA's summary

Diagnostic Tip \- Driver Information Center \(DIC\) Switch Buttons Are Inoperative.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2013/MC-10247657-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2013/MC-10247657-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Air bags, Electrical system, Instrument cluster, Wiring and fuses

## Vehicles listed

- 2008 to 2014 BUICK ENCLAVE
- 2007 to 2014 GMC ACADIA
- 2007 to 2010 SATURN OUTLOOK

## Recalls for the same vehicles and component

- [14V223000](/recalls/nhtsa/14V223000.md), 2014-04-30: ELECTRICAL SYSTEM:SOFTWARE; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; FUEL SYSTEM, GASOLINE

## Other bulletins for the same vehicles and component

- [PIT4720C](/bulletins/10247668.md), 2023-12-26, Service bulletin: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; ELECTRICAL SYSTEM. Odometer Servicing When The Odometer Cannot Be Set To The Actual Mileage.
- [14007A](/bulletins/10246831.md), 2023-12-11, Service bulletin: ELECTRICAL SYSTEM:INSTRUMENT PANEL:FUEL GAUGE. PSR\-Inaccurate Fuel Level Readings
- [14007](/bulletins/10246830.md), 2023-12-11, Service bulletin: ELECTRICAL SYSTEM:INSTRUMENT PANEL:FUEL GAUGE. PSR \-Inaccurate Fuel Level Radings
- [130089008](/bulletins/10246630.md), 2023-12-11, Service bulletin: ELECTRICAL SYSTEM:WIRING. GM Wiring Repair Strategy Information
- [PIT4720C](/bulletins/10245307.md), 2023-11-20, Service bulletin: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. Odometer Servicing When The Odometer Cannot Be Set To The Actual Mileage.
- [07\-08\-49\-020R](/bulletins/10244214.md), 2023-10-18, Service bulletin: ELECTRICAL SYSTEM; EQUIPMENT; ELECTRICAL SYSTEM:INSTRUMENT PANEL:SPEEDOMETER/ODOMETER. This informational bulletin provides information for the IPC odometer programming method quick reference guide.
- [PIT5962](/bulletins/10230693.md), 2023-01-30, Service bulletin: ELECTRICAL SYSTEM:WIRING. This Preliminary information communicates a GM part number for reflective high temperature heat or insulating tape when repairing wiring harnesses.
- [07\-08\-49\-020J](/bulletins/10190504.md), 2021-04-20, Service bulletin: ELECTRICAL SYSTEM:INSTRUMENT PANEL:SPEEDOMETER/ODOMETER; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. IPC Odometer Programming Method Quick Reference Guide Season Odometer Programming Methods in Use Today 1. IPC reprogramming and setup using the service programming system \(SPS\). 2. Odometer setup at the electronic service center \(ESC\) when using an exchange IPC/DIC. 3. Tech 2® – The Tech 2 is used to set up a replacement BCM, which includes loading the odometer value that is displayed and stored in the IPC. A replacement IPC will display the previously stored vehicle odometer value, communicated from the BCM, after cycling the ignition or driving the vehicle. \*The odometer programming is integrated as part of the BCM programming procedure. It is not a stand\-alone event.
- [070849020M](/bulletins/10190320.md), 2021-04-16, Service bulletin: ELECTRICAL SYSTEM:INSTRUMENT PANEL:SPEEDOMETER/ODOMETER:SENSOR/SENDING UNIT; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. IPC Odometer Programming Method Quick Reference Guide
- [PIT4534G](/bulletins/10184104.md), 2020-12-14, Service bulletin: ELECTRICAL SYSTEM; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; EQUIPMENT. This Preliminary Information communication provides information to the technician about vehicle that have the Driver Information Center button inoperative. Technician will insure the connectors to the Instrument Panel Cluster and the DIC witch are connected and then remove the \(IPC/DSPLY\) fuse. Reinstall the fuse after a few seconds to return the function of the Driver Information Center switch to normal.

JSON: [/v1/bulletins/10247657](/v1/bulletins/10247657)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20PIT4534D&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10247657&vehicle=Service%20bulletin%20PIT4534D)