Service bulletin 14086
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10247297 |
| Published by NHTSA | 2023-12-18 |
| Manufacturer's number | 14086 |
| Manufacturer's date | 2014-05-01 |
| NHTSA component | ELECTRICAL SYSTEM:12V/24V/48V BATTERY:CABLES; ELECTRICAL SYSTEM:BODY CONTROL MODULE/BCM; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; UNKNOWN OR OTHER |
NHTSA's summary
Stop Lamp Flickering
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Electrical system, 12-volt battery, Body control module, Instrument cluster
| CHEVROLET SONIC | 2014 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 20-NA-132 | 2024-04-05. Service bulletin. This warranty administration bulletin provides policy information on the requirements for 12V battery testing and warranty replacements. |
|---|---|
| PIT4720C | 2023-12-26. Service bulletin. Odometer Servicing When The Odometer Cannot Be Set To The Actual Mileage. |
| PIT5074H | 2023-12-11. Service bulletin. J-35616-64B Terminal Test Probe / Replacement Terminal / Terminated Lead. |
| PIT5074G | 2023-12-11. Service bulletin. Terminal Test Probe And Replacement Terminal. |
| PIC5703A | 2023-12-11. Service bulletin. Fuel Gauge Inoperative. |
| 1408117001a | 2023-12-11. Service bulletin. Unable to Clear BCM DTCs After Completing Repair |
| PIT4720C | 2023-11-20. Service bulletin. Odometer Servicing When The Odometer Cannot Be Set To The Actual Mileage. |
| 07-08-49-020R | 2023-10-18. Service bulletin. This informational bulletin provides information for the IPC odometer programming method quick reference guide. |
| 07-08-49-020J | 2021-04-20. Service bulletin. IPC Odometer Programming Method Quick Reference Guide Season Odometer Programming Methods in Use Today 1. IPC reprogramming and setup using the service programming system (SPS). 2. Odometer setup at the electronic service center (ESC) when using an exchange IPC/DIC. 3. Tech 2® – The Tech 2 is used to set up a replacement BCM, which includes loading the odometer value that is displayed and stored in the IPC. A replacement IPC will display the previously stored vehicle odometer value, communicated from the BCM, after cycling the ignition or driving the vehicle. *The odometer programming is integrated as part of the BCM programming procedure. It is not a stand-alone event. |
| 070849020M | 2021-04-16. Service bulletin. IPC Odometer Programming Method Quick Reference Guide |