# Service bulletin 14076C

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10247285
- Published by NHTSA: 2023\-12\-18
- Manufacturer's number: 14076C
- Manufacturer's date: 2014\-09\-01
- NHTSA component: BACK OVER PREVENTION; ENGINE

## NHTSA's summary

Engine Noise ? DTC P0324

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2014/MC-10247285-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2014/MC-10247285-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Driver assistance, Engine, Backup camera

## Trouble codes named

P0324

## Vehicles listed

- 2014 CHEVROLET SPARK

## Other bulletins for the same vehicles and component

- [14076B](/bulletins/10247284.md), 2023-12-18, Service bulletin: BACK OVER PREVENTION; ENGINE. Engine Noise ? DTC P0324
- [14076A](/bulletins/10247283.md), 2023-12-18, Service bulletin: ENGINE; BACK OVER PREVENTION. Engine Noise ? DTC P0324
- [070601016G](/bulletins/10213761.md), 2022-06-13, Service bulletin: BACK OVER PREVENTION. This informational bulletin provides information on Internal Engine Noise or Damage After Oil Filter Replacement.
- [PI1284A](/bulletins/10137679.md), 2018-05-21, Service bulletin: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA. This preliminary information bulletin provides information to the customer that the rear vision camera only shows 3/4 of the radio display screen and is a normal characteristic in which no parts are to be replaced for this condition.
- [16NA347](/bulletins/10135281.md), 2018-05-07, Service bulletin: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA; ELECTRICAL SYSTEM; STEERING. This technical bulletin provides a procedure to reprogram the radio to correct a condition of Right Hand Steering Wheel Controls Inoperative, Outside Ambient Temperature Reading on Radio Display Inoperative, and/or Rear Vision Camera Gridlines Inoperative after Performing 17130 or 45340 Radio Reprogramming due to an internal calibration concern.
- [10\-00\-89\-006C](/bulletins/10133103.md), 2018-04-16, Service bulletin: BACK OVER PREVENTION: SENSING SYSTEM: RADAR. This informational bulletin provides directions on submitting different PIRs
- [16\-NA\-347](/bulletins/10116545.md), 2017-08-31, Service bulletin: WHEELS; STEERING; BACK OVER PREVENTION: CAMERA SYSTEM. This technical bulletin provides a procedure to reprogram the radio to correct a condition of Right Hand Steering Wheel Controls Inoperative, Outside Ambient Temperature Reading on Radio Display Inoperative, and/or Rear Vision Camera Gridlines Inoperative after Performing 17130 or 45340 Radio Reprogramming due to an internal calibration concern.
- [PIC6122](/bulletins/10114695.md), 2017-08-15, Service bulletin: BACK OVER PREVENTION; ELECTRICAL SYSTEM:SOFTWARE; SERVICE BRAKES. This Preliminary Information communication provides information to the technician about having an intermittent whine, howl, hum, buzz noise or vibration during regenerative braking or while backing up. Technician will find P061B set. Technician should update the Hybrid Powertrain Control Module with the latest software using Service Programming System.
- [PIC5611E](/bulletins/10114072.md), 2017-08-15, Service bulletin: EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.; BACK OVER PREVENTION: CAMERA SYSTEM. This Preliminary Information communication provides information to the technician about the rear view camera options on the vehicles equipped with rear view camera. The rear view camera brightness can be adjusted on some models while the transmission is in reverse and using the Menu or Select button. To turn off or on the guidelines in the rear view camera, use the radio display Config icon then Display, then the guidelines option.

JSON: [/v1/bulletins/10247285](/v1/bulletins/10247285)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%2014076C&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10247285&vehicle=Service%20bulletin%2014076C)