Service bulletin PIC5728B
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10247012 |
| Published by NHTSA | 2023-12-11 |
| Manufacturer's number | PIC5728B |
| Manufacturer's date | 2012-12-01 |
| NHTSA component | EXTERIOR LIGHTING; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL |
NHTSA's summary
False Low Beam Failure Message Displayed.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Electrical system, Lighting, Instrument cluster
| CADILLAC ATS | 2013 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| PIC5741B | 2023-12-11. Service bulletin. Multiple DTCs Set When Using Scan Tool Device. |
|---|---|
| PIC5741A | 2023-12-11. Service bulletin. Multiple DTCs Set When Using Scan Tool Device. |
| PIC5741 | 2023-12-11. Service bulletin. Multiple DTCs Set When Using Scan Tool Device. |
| PIC5728D | 2023-12-11. Service bulletin. False Low Beam Failure Message Displayed. |
| PIC5728C | 2023-12-11. Service bulletin. False Low Beam Failure Message Displayed. |
| PIC5728A | 2023-12-11. Service bulletin. False Low Beam Failure Message Displayed. |
| PIC5728 | 2023-12-11. Service bulletin. False Low Beam Failure Message Displayed. |
| 130089004H | 2023-12-11. Service bulletin. Car and Truck Fix it Right the First Time Issues |
| 07-08-49-020R | 2023-10-18. Service bulletin. This informational bulletin provides information for the IPC odometer programming method quick reference guide. |
| 07-08-49-020J | 2021-04-20. Service bulletin. IPC Odometer Programming Method Quick Reference Guide Season Odometer Programming Methods in Use Today 1. IPC reprogramming and setup using the service programming system (SPS). 2. Odometer setup at the electronic service center (ESC) when using an exchange IPC/DIC. 3. Tech 2® – The Tech 2 is used to set up a replacement BCM, which includes loading the odometer value that is displayed and stored in the IPC. A replacement IPC will display the previously stored vehicle odometer value, communicated from the BCM, after cycling the ignition or driving the vehicle. *The odometer programming is integrated as part of the BCM programming procedure. It is not a stand-alone event. |