# Service bulletin PIC5398C

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10246901
- Published by NHTSA: 2023\-12\-11
- Manufacturer's number: PIC5398C
- Manufacturer's date: 2014\-02\-01
- NHTSA component: STRUCTURE; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL

## NHTSA's summary

Mist From Instrument Panel Vents, Moisture On Windshield Or Water On Floor

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2014/MC-10246901-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2014/MC-10246901-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Body and frame, Electrical system, Instrument cluster

## Vehicles listed

- 2010 to 2014 BUICK LACROSSE
- 2011 to 2014 BUICK REGAL
- 2013 to 2014 CHEVROLET MALIBU

## Other bulletins for the same vehicles and component

- [PIT5195B](/bulletins/10247748.md), 2023-12-26, Service bulletin: ELECTRICAL SYSTEM:INSTRUMENT PANEL:SPEEDOMETER/ODOMETER. Speedometer Needle Accuracy Information.
- [PIT4720C](/bulletins/10247668.md), 2023-12-26, Service bulletin: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; ELECTRICAL SYSTEM. Odometer Servicing When The Odometer Cannot Be Set To The Actual Mileage.
- [PIT5195B](/bulletins/10247093.md), 2023-12-11, Service bulletin: ELECTRICAL SYSTEM:INSTRUMENT PANEL:SPEEDOMETER/ODOMETER. Speedometer Needle Accuracy Information.
- [PIC5398B](/bulletins/10246900.md), 2023-12-11, Service bulletin: STRUCTURE; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. Mist From Instrument Panel Vents, Moisture On Windshield Or Water On Floor.
- [130089004H](/bulletins/10246623.md), 2023-12-11, Service bulletin: VISIBILITY:WINDSHIELD; UNKNOWN OR OTHER; ELECTRICAL SYSTEM:SOFTWARE; EXTERIOR LIGHTING:LIGHTING CONTROL MODULE; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; VEHICLE SPEED CONTROL:THROTTLE:THROTTLE POSITION SENSOR \(TPS\). Car and Truck Fix it Right the First Time Issues
- [12238A](/bulletins/10245858.md), 2023-12-04, Service bulletin: ELECTRICAL SYSTEM; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. Loss of Battery Charge ? Inspect Generator Control Module
- [PIT4720C](/bulletins/10245307.md), 2023-11-20, Service bulletin: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. Odometer Servicing When The Odometer Cannot Be Set To The Actual Mileage.
- [07\-08\-49\-020R](/bulletins/10244214.md), 2023-10-18, Service bulletin: ELECTRICAL SYSTEM; EQUIPMENT; ELECTRICAL SYSTEM:INSTRUMENT PANEL:SPEEDOMETER/ODOMETER. This informational bulletin provides information for the IPC odometer programming method quick reference guide.
- [PIT5195G](/bulletins/10213796.md), 2022-06-13, Service bulletin: ELECTRICAL SYSTEM:INSTRUMENT PANEL:SPEEDOMETER/ODOMETER. This Preliminary Information communication provides information to the technician about vehicles that the speedometer needle appears to be inaccurate. Dealer should advise the customer the specification for speedometer needle accuracy is \+/\- 2 MPH at any given speed when looking straight at the needle.
- [07\-08\-49\-020J](/bulletins/10190504.md), 2021-04-20, Service bulletin: ELECTRICAL SYSTEM:INSTRUMENT PANEL:SPEEDOMETER/ODOMETER; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. IPC Odometer Programming Method Quick Reference Guide Season Odometer Programming Methods in Use Today 1. IPC reprogramming and setup using the service programming system \(SPS\). 2. Odometer setup at the electronic service center \(ESC\) when using an exchange IPC/DIC. 3. Tech 2® – The Tech 2 is used to set up a replacement BCM, which includes loading the odometer value that is displayed and stored in the IPC. A replacement IPC will display the previously stored vehicle odometer value, communicated from the BCM, after cycling the ignition or driving the vehicle. \*The odometer programming is integrated as part of the BCM programming procedure. It is not a stand\-alone event.

JSON: [/v1/bulletins/10246901](/v1/bulletins/10246901)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20PIC5398C&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10246901&vehicle=Service%20bulletin%20PIC5398C)