Service bulletin NTB23-055A

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
Type	Service bulletin
NHTSA id	10246437
Published by NHTSA	2023-12-08
Manufacturer's number	NTB23-055A
Manufacturer's date	2023-11-27
NHTSA component	FUEL SYSTEM, GASOLINE

NHTSA's summary

FUEL ODOR This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Fuel system

Vehicles listed
NISSAN ROGUE	2021, 2022, 2023

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
2021754	2021-12-10. Fuel System
21V957000	2021-12-09. FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP
2021062	2021-02-12. Fuel System
21V068000	2021-02-11. FUEL SYSTEM, GASOLINE:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS; FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
NTB26-006A	2026-05-30. Service bulletin. FUEL FILLER TUBE LOWER SEAL IS LEAKING AND DTC P0456 IS STORED IN THE ECM This bulletin is no longer active. Please discard previous versions of NTB26-006.
NTB26-006	2026-02-10. Service bulletin. FUEL FILLER TUBE LOWER SEAL IS LEAKING AND DTC P0456 IS STORED IN THE ECM IF YOU CONFIRM The vehicle has a visible leak with a smoke machine test coming from the fuel filler tube lower seal, AND DTC P0456 is stored as “Active”, “Past”, or “Pending” in the ECM. ACTION 1. Remove the supplied funnel from the rear of the vehicle or trunk. 2. Insert the funnel completely in the fuel filler tube and remove completely five (5) times. 3. Re-check the fuel filler tube lower seal with a smoke machine to determine visually if any leak is present. 4. If the fuel filler lower seal continues to leak, replace the fuel filler tube. IMPORTANT: The purpose of ACTION (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to successfully completing this repair.
NTB23-055B	2024-04-06. Service bulletin. FUEL ODOR This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NTB23-055	2023-07-11. Service bulletin. FUEL ODOR IF YOU CONFIRM The customer states they smell fuel, AND The MIL is not ON and there are no stored DTCs. ACTION 1. Check for evidence of any fuel leak. 2. Check for any malfunctioning fuel system or EVAP system parts. 3. If no concerns are found, replace the PCV hose with the one listed in PARTS INFORMATION following the SERVICE PROCEDURE in this bulletin.
NTB22-026	2022-06-08. Service bulletin. SERVICE INFORMATION FOR FUEL GAUGE INACCURATE WITH DTCS STORED IN ECM SERVICE INFORMATION If a fuel level sensor has been diagnosed as sending an incorrect level signal, and one or more of the following DTCs are stored in the ECM, do not replace the entire “Fuel Level Sensor Unit, Fuel Filter and Fuel Pump Assembly” (fuel pump assembly). The fuel level sensor can be replaced separately. • P0460 (FUEL LEV SEN SLOSH) • P0461 (FUEL LEVEL SENSOR) • P0462 (FUEL LEVL SEN/CIRC) • P0463 (FUEL LEVL SEN/CIRC) NOTE: Warranty claims referring to fuel level issues that result in the replacement of the entire fuel pump assembly will be charged back.
NTB17-082E	2022-03-12. Service bulletin. DTC P0456 CAUSED BY EVAP LEAK AT VENT CONTROL VALVE O-RING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NTB13-097J	2022-03-12. Service bulletin. EVAP LEAK DTC P0442, P0455, P0456 INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
PC791 2021 Rogue	2021-03-06. Service bulletin. Fuel Pump Inspection Dealer Inventory ***Dealer Announcement* Nissan is issuing a quality hold and conducting a dealer inventory quality action to inspect the fuel pump installation on 1,002 specific model year 2021 Rogue vehicles identified in Service Comm. Due to a manufacturing concern that has since been resolved, the fuel pump lock ring installation may not be complete, the fuel pump lock ring engagement may not be fully engaged, and/or the fuel feed tube locking clip at the low pressure fuel pump may not be fully installed on the applicable vehicles. Dealers should follow the procedure to remedy any of these conditions, if identified during the inspection. Affected vehicles are subject to stop sale and are either currently in dealer inventory or assigned and in transit to the dealer. Dealers must complete the inspection and if necessary, repair, prior to sale. *What Dealers Should Do*** PLEASE FOLLOW THE ATTACHED INSPECTION INSTRUCTIONS: 1. Verify if vehicles are affected by this quality action using Service Comm or DBS National Service History – Open Campaigns I.D. PC791 • New vehicles in dealer inventory can also be identified using DBS (Sales-> Vehicle Inventory, and filter by Open Campaign). • Refer to NPSB 15-460 for additional information • Please continue to check newly arriving inventory for campaign applicability. 2. Please do not drive, loan, sell or trade the specific vehicles in dealer inventory subject to this quality action. 3. Use the attached procedure to inspect and, if necessary, remedy any vehicles affected by this quality action. 4. The service department should submit the applicable warranty claim for the action performed so it can be closed on Service Comm and release the vehicle.