# Service bulletin TSB 23\-2372

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10246154
- Published by NHTSA: 2023\-12\-05
- Manufacturer's number: TSB 23\-2372
- Manufacturer's date: 2023\-11\-30
- NHTSA component: UNKNOWN OR OTHER; ENGINE AND ENGINE COOLING:COOLING SYSTEM

## NHTSA's summary

Some 2023 F\-150 vehicles equipped with a 3.5L PowerBoost engine may exhibit an illuminated engine coolant temperature warning lamp with a Motor Coolant Over Temperature message in the IPC with diagnostic trouble code \(DTC\) P0A2F:94 stored in the secondary on\-board diagnostic control module C \(SOBDMC\). This may be due to the software level of the SOBDMC. To correct this condition, perform the Service Procedure below to reprogram the SOBDMC to the latest software level via the Ford Diagnosis and Repair System \(FDRS\).

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2023/MC-10246154-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2023/MC-10246154-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Engine, Cooling system

## Trouble codes named

P0A2F

## Vehicles listed

- 2023 FORD F\-150

## Other bulletins for the same vehicles and component

- [TSB 23\-2412](/bulletins/10248363.md), 2024-01-05, Service bulletin: ENGINE AND ENGINE COOLING:COOLING SYSTEM. This article supersedes TSB 23\-2372 to add 2022 model year vehicle applications. Some 2022\-2023 F\-150 vehicles equipped with a 3.5L PowerBoost engine may exhibit an illuminated engine coolant temperature warning lamp with a Motor Coolant Over Temperature message in the IPC with diagnostic trouble code \(DTC\) P0A2F:94 stored in the secondary on\-board diagnostic control module C \(SOBDMC\). This may be due to the software level of the SOBDMC. To correct this condition, perform the Service Procedure below to reprogram the SOBDMC to the latest software level via the Ford Diagnosis and Repair System \(FDRS\).

JSON: [/v1/bulletins/10246154](/v1/bulletins/10246154)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20TSB%2023-2372&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10246154&vehicle=Service%20bulletin%20TSB%2023-2372)