WenmarOpen by Wenmar Pro

Service bulletin 12-08-51-002P

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10243746
Published by NHTSA2023-10-10
Manufacturer's number12-08-51-002P
Manufacturer's date2023-09-14
NHTSA componentEQUIPMENT; STRUCTURE

NHTSA's summary

This informational bulletin provides technicians and dealership personnel with spray-in bed liner general information and repair procedures.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Body and frame, Equipment and accessories

Vehicles listed
CHEVROLET COLORADO2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
CHEVROLET SILVERADO 15002014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024 (the catalog's model; the bulletin names a series or trim of it)
CHEVROLET SILVERADO 25002013, 2014 (the catalog's model; the bulletin names a series or trim of it)
CHEVROLET SILVERADO 35002013, 2014 (the catalog's model; the bulletin names a series or trim of it)
GMC CANYON2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
GMC HUMMER EV PICKUP2022, 2023
GMC HUMMER EV SUV2024
GMC SIERRA 15002014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024 (the catalog's model; the bulletin names a series or trim of it)
GMC SIERRA 25002013, 2014 (the catalog's model; the bulletin names a series or trim of it)
GMC SIERRA 35002013, 2014 (the catalog's model; the bulletin names a series or trim of it)

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
20253502025-06-25. Structure
20250522025-02-06. Structure
25V0600002025-02-06. STRUCTURE:BODY:BUMPERS:ACTIVE SHUTTERS/GRILL
20240612024-02-01. Structure
20221602022-03-31. Accessories
21V4970002021-07-01. EQUIPMENT:OTHER:LABELS
21V4960002021-07-01. EQUIPMENT:ELECTRICAL:ENGINE BLOCK HEATER
20V3240002020-06-04. LATCHES/LOCKS/LINKAGES:HOOD:LATCH; STRUCTURE:BODY:HOOD
20201652020-04-16. Accessories
20200972020-03-12. Structure

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
25-NA-1272025-11-05. Service bulletin. This technical bulletin provides a procedure to correct the condition of Air Inlet Panel Extension Assembly May Become Disengaged After Hood Open Beyond the Prop Rod Height.
PIE08342025-09-10. Service bulletin. This engineering information (EI) is requesting information from technicians to perform the check list provided and contact the engineer listed in regards the hood will not latch, open and/or gets stuck, hood ajar message displayed on driver information center (DIC), DTCs P257D, P257E, P257F, B1C80, B1C81, B1C85, B1C89, B1C8C, B1C8D, B1CB5 , B1CBF set.
25-NA-1142025-09-06. Service bulletin. This informational bulletin provides information on Anti-Chip Coating Appearance.
24-NA-0292025-07-07. Service bulletin. This informational bulletin provides information on HUMMER EV Water Leak Diagnostic Tips.
23-NA-0972025-06-16. Service bulletin. This service bulletin provides a procedure to correct a customer concern of Upper Glove Box Door does not Open when the Button is Depressed or Takes Multiple Presses to Open.
25-NA-0412025-06-11. Service bulletin. This technical bulletin provides repair information to correct a customer concern of Wireless Charger Starts Then Stops Charging.
24-NA-1512025-06-07. Service bulletin. This technical bulletin provides repair information to correct a customer concern of Loose Roof Ditch Molding.
24-NA-0282025-05-02. Service bulletin. This service bulletin provides information on Power Tonneau Cover Diagnostic Tips.
25-NA-0572025-04-14. Service bulletin. This technical bulletin provides a procedure to correct the condition of Front Wheel Opening Moldings Not Flush and/or Poor Fitment.
19-NA-2552025-04-10. Service bulletin. This service bulletin provides frame coating repair information to correct a customer concern of wax coating on frame peeling, metal shows corrosion/rusting (U.S. and Canada Only).