WenmarOpen by Wenmar Pro

Service bulletin 22G06

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10243408
Published by NHTSA2023-10-03
Manufacturer's number22G06
Manufacturer's date2023-09-30
NHTSA componentSTEERING:STEERING WHEEL /HANDLE BAR:HAND HEATER/COOLER; EQUIPMENT

NHTSA's summary

Certain 2023 Model Year F-150 Vehicles - Heated Steering Wheel Performance Upgrade

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Equipment and accessories, Steering

Vehicles listed
FORD F-1502023

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
24V8520002024-11-08. EQUIPMENT:OTHER:LABELS
23V8470002023-12-15. STEERING:COLUMN; AIR BAGS:FRONTAL:DRIVER CLOCKSPRING/SPIRAL CASSETTE

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
SSM 548202026-05-18. Service bulletin. Some 2021-2023 F-150 vehicles may exhibit diagnostic trouble code (DTC) U023A:08 in the steering column control module (SCCM) after reprogramming the SCCM with no customer symptoms present. If the vehicles automatic high beam operation is fully functional, this DTC does not affect vehicle operation, and no additional diagnosis or service is required for this condition. Replacement or reprogramming of the SCCM or image processing module A (IPMA) will not resolve this condition. To validate that the automatic high beam system is fully operational, cover the light sensor located in the middle of the dashboard to activate the automatic low beam headlamps. Push the steering wheel multifunction switch forward to cycle through both high beam settings which will be represented in the instrument cluster panel (IPC) as a white telltale (automatic mode - the high beams will not turn on while testing) and a blue telltale (manual mode - the high beams will turn on). If any of the telltales did not illuminate when the steering wheel multifunction switch is pressed forward, refer to the Workshop Manual (WSM)
TSB 24-21262024-05-04. Service bulletin. This article supersedes TSB 24-2093 to address the revised software and include affected 3.5L FHEV vehicles. Some 2021-2023 F-150 vehicles equipped with a gasoline, hybrid or flex fuel engine (non-Lightning) except 2023 F-150 with 3.3L may exhibit inoperative A/C, lack of air flow, blows warm, and/or evidence of the evaporator freezing. This may be due to the software level of the PCM and heating, ventilation and air conditioning (HVAC) module.
TSB 24-21162024-05-04. Service bulletin. Some 2023 F-150 vehicles equipped with a 3.5L PowerBoost engine may exhibit a Trailer Brake System Fault See Manual message in the instrument panel cluster (IPC) and/or diagnostic trouble codes (DTCs) U0140:87, U0143:87, and/or U0444:82 stored in the trailer module (TRM). These symptoms can occur without a trailer connected to the vehicle. This may be due to the software level of the gateway module A (GWM).
SSM 524762024-05-03. Service bulletin. All accessory stick-on keyless entry keypads come with a wallet card containing the master code. If the accessory keypad was factory installed, this card will be placed in the glove box and should be handed to the vehicles owner during initial delivery. Unlike the integrated (wired) factory keypad, the accessory keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool. If the wallet card for an accessory keypad is lost, follow these steps to recover the code. Dealer Key Code access is granted through the Dealer Program Enrollment System (DPES); dealership management can authorize users. The authorized user must go to FMCDealer.com > Parts and Service > Parts Product Line Information > Keys/Entry Devices > Aftermarket Keyless Entry Keypad Code Access. Follow the instructions on the screen to obtain the master code for the accessory keypad.
OTAPU0904PPOPRPF2024-04-04. Service bulletin. Quality Improvements include: -Enhance the performance and stability of your driver display while towing.
OTAPU0121FTDIFXF2024-04-04. Service bulletin. Quality Improvements include: -Robustness action in operation of vehicle to detect low-state-of-charge battery and prevent engine stall, as well as provide improved warning to customers when low-state-of-charge conditions exist. -To prevent the potential incorrect On-board scales.
OTAPU102410CHAUL2024-04-04. Service bulletin. Quality Improvements include: - Fix the no audio out of random speakers issue.
OTAPU10246CHAUDF2024-04-04. Service bulletin. Quality Improvements include: - Fix the infrequent random audio noises issue and improve the audio quality of the vehicle.
OTAPU10246CHAUDL2024-04-04. Service bulletin. Quality Improvements include: - Fix the infrequent random audio noises issue and improve the audio quality of the vehicle.
SSM 523702024-04-04. Service bulletin. Some 2023-2024 F-150 and 2024 Bronco/Transit vehicles may exhibit Apple Carplay Bluetooth connectivity concerns. This may be due to the accessory protocol interface module (APIM) software. To correct this concern, perform a soft reset by pressing the Power and Seek Foward buttons for 5 seconds, or use the SYNC Module Reset function of the Ford Diagnosis and Repair System (FDRS). For claiming, use causal part 14G670 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.