Service bulletin S2323000063
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10243144 |
| Published by NHTSA | 2023-10-02 |
| Manufacturer's number | S2323000063 |
| Manufacturer's date | 2023-08-04 |
| NHTSA component | UNKNOWN OR OTHER; EXTERIOR LIGHTING:TAIL LIGHTS |
NHTSA's summary
Outer Tail Lamp Front Edge Has A Gap To The Quarter Panel Or Tail Lamp Appears Loose.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Lighting, Tail lights
| JEEP GRAND CHEROKEE | 2021, 2022, 2023 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 22V544000 | 2022-07-28. EXTERIOR LIGHTING:TAIL LIGHTS |
|---|
A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.
| 0811223 | 2023-05-30. Service bulletin. Rear Tail Lamp Condensation Clearing Procedure Some customers may report that on occasion, vehicle exterior tail lamp assemblies are fogged with a light layer of condensation on the inside of the lenses. This may be reported after the lamps have been turned on and brought up to operating temperature, turned off, and then rapidly cooled by cold water (such as rain, or the water from a vehicle wash). This bulletin is to communicate the procedure for rear tail lamp condensation clearing. |
|---|---|
| 82973 | 2022-12-19. Service bulletin. LAMP - TAIL |
| 08-037-22 | 2022-06-27. Service bulletin. Rear Tail Lamp Condensation Clearing Procedure This bulletin is to communicate the procedure for rear tail lamp condensation clearing. Some customers may report that on occasion, vehicle exterior tail lamp assemblies are fogged with a light layer of condensation on the inside of the lenses. This may be reported after the lamps have been turned on and brought up to operatingtemperature, turned off, and then rapidly cooled by cold water (such as rain, or the water from a vehicle wash). Lens fogging can also occur under certain atmospheric conditions after a vehicle has been parked outside overnight (i.e., a warm humid day followed by clear cool night). This will usually clear as atmospheric conditions change to allow the condensation to change back into avapor. Turning the tail lamps on will usually accelerate this process.Clear Tail Lamp AssemblyTail Lamp Assembly with CondensationImages are not specific to vehicle, and only used for showing the tail lamps either clearFig. 1or having a condensation build up within the tail lamp assemblyFig. 2per the procedure. |