# Service bulletin SM532014

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10242630
- Published by NHTSA: 2023\-09\-25
- Manufacturer's number: SM532014
- Manufacturer's date: 2014\-06\-04
- NHTSA component: UNKNOWN OR OTHER; AIR BAGS: AIR BAG/RESTRAINT CONTROL MODULE

## NHTSA's summary

Module

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2014/MC-10242630-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2014/MC-10242630-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Air bags, Air bag control module

## Vehicles listed

- 2011 to 2014 AUDI A6

## Other bulletins for the same vehicles and component

- [A201788 2043357\-](/bulletins/10128200.md), 2018-02-05, Service bulletin: COMMUNICATION; FUEL SYSTEM, OTHER; AIR BAGS:FRONTAL:SENSOR/CONTROL MODULE\-INACTIVE. This technical service bulletin provides a software code for correcting an issue that causes DTC P046100.
- [A691428 2023323\-](/bulletins/10122295.md), 2017-11-08, Service bulletin: AIR BAGS:FRONTAL:SENSOR/CONTROL MODULE\-INACTIVE; AIR BAGS. Supersedes Technical Service Bulletin Group 69 number 13\-26 dated October 21, 2013. After the airbag control module \(J234\) has been replaced, the control unit cannot be coded via SVM spec/actual. An SVM code is required to code and parameterize the new service replacement airbag control module. Each model's SVM code is provided in a parts bulletin \(GP bulletin\), which should have been referenced through ETKA when the module was replaced. The control module cannot be coded until the SVM code has been executed. If the SVM code was not acquired through the GP bulletin in ETKA, follow the instructions in the Service section of this bulletin to update the control module.
- [TSB\-69\-11\-20](/bulletins/10043389.md), 2012-03-26, Service bulletin: AIR BAGS:FRONTAL:SENSOR/CONTROL MODULE\-INACTIVE; AIR BAGS. AUDI: SOME MODEL YEAR VEHICLES MUST HAVE THE SERVICE PART FOR THE AIRBAG CONTROL UNIT CODED AND/OR PARAMETER USING SVM CODE LISTED IN ETKA. MODELS A4, S4, A5, S5, Q5, TT, TTS, A3, PA , C6, A6 PA, D4, A8,C7 A7. \*PE

JSON: [/v1/bulletins/10242630](/v1/bulletins/10242630)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20SM532014&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10242630&vehicle=Service%20bulletin%20SM532014)