# Service bulletin 23\-DS\-004G

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10241898
- Published by NHTSA: 2023\-09\-06
- Manufacturer's number: 23\-DS\-004G
- Manufacturer's date: 2023\-08\-30
- NHTSA component: SUSPENSION

## NHTSA's summary

Certain GV70 \(JK1 and JK1A\), GV80 \(JX1\) and G80 \(RG3\) vehicles may have a noise condition from the rear differential at certain speeds while accelerating or decelerating. This bulletin describes the procedure to inspect the vehicle for noise and if necessary to tighten the lock nut or if necessary replace the differential.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2023/MC-10241898-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2023/MC-10241898-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Suspension

## Vehicles listed

- 2021 to 2023 GENESIS G80
- 2022 to 2023 GENESIS GV70
- 2021 to 2023 GENESIS GV80

## Other bulletins for the same vehicles and component

- [22\-01\-053G](/bulletins/10253041.md), 2024-04-11, Service bulletin: SUSPENSION. Certain 2022 GV70 \(JK1\) vehicles may have the driver\-side rear suspension coil out of position. This condition could lead to a squeak noise during suspension movement. This bulletin outlines the procedures to inspect the driver\-side rear suspension coil position setting and, if necessary, adjust the coil to its correct position.
- [23\-DS\-004G\-1](/bulletins/10244957.md), 2023-11-06, Service bulletin: SUSPENSION. Certain GV70 \(JK1 and JK1A\), GV80 \(JX1\) and G80 \(RG3\) vehicles may have a noise condition from the rear differential at certain speeds while accelerating or decelerating. This bulletin describes the procedure to inspect the vehicle for noise and if necessary to tighten the lock nut or if necessary replace the differential.

JSON: [/v1/bulletins/10241898](/v1/bulletins/10241898)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%2023-DS-004G&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10241898&vehicle=Service%20bulletin%2023-DS-004G)