WenmarOpen by Wenmar Pro

Service bulletin TJ3641580

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10241649
Published by NHTSA2023-09-05
Manufacturer's numberTJ3641580
Manufacturer's date2023-06-20
NHTSA componentELECTRICAL SYSTEM; ELECTRICAL SYSTEM:PROPULSION SYSTEM:HYBRID MANAGEMENT

NHTSA's summary

Electrical rear axis drive

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Electrical system, Hybrid and electric drive

Vehicles listed
VOLVO S602020, 2021, 2022
VOLVO S902017, 2018, 2019, 2020, 2021
VOLVO V602020, 2021, 2022
VOLVO V60CC2019, 2020, 2021, 2022
VOLVO V902017, 2018, 2019, 2020, 2021
VOLVO XC402018
VOLVO XC402019, 2020, 2021, 2022
VOLVO XC602017, 2018, 2019, 2020, 2021
VOLVO XC702017

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
25V1790002025-03-24. ELECTRICAL SYSTEM:PROPULSION SYSTEM:TRACTION BATTERY; ELECTRICAL SYSTEM:SOFTWARE
20251472025-03-20. High Voltage
20222162022-04-28. Electrical
20213452021-06-02. Electrical
21V4140002021-06-02. ELECTRICAL SYSTEM:WIRING:FUSES AND CIRCUIT BREAKERS; FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP
21V1090002021-02-24. ELECTRICAL SYSTEM:PROPULSION SYSTEM:TRACTION BATTERY:MANAGEMENT SYSTEM/ENERGY CONTROL MODULE (BMS/BECM):SOFTWARE
18V8000002018-11-13. ELECTRICAL SYSTEM:SOFTWARE

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
37373.8.02026-08-18. Service bulletin. This is a Technical Journal: DIM Message and DTC BECM P0C7800. If the DIM displays a message stating "Drive System Service Required" and the DTC listed below is set, follow the advice under "Service". •Do not replace any parts. This is not hardware-related. •A new BECM software is released in version 3.6.4. or later. Perform a total upgrade according to TJ 31543 and release the car back to customer.
36863.4.02026-08-18. Service bulletin. This is a Technical Journal: DIM Message and DTC IEM P0C0500. 1. Erase the DTC 2. Test drive the vehicle in electrical mode and accelerate until the vehicle reaches a minimum of 30 km/h (19 mph). 3. Perform a new VIDA readout If the DTC IEM P0C0500 does not return, do not replace any parts. Release the car to customer.
37373.7.02026-06-08. Service bulletin. This is a Technical Journal: DIM Message and DTC BECM P0C7800.
 If the DIM displays a message stating "Drive System Service Required" and the DTC listed below is set, follow the advice under "Service".
 •Do not replace any parts. This is not hardware-related.
 •A new Battery Energy Control Module software is released in software version 5.1.9. Perform a Total Upgrade according to TJ 31543 and release the car back to the customer.
34295.9.02026-04-07. Service bulletin. This is a Technical Journal: Text plus 2 attachments 1 PDF and 1 PNG - High Voltage Battery repairs. Always repair the battery according to the methods in VIDA. This TJ is a guide to the kinds of repairs that can be done instead of a complete HV battery replacement.
 Parts, methods, and tools are now available to repair almost all faults within the High Voltage Battery.
37376.3.02026-04-07. Service bulletin. This is a Technical Journal: Propulsion Message with DTC BECM P0A9500 and/or P0E2F00. Check the following parameters below. Utilize the High-voltage system overview to make sure that the contactors are closed while performing this check.
367572026-02-05. Service bulletin. This is a Technical Journal: Text plus TJI 528994 - Charge Lid Hard to open/close. begin with replacing the actuator in the lock mechanism
TJ37373.6.0-2025-11-052025-12-22. Service bulletin. This is a Technical Journal: DIM Message and DTC BECM P0C7800. Structure Week 2023w47 and newer: New BECM software is released in version 3.6.4. Perform a Total Upgrade according to TJ 31543. • If the DTC sets after SW version 3.6.4 or newer has been installed, please follow VIDA fault tracing and then create a TIE Support Needed Vehicle Report. *Structure Week 2023w46 and older: New BECM software is planned for 2026, Q1. • Please follow VIDA fault tracing and then create a TIE Support Needed Vehicle Report
373762025-11-17. Service bulletin. This is a Technical Journal: Propulsion Message with DTC BECM P0A9500 and/or P0E2F00. Perform a "High-voltage system overview" read out. If the BECM "voltage after fuse" values (front and rear) are greater than the high voltage battery, the BECM needs to be replaced.
373732025-08-18. Service bulletin. This is a Technical Journal: DIM Message and DTC BECM P0C7800.
 Structure Week 2023w47 and newer: New BECM software is released in version 3.6.4. Perform a Total Upgrade according to TJ 31543.
 •If the DTC sets after SW version 3.6.4 or newer has been installed, please follow VIDA fault tracing and then create a TIE Support Needed Vehicle Report.
 *Structure Week 2023w46 and older: New BECM software is planned for 2026, Q1.
 •Please follow VIDA fault tracing and then create a TIE Support Needed Vehicle Report
369162025-08-18. Service bulletin. This is a Technical Journal: VCM Backup Battery Replacement with VCM-U105000. Replace the VCM Backup Battery and download the relevant Software.