Service bulletin 2101523
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10241114 |
| Published by NHTSA | 2023-08-21 |
| Manufacturer's number | 2101523 |
| Manufacturer's date | 2023-06-23 |
| NHTSA component | ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); POWER TRAIN |
NHTSA's summary
Flash: Transmission Control Module (TCM) Updates Customer may experience the following: ? Vehicle shifts excessively between gears 1 & 2 in Selec-Speed Control position. This bulletin involves reprogramming the TCM with the latest available software.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Electrical system, Transmission and driveline, Automatic transmission, Transmission control module
| JEEP GRAND CHEROKEE | 2022 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 26V413000 | 2026-06-30. POWER TRAIN:AUTOMATIC TRANSMISSION:GEAR POSITION INDICATION (PRNDL) |
|---|
A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.
| S2321000009 | 2024-01-16. Service bulletin. Malfunction Indicator Lamp (MIL) Illuminated. Active Diagnostic Trouble Code (DTC) P1DB7-00 ? Torque Converter Clutch Performance, Set. |
|---|---|
| 1801323 | 2024-01-08. Service bulletin. Flash: Powertrain Control Module (PCM) Updates Customers may experience one or more of the following: ? Engine must be started twice to achieve drive ready (at low temperatures around -30°C, -22°F) when the vehicle was entered and started quickly. ??Performance Limited, Service Fuel System? popup while driving. ? Unable to enter electric mode driving while Fuel Oil Refresh Mode (FORM) is active. This bulletin involves reprogramming the PCM with the latest available software NOTE: Additional module flashes are required for this update to be effective, the following modules are all to be updated along with this HCP and AHCP update: ? Transmission Control Module (TCM). ? Hybrid Control Processor (HCP) and Auxiliary Hybrid Control Processor (AHCP) also known as Power Inverter Module (PIM) module. |
| S2321000009 | 2024-01-08. Service bulletin. MIL On with TCM P1DB7 Active |
| S2321000005 | 2024-01-08. Service bulletin. Transmission Fluid Leak From Under The Vehicle. |
| S2321000009 | 2023-10-30. Service bulletin. MIL On with TCM P1DB7 Active |
| S2321000005 | 2023-10-30. Service bulletin. Transmission Fluid Leak From Under The Vehicle. |
| 1801323 | 2023-10-02. Service bulletin. Flash: Powertrain Control Module (PCM) Updates Customers may experience one or more of the following: ? **The engine oil life displayed on Instrument Panel Cluster (IPC) drops down too fast when the engine oil dilution reaches high level without the ability to recover. ? Incorrect reporting of fuel tank high pressure sensor value on wiTECH and Freeze Frame. ? The fuel door will get locked in the event of a leak failure.** ? Engine must be started twice to achieve drive ready (at low temperatures around -30°C, -22°F) when the vehicle was entered and started quickly. ? ?Performance Limited, Service Fuel System? popup while driving. ? Unable to enter electric mode driving while Fuel Oil Refresh Mode (FORM) is active. This bulletin involves reprogramming the PCM with the latest available software. NOTE: Additional module flashes are required for this update to be effective, the following modules are all to be updated along with this HCP and AHCP update: ? Transmission Control Module (TCM). ? Hybrid Control Processor (HCP) and Auxiliary Hybrid Control Processor (AHCP) also known as Power Inverter Module (PIM) module. |
| 2101623 | 2023-08-21. Service bulletin. Flash: Transmission Control Module (TCM) Updates Customer may experience the following: ? Vehicle shifts excessively between gears 1 & 2 in Selec-Speed Control position. This bulletin involves reprogramming the TCM with the latest available software. |
| S2225000003 | 2023-01-09. Service bulletin. P0513-Invalid Skim Key setting in the PCM after programming a replacement ?generic? PCM |
| 9100063 | 2022-11-07. Service bulletin. PCM If you are replacing a PCM in this vehicle, please review SOL S2225000003 for detailed programming instructions. Failure to follow instructions may result in an unresponsive PCM and cannot be recovered. |