WenmarOpen by Wenmar Pro

Service bulletin S2208000004

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10241014
Published by NHTSA2023-08-21
Manufacturer's numberS2208000004
Manufacturer's date2023-06-14
NHTSA componentSERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES; POWER TRAIN; STEERING

NHTSA's summary

Adjustable Pedals Cannot Be Adjusted, Power Tilt Steering Will Not Adjust

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Brakes, Steering, Transmission and driveline

Vehicles listed
JEEP GRAND WAGONEER2022, 2023
JEEP WAGONEER2022, 2023

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
26V4130002026-06-30. POWER TRAIN:AUTOMATIC TRANSMISSION:GEAR POSITION INDICATION (PRNDL)
24V1990002024-03-14. AIR BAGS:FRONTAL:DRIVER CLOCKSPRING/SPIRAL CASSETTE; STEERING:COLUMN

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
S2523000053 REV.C2026-08-13. Service bulletin. Service Electric Power Steering (EPS) Message On Instrument Cluster. Rev B.
18-069-262026-07-29. Service bulletin. Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **U0104-00 - Lost Communication With Cruise Control Module (NA Market Only) (In Active or Stored status). ● U0405-00 - Invalid Data Received From Cruise Control Module (NA Market Only) (In Active or Stored status). NOTE: Vehicles setting DTCs U0405-00 and U0104-00 may experience an inability to be cleared.** ● P0111-00 - Intake Air Temperature Sensor 1 Circuit Range Performance Bank 1 (In Active or Stored status). ● P0071-00 - Ambient Air Temperature Sensor Performance (In Active or Stored status). ● P0072-00 - Ambient Air Temperature Sensor Circuit "A" Low (In Active or Stored status). ● P0073-00 - Ambient Air Temperature Sensor Circuit "A" High (In Active or Stored status). ● P0011-00 - Bank 1 Camshaft 1 Position Timing Over Advanced Or (In Active or Stored status). ● P25E4-00 - B Camshaft Position - Unable To Achieve Locked Position Bank 1 (In Active or Stored status). ● U0673-00 - Lost Communication With Ion Sense Module (In Active or Stored status). ● P05BD-00 - Stop-Start Mode Switch Range/Performance (In Active or Stored status). ● P06DD-00 - Engine Oil Pressure Control Circuit Performance/stuck Off (In Active or Stored status). ● P0116-00 - Engine Coolant Temperature Sensor 1 Performance (In Active or Stored status). ● P00C6-00 - Fuel Rail Pressure Too Low - Engine Cranking (In Active or Stored status). ● P0325-00 - Knock/Combustion Vibration Sensor 1 Circuit (In Active or Stored status). ● P0330-00 - Knock/Combustion Vibration Sensor 2 Circuit (In Active or Stored status). ● P032A-00 - Knock - Combustion Vibration Sensor C Circuit (In Active or Stored status). ● P062B-00 - Internal Control Module Fuel Injector Control Performance (In Active or Stored status). This bulletin involves inspecting and possibly reprogramming the PCM with the latest available software.
S2523000053 REV.B2026-07-23. Service bulletin. Service Electric Power Steering (EPS) Message On Instrument Cluster. Rev B.
18-068-262026-07-23. Service bulletin. Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **U0405-00 - Invalid Data Received From Cruise Control Module. ● U0104-00 - Lost Communication With Cruise Control Module. NOTE: Vehicles setting DTCs U0405-00 and U0104-00 may experience an inability to be cleared.** ● P00C6-00 - Fuel Rail Pressure Too Low - Engine Cranking. ● P06DD-00 - Engine Oil Pressure Control Circuit Stuck Off. ● P0604-00 - Internal Control Module Random Access Memory Ram Error. ● P060C-00 - Internal Control Module Main Processor Performance. This bulletin involves reprogramming the PCM with the latest available software.
1131232026-07-08. Service bulletin. SPRING KIT - DISC BRAKE PAD
9100532 REV12026-05-20. Service bulletin. Before replacing the steering column control module (SCCM) due to wipers inop, wipers not turning off, wipers not returning to position, heated steering wheel not working and/or steering controls inop, Electronic Stability Control (ESC) light on, please follow these steps: 1.- Review if there is any active DTC. Refer to service library procedure and follow diagnosis steps. 2.- If failure still present, make sure all the switches', horn's, heated steering wheel, airbag's harness are properly connected and there is no corrosion or pinching, disconnect the switches & reconnect them, and reverify the issue. 3.- Verify if failure is still present, review if there is lack of communication between SCCM and BCM. For example, activate turn signals or wipers. 4.- Read at the BCM diagnosis session if BCM is receiving information from SCCM. Through diagnosis review if activation from horn, wipers or turn signal is requested and are working. 5.- Disconnect the SCCM fuse for around 30s,and repeat the previous steps to see if failure still present. 6.- Do a hard reset to BCM and evaluate if any DTC is set. Retest if failure still present. Review the active DTCs. 7.- Before replacing the SCCM disconnect it and reconnect it again. Note: Wipers position is not controlled by SCCM, verify motor wiper status if issue continues. If request from SCCM is sent to BCM, then verify if the communication to wipers is not working properly. If there are no DTC's active, physical defects, steering controls inop, wipers inop, heated steering wheel inop, then SCCM does not need to be replaced. Note: WL / WS SCCMs do not contain a Steering Angle Sensor (SAS) The Steering Angle is computed within the Electronic Power Steering (EPS) module. See Electronic Power Steering (EPS) module for diagnosis and repair procedures.
S2219000004 REV.A2026-03-25. Service bulletin. Service Electric Power Steering Message On Cluster. C0051-54 Steering Wheel Position Sensor Calibration, C0051-64 Steering Angle Set.
S2621000003 REV.A2026-03-18. Service bulletin. The vehicle will exhibit a service transmission/check engine warning indicator for the following transmission models: 845RE, 8HP45, 850RE, 8HP50, 8HP70, 8HP75, 8HP75-PHEV, 8HP75-LCV, 8HP90, 8HP95. Transmissions may exhibit the following diagnostic codes: P07E4, P1DB2, P0716, P1B14, P0733, P1D90, P1DB7, P1B13.
S26210000032026-03-05. Service bulletin. Service transmission/check engine warning indicator for the 850RE, 8HP50, 8HP70, 8HP75, 8HP75-PHEV transmissions that have fault codes P07E4, P1DB2, P0716, P1B14, P0733, P1D90, P1DB7, P1B13.
1104632026-03-05. Service bulletin. SWITCH - TRAILER BRAKE CONTROL MODULE , ADAPTER & WIRING KIT - TRAILER TOW.