# Service bulletin FDM\-TSIB\-043

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10240400
- Published by NHTSA: 2023\-08\-03
- Manufacturer's number: FDM\-TSIB\-043
- Manufacturer's date: 2023\-07\-24
- NHTSA component: EQUIPMENT

## NHTSA's summary

This bulletin provides information on updating hydraulic hose clamping below the cab to match current production. Engineering recommends changing out the front STAUFF clamp using the following procedure. The second STAUFF clamp can be changed out using this procedure if desired.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2023/MC-10240400-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2023/MC-10240400-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Equipment and accessories

## Vehicles listed

- 1999 to 2001 OSHKOSH S
- OSHKOSH S SERIES
- 1978 to 1994 OSHKOSH S SERIES
- 1995 OSHKOSH S SERIES
- 1997 to 2000 OSHKOSH S SERIES
- 2005 to 2012 OSHKOSH S\-SERIES
- 2013 to 2022 OSHKOSH S\-SERIES
- 1992 to 1993 OSHKOSH SB30FD
- 1991 to 1993 OSHKOSH SB30FD\-D
- 2008 OSHKOSH STA\-SERIES
- 1990 to 1994 OSHKOSH SUPER\-SLIDER

## Other bulletins for the same vehicles and component

- [FDM\_TSIB\-047](/bulletins/10246254.md), 2023-12-05, Service bulletin: EQUIPMENT. This bulletin provides instructions for installing rubber hose STAUFF clamps in areas of the vehicle that have hard line STAUFF clamps installed on rubber hoses. Rubber hose STAUFF clamps have a smooth inner contact surface and filleted edges. Installing rubber hose STAUFF clamps will reduce potential hose chaffing in areas where hard line clamps were installed
- [FDM\-TSIB\-025](/bulletins/10198991.md), 2021-07-07, Service bulletin: EQUIPMENT. This bulletin provides instructions for bolting the water tank mounting feet to the water tank if the bonded feet become loose.
- [FDM\-SVC\-002](/bulletins/10198990.md), 2021-07-07, Service bulletin: EQUIPMENT. This bulletin provides instruction for replacing the water pump impeller due to corrosion. Oshkosh has received reports of non\-working water pumps due to the pump impeller becoming corroded and seized, causing the pump not to spin. A new impeller made of an improved alloy was developed to eliminate corrosion issues.

JSON: [/v1/bulletins/10240400](/v1/bulletins/10240400)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20FDM-TSIB-043&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10240400&vehicle=Service%20bulletin%20FDM-TSIB-043)