Service bulletin 1805923
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10239943 |
| Published by NHTSA | 2023-07-31 |
| Manufacturer's number | 1805923 |
| Manufacturer's date | 2023-05-13 |
| NHTSA component | ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM) |
NHTSA's summary
Flash: Powertrain Control Module (PCM) Updates Customers may experience the following: ? Poor or reduced air conditioning performance during wide open throttle or heavy acceleration. This bulletin involves reprogramming the PCM with the latest available software.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Electrical system, Transmission and driveline, Automatic transmission, Transmission control module
| JEEP WAGONEER | 2023 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 26V413000 | 2026-06-30. POWER TRAIN:AUTOMATIC TRANSMISSION:GEAR POSITION INDICATION (PRNDL) |
|---|
A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.
| 1800324 | 2024-03-18. Service bulletin. Flash: Powertrain Control Module (PCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) have been set: ? **P00C6 - Fuel Rail Pressure Too Low - Engine Cranking Bank 1. ? P06DD - Engine Oil Pressure Control Circuit Performance/Stuck Off. ? P0461 - Fuel Level Sensor "A" Circuit Range/Performance.** ? P2C90-00 - Crankcase Ventilation System - Hose "A" Disconnected. ? P0604-00 - Internal Control Module Random Access Memory Ram Error. ? P060C-00 - Internal Control Module Main Processor Performance. This bulletin involves reprogramming the PCM with the latest available software. |
|---|---|
| S2325000008 | 2024-01-16. Service bulletin. Mil-On/Check Engine Lamp-On with ANY DTCs. Freeze frame data from the powertrain control module (PCM). |
| S2321000008 | 2024-01-08. Service bulletin. Malfunction Indicator Lamp (MIL) Illumination, Diagnostic Trouble Codes (DTCs) P0731 ? Gear 1 Shift Incorrect Ratio, And/Or P07D9 ? Gear Shift Incorrect Ratio, Set. |
| 1810423 | 2023-12-18. Service bulletin. Flash: Powertrain Control Module (PCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) have been set: ? P2C90-00 - Crankcase Ventilation System - Hose "A" Disconnected. ? P0604-00 - Internal Control Module Random Access Memory Ram Error. ? P060C-00 - Internal Control Module Main Processor Performance. This bulletin involves reprogramming the PCM with the latest available software. |
| 1804023 | 2023-07-31. Service bulletin. Flash: Powertrain Control Module (PCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following DTCs have been set: ? **P0300-00 - Multiple Cylinder Misfire. ? P0301-00 - Cylinder 1 Misfire Detected. ? P0302-00 - Cylinder 2 Misfire. ? P0303-00 - Cylinder 3 Misfire ? P0304-00 - Cylinder 4 Misfire. ? P0305-00 - Cylinder 5 Misfire. ? P0306-00 - Cylinder 6 Misfire.** ? P05CC-00 - Cold Start A Camshaft Position Timing Performance Bank 1. Customer may also experience the following: ? Poor or insufficient A/C performance during towing or other high torque maneuvers. ? Belt chirp is heard at startup or when A/C cycles on. This bulletin involves reprogramming the PCM with the latest available software. |
| 1804023 | 2023-05-30. Service bulletin. Flash: Powertrain Control Module (PCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Code (DTC) has been set: ? P05CC-00 - Cold Start A Camshaft Position Timing Performance Bank 1. Customer may also experience the following: ? Poor or insufficient A/C performance during towing or other high torque maneuvers. ? Belt chirp is heard at startup or when A/C cycles on. This bulletin involves reprogramming the PCM with the latest available software. |