Service bulletin PIT5697C
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10239171 |
| Published by NHTSA | 2023-07-17 |
| Manufacturer's number | PIT5697C |
| Manufacturer's date | 2023-06-20 |
| NHTSA component | BACK OVER PREVENTION: CAMERA SYSTEM |
NHTSA's summary
This Preliminary information communication provides information to the technician on installing Regular Production Option Code UVC Rearview Camera. Technician will need to reference the latest version of General Motors Up-fitter Integration Bulletin 152. The information can be found at http://www.gmupfitter.com/ under the "Technical Bulletin" Tab and then "Show all bulletins."
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Driver assistance, Backup camera
| CHEVROLET SILVERADO 1500 | 2019, 2020, 2021, 2022, 2023 (the catalog's model; the bulletin names a series or trim of it) |
|---|---|
| CHEVROLET SILVERADO 2500 | 2020, 2021, 2022, 2023, 2024 (the catalog's model; the bulletin names a series or trim of it) |
| GMC SIERRA 1500 | 2019, 2020, 2021, 2022, 2023 (the catalog's model; the bulletin names a series or trim of it) |
| GMC SIERRA 2500 | 2020, 2021, 2022, 2023, 2024 (the catalog's model; the bulletin names a series or trim of it) |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 22-NA-068 | 2025-02-28. Service bulletin. This technical bulletin provides repair information to correct a customer concern of Diagnostic Tips For Park Assist Off Message / Unwanted Or False Park Assist Alerts / No DTCs. |
|---|---|
| PIT5907D | 2024-12-16. Service bulletin. This Preliminary information communicates a issue where the park assist module can set current communication dtc's due to a timing issue and it may have nothing related to the customers complaint. A software update will be available to repair these false DTC's |
| PIT5697D | 2024-12-09. Service bulletin. This Preliminary information communication provides information to the technician on installing Regular Production Option Code UVC Rearview Camera. Technician will need to reference the latest version of General Motors Up-fitter Integration Bulletin 152. The information can be found at http://www.gmupfitter.com/ under the "Technical Bulletin" Tab and then "Show all bulletins." |
| PIT6289 | 2024-12-04. Service bulletin. This Preliminary information communicates information that Engineering is aware of a concern where the collision / detection alert changes from audible beep to haptic feedback on its own and are working on a repair. |
| PIT6161 | 2024-05-10. Service bulletin. This Preliminary information communicates an issue with the side object detection module shown unavailable due to a sticker wrongly placed on the module. Dealers are to remove the sticker. |
| PIT6105B | 2024-04-15. Service bulletin. This Preliminary information communicates to dealership technicians that they will need to perform this step prior to performing any programming on replacement radios. |
| PIT6123B | 2024-04-15. Service bulletin. This Preliminary information communicates on a software anomaly that causes a Rear Auto Brake and Park Assist Unavailable message on start up that is temporary and how to address that concern. |
| 23-NA-169 | 2024-03-06. Service bulletin. This service bulletin provides repair information to correct a customer concern of the rearview driver information camera intermittent in low light conditions - replace camera. |
| PIT5386J | 2024-01-29. Service bulletin. This Preliminary Information communication provides information to the technician about vehicles that are found to have a back-up alarm inoperative during the Pre-Delivery Inspection. On trucks equipped with the Back Up Alarm (RPO 8S3), the alarm will be intentionally left disconnected from the assembly plant. Technician will reroute the harness and plug it in. |
| PIP5847B | 2023-12-18. Service bulletin. This Preliminary information communicates the possibility of a misfire or rough running concern and abnormal engine noise due to excessive wear in exhaust roller follower axle pin. |