# Service bulletin 1516713R

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10234925
- Published by NHTSA: 2023\-04\-24
- Manufacturer's number: 1516713R
- Manufacturer's date: 2013\-09\-13
- NHTSA component: VISIBILITY:REARVIEW MIRRORS/DEVICES:INTERIOR

## NHTSA's summary

Loose Windshield\-Mounted Rear\-View Mirror

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2013/MC-10234925-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2013/MC-10234925-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Glass, wipers and mirrors, Mirrors

## Vehicles listed

- 2013 SUBARU BRZ
- 2008 to 2013 SUBARU IMPREZA
- 2008 to 2013 SUBARU WRX
- 2008 to 2013 SUBARU WRX STI

## Other bulletins for the same vehicles and component

- [1216814](/bulletins/10233448.md), 2023-04-03, Service bulletin: VISIBILITY:REARVIEW MIRRORS/DEVICES:INTERIOR; BACK OVER PREVENTION. Appearance Imperfection of Inside Rear View mirror
- [12\-195\-15](/bulletins/10094342.md), 2017-03-08, Service bulletin: STRUCTURE:BODY:DOOR; VISIBILITY:REARVIEW MIRRORS/DEVICES:EXTERIOR. SHOULD YOU RECEIVE A CUSTOMER CONCERN OF VIBRATION OR LOOSENESS IN EITHER OF THE DOOR MIRRORS, A DESIGN CHANGE HAS BEEN MADE TO THE 3 MIRROR HEAD MOUNTING HOLES IN THE MOUNTING BASE. IN ADDITION, A NEW RETAINING BOLT AND TIGHTENING TORQUE SPECIFICATION ARE NOW USED TO SECURE THE MIRROR HEAD TO THE MOUNTING BASE. THIS BULLETIN PROVIDES A PROCEDURE FOR REPAIRING THE EXISTING MIRROR ASSEMBLY BY REPLACING THE THREE MOUNTING SCREWS WITH UPDATED FASTENERS. NOTE: REFER TO TSB 12\-152\-13 DATED 6/17/2013 FOR RELATED INFORMATION ON BRZ MODELS.
- [12\-152\-13](/bulletins/10090290.md), 2017-02-03, Service bulletin: VISIBILITY:REARVIEW MIRRORS/DEVICES:EXTERIOR; VISIBILITY:REARVIEW MIRRORS/DEVICES. "SHOULD YOU RECEIVE A CUSTOMER CONCERN OF LOOSENESS OR VIBRATION IN EITHER OF THE DOOR MIRRORS, A DESIGN CHANGE HAS BEEN MADE TO THE 3 MIRROR HEAD MOUNTING HOLES IN THE MOUNTING BASE. IN ADDITION, A NEW RETAINING BOLT AND TIGHTENING TORQUE SPECIFICATION ARE NOW USED TO SECURE THE MIRROR HEAD TO THE MOUNTING BASE. THIS BULLETIN ADDRESSES HOW TO REPAIR THE EXISTING MIRROR ASSEMBLY ON THE CAR BY REPLACEMENT OF THE THREE MOUNTING SCREWS WITH REVISED FASTENERS AND INSTRUCTIONS. "
- [12\-168\-14](/bulletins/10090286.md), 2017-02-03, Service bulletin: VISIBILITY:REARVIEW MIRRORS/DEVICES. APPEARANCE IMPERFECTION OF INSIDE REAR VIEW MIRROR \- THIS BULLETIN INFORMS OF HOW TO REPAIR A POSSIBLE VISUAL IMPERFECTION IN THE FRAMELESS REAR\-VIEW MIRROR.
- [12\-168\-14](/bulletins/10067887.md), 2016-05-23, Service bulletin: VISIBILITY:REARVIEW MIRRORS/DEVICES. APPEARANCE IMPERFECTION OF INSIDE REAR VIEW MIRROR \- THIS BULLETIN INFORMS OF HOW TO REPAIR A POSSIBLE VISUAL IMPERFECTION IN THE FRAMELESS REAR\-VIEW MIRROR.
- [12\-152\-13](/bulletins/10065785.md), 2016-05-19, Service bulletin: VISIBILITY:REARVIEW MIRRORS/DEVICES:EXTERIOR. "SHOULD YOU RECEIVE A CUSTOMER CONCERN OF LOOSENESS OR VIBRATION IN EITHER OF THE DOOR MIRRORS, A DESIGN CHANGE HAS BEEN MADE TO THE 3 MIRROR HEAD MOUNTING HOLES IN THE MOUNTING BASE. IN ADDITION, A NEW RETAINING BOLT AND TIGHTENING TORQUE SPECIFICATION ARE NOW USED TO SECURE THE MIRROR HEAD TO THE MOUNTING BASE. THIS BULLETIN ADDRESSES HOW TO REPAIR THE EXISTING MIRROR ASSEMBLY ON THE CAR BY REPLACEMENT OF THE THREE MOUNTING SCREWS WITH REVISED FASTENERS AND INSTRUCTIONS. "

JSON: [/v1/bulletins/10234925](/v1/bulletins/10234925)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%201516713R&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10234925&vehicle=Service%20bulletin%201516713R)