# Service bulletin 0200223

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10234455
- Published by NHTSA: 2023\-04\-17
- Manufacturer's number: 0200223
- Manufacturer's date: 2023\-02\-01
- NHTSA component: BACK OVER PREVENTION; POWER TRAIN; WHEELS; STEERING; SUSPENSION

## NHTSA's summary

Loud Noise from Front Wheel Area The technician of customer may notice one or more of the following: ? A loud noise from the front wheel area \(worse on turns\). ? A humming or clunk noise, brake pulsation, or vibration in the steering wheel. This bulletin involves tightening both front wheel bearing to knuckle joint bolts to spec.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2023/MC-10234455-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2023/MC-10234455-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Driver assistance, Steering, Suspension, Transmission and driveline, Wheels, Backup camera

## Vehicles listed

- 2022 DODGE DURANGO

## Recalls for the same vehicles and component

- [24V436000](/recalls/nhtsa/24V436000.md), 2024-06-13: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

## Other bulletins for the same vehicles and component

- [103289](/bulletins/11014887.md), 2025-03-04, Service bulletin: BACK OVER PREVENTION: WARNINGS; LANE DEPARTURE: BLIND SPOT DETECTION. CAMERA \- REAR VIEW
- [S2208000045 REV.B](/bulletins/11011774.md), 2024-12-11, Service bulletin: BACK OVER PREVENTION: REARVIEW SYSTEM BRAKING. Backup Camera Poor Image Quality Inspection
- [0200223](/bulletins/10247982.md), 2024-01-02, Service bulletin: WHEELS:LUGS/NUTS/BOLTS/STUDS; POWER TRAIN; WHEELS; BACK OVER PREVENTION; STEERING:LINKAGES:KNUCKLE:SPINDLE:ARM; SUSPENSION; STEERING. Loud Noise from Front Wheel Area The technician of customer may notice one or more of the following: ? A loud noise from the front wheel area \(worse on turns\). ? A humming or clunk noise, brake pulsation, or vibration in the steering wheel. This bulletin involves tightening both front wheel bearing to knuckle joint bolts to spec.
- [S2108000015](/bulletins/10247955.md), 2024-01-02, Service bulletin: BACK OVER PREVENTION. Uconnect Box Require Service Message
- [9003357](/bulletins/10247905.md), 2024-01-02, Service bulletin: BACK OVER PREVENTION. ADAPTER, Engine Oil Filter \(Pentastar V6\) For all 2014MY replace the Oil Filter Adapter \(OFA\). For any other MY \(with mileage above 30,000\) review and follow instructions from STAR Online S1809000007 REV. C available on Dealer Connect. Also, consider the following: 1\) Remove OFA 2\) Replace only the oil inlet O\-ring and gaskets \(seals kit in SOL above\). 3\) Re\-install the OFA. For 2023MY and beyond use black O\-ring. For 2022MY and prior use red O\-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
- [9100132](/bulletins/10247902.md), 2024-01-02, Service bulletin: BACK OVER PREVENTION. ENGINE ASSY \- 3.6L AUTO TRANS Before replacing the engine due to an abnormal ticking noise, please check that the INTAKE Hydraulic Lash Adjusters are not "collapsed". If a collapsed INTAKE HLA is found, replace all INTAKE HLAs on the suspect cylinder head. The noise can occur at low or high RPMs, and at low or high temperatures. There are no Diagnostic Trouble Codes \(DTC\)s present. CAUSE: INTAKE Hydraulic Lash Adjuster may have a manufacturing issue that can cause the plunger to stick, generating valvetrain noise.
- [0901923](/bulletins/10247472.md), 2023-12-18, Service bulletin: BACK OVER PREVENTION. Cold Engine Ticking Noise From Exhaust Manifold Area The customer may describe an ticking noise from the exhaust manifold location\(s\) when cold. This bulletin involves replacing the exhaust manifolds.
- [S238A000049](/bulletins/10247444.md), 2023-12-18, Service bulletin: BACK OVER PREVENTION. SXM Lockup \(rearview camera function is not affected\), Cannot Change Channel or Adjust Volume
- [S238A000047](/bulletins/10247435.md), 2023-12-18, Service bulletin: BACK OVER PREVENTION. Humming Noise Through Speakers While Vehicle Is Off

JSON: [/v1/bulletins/10234455](/v1/bulletins/10234455)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%200200223&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10234455&vehicle=Service%20bulletin%200200223)