WenmarOpen by Wenmar Pro

Service bulletin 23-FL-002H

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10233552
Published by NHTSA2023-04-04
Manufacturer's number23-FL-002H
Manufacturer's date2023-03-23
NHTSA componentENGINE AND ENGINE COOLING

NHTSA's summary

This bulletin provides the diagnostic procedure for the GDI injector(s) in certain 21-23MY Sonata, 21-22MY Santa Fe, certain 22MY Santa Cruz, and certain MY21-23 Tucson equipped with 2.5L GDI engines with one or more misfire DTC(s) due to internally leaking GDI injector(s).

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Engine

Vehicles listed
HYUNDAI SANTA CRUZ2022
HYUNDAI SANTA FE2021, 2022
HYUNDAI SONATA2021, 2022, 2023
HYUNDAI TUCSON2021, 2022, 2023

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
20222442022-05-08. Engine
22V1970002022-03-28. ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION:PIPES, HOSES, AND FITTINGS; ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO/SUPERCHARGER

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
26-01-081H DCS2026-10-14. Service campaign. Certain Santa Fe Hybrid (TM HEV), Santa Fe Plug-in Hybrid (TM PHEV), Tucson Hybrid (NX4 HEV), andTucson Plug-in Hybrid (NX4 PHEV) vehicles may experience intake air line freezing and Exhaust GasRecirculation (EGR) valve corrosion due to excessive condensation accumulating within the EGR system.This condition can lead to drivability concerns related to the following DTCs: - P040400: (Exhaust Gas Recirculation Control Circuit Range) - P049D00: (EGR 'A' Control Position Exceeded Learning Limit) - P047100: (Exhaust Pressure Sensor 'A' Circuit Range/Performance) - P012800: Coolant Thermostat (Coolant Temperature below Thermostat Regulation Temperature) - P262B00: (Control Module Power Off Timer Performance) - P050C00: Cold Start Engine Coolant Temperature Performance - P1DFD00: (EVAP System Purge Pump Target Speed) - P2DFD00: (EVAP System Purge Pump Performance) - P112000: (Inlet Metering Valve – Malfunction) - P033500: (Crankshaft Position Sensor A)
26-EM-016H TSB2026-10-14. Service bulletin. Some vehicles equipped with internal combustion engines may exhibit higher-than-expected engine oil consumption. This bulletin outlines the combustion chamber cleaning procedure for vehicles diagnosed with this condition. All internal combustion engines consume some engine oil during normal operation, depending on driving conditions and mileage, and this procedure should only be performed when deemed necessary based on inspection and diagnosis of the vehicle as outlined in TSB 26-EM-015H, Engine Oil Consumption – Inspection & Repair Guidelines, or the latest revision.
26-EM-015H TSB2026-10-13. Service bulletin. Certain vehicles equipped with internal combustion engines may exhibit higher-than-expected engine oil consumption. This bulletin provides the inspection and repair procedures for vehicles exhibiting this condition. All internal combustion engines consume engine oil as part of normal engine operation. Oil consumption rates may vary based on mileage, operating conditions, driving habits, and maintenance history. Hyundai recommends following the prescribed maintenance schedule and periodically checking the engine oil level using the dipstick to maintain proper engine oil level.
26-01-081H TSB2026-10-09. Service campaign. Certain Santa Fe Hybrid (TM HEV), Santa Fe Plug-in Hybrid (TM PHEV), Tucson Hybrid (NX4 HEV), and Tucson Plug-in Hybrid (NX4 PHEV) vehicles may experience intake air line freezing and Exhaust Gas Recirculation (EGR) valve corrosion due to excessive condensation accumulating within the EGR system. This condition can lead to drivability concerns related to the following DTCs: • P040400: (Exhaust Gas Recirculation Control Circuit Range) • P049D00: (EGR 'A' Control Position Exceeded Learning Limit) • P047100: (Exhaust Pressure Sensor 'A' Circuit Range/Performance) • P012800: Coolant Thermostat (Coolant Temperature below Thermostat Regulation Temperature) • P262B00: (Control Module Power Off Timer Performance) • P050C00: Cold Start Engine Coolant Temperature Performance • P1DFD00: (EVAP System Purge Pump Target Speed) • P2DFD00: (EVAP System Purge Pump Performance) • P112000: (Inlet Metering Valve – Malfunction) • P033500: (Crankshaft Position Sensor A) The bulletin below provides instructions to perform a software update for the Engine Control Module (ECM).
26-01-081H DN2026-10-09. Service campaign. Certain Santa Fe Hybrid (TM HEV), Santa Fe Plug-in Hybrid (TM PHEV), Tucson Hybrid (NX4 HEV), and Tucson Plug-in Hybrid (NX4 PHEV) vehicles may experience intake air line freezing and Exhaust Gas Recirculation (EGR) valve corrosion due to excessive condensation accumulating within the EGR system. This condition can lead to drivability concerns related to the following DTCs: • P040400: (Exhaust Gas Recirculation Control Circuit Range) • P049D00: (EGR 'A' Control Position Exceeded Learning Limit) • P047100: (Exhaust Pressure Sensor 'A' Circuit Range/Performance) • P012800: Coolant Thermostat (Coolant Temperature below Thermostat Regulation Temperature) • P262B00: (Control Module Power Off Timer Performance) • P050C00: Cold Start Engine Coolant Temperature Performance • P1DFD00: (EVAP System Purge Pump Target Speed) • P2DFD00: (EVAP System Purge Pump Performance) • P112000: (Inlet Metering Valve – Malfunction) • P033500: (Crankshaft Position Sensor A)
26-EM-014H TSB2026-09-22. Service bulletin. Some Tucson (TL) vehicles equipped with a 2.0L engine may exhibit a continued DTC P132600 after an ECM logic update has been performed per TSB 24-01-068H, Engine Monitoring Logic (Service Campaign 966). This bulletin provides instructions to inspect and resolve other engine mechanical issues and if DTC P132600 remains, then a procedure and manual mode passwords are given to perform the update again in manual mode to resolve this condition.
9C2 0605182026-06-06. Service campaign. Following completion of Service Campaign 9C2 (Theta II Emissions Improvement), certain vehicles may exhibit a brief hesitation or rough shifting condition during cold start operation. If present, this condition is expected to occur only within approximately the first 1-3 minutes after engine start, while the catalyst is reaching its normal operating temperature.
9C2 DCS 2605182026-06-06. Service campaign. Following completion of Service Campaign 9C2 (Theta II Emissions Improvement), certain vehicles may exhibit a brief hesitation or rough shifting condition during cold start operation. If present, this condition is expected to occur only within approximately the first 1-3 minutes after engine start, while the catalyst is reaching its normal operating temperature.
26-01-013H-2 DN2026-06-06. Service campaign. Certain Santa Fe (TMA), Santa Fe Sport (AN), Sonata (LFA), and Tucson (TL) vehicles equipped with Theta II engines may exhibit elevated engine-out emissions. The California Air Resources Board has determined that these vehicles may be releasing air pollutants which exceed Federal and California standards.
26-01-013H-2 TSB2026-06-06. Service campaign. Certain Santa Fe (TMA), Santa Fe Sport (AN), Sonata (LFA), and Tucson (TL) vehicles equipped with Theta II engines may exhibit elevated engine-out emissions. This bulletin provides instructions for updating the Engine Control Module (ECM) to address this condition.