# Service bulletin 1216814

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10233448
- Published by NHTSA: 2023\-04\-03
- Manufacturer's number: 1216814
- Manufacturer's date: 2014\-03\-31
- NHTSA component: VISIBILITY:REARVIEW MIRRORS/DEVICES:INTERIOR; BACK OVER PREVENTION

## NHTSA's summary

Appearance Imperfection of Inside Rear View mirror

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2014/MC-10233448-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2014/MC-10233448-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Driver assistance, Glass, wipers and mirrors, Backup camera, Mirrors

## Vehicles listed

- 2013 SUBARU BRZ

## Other bulletins for the same vehicles and component

- [1516713R](/bulletins/10234925.md), 2023-04-24, Service bulletin: VISIBILITY:REARVIEW MIRRORS/DEVICES:INTERIOR. Loose Windshield\-Mounted Rear\-View Mirror
- [1515712R](/bulletins/10232500.md), 2023-03-06, Service bulletin: EQUIPMENT:APPLIANCE:TV/RADIO/SPEAKERS; BACK OVER PREVENTION. 2013 Exchange Component Identification and Procedures
- [12\-152\-13](/bulletins/10090290.md), 2017-02-03, Service bulletin: VISIBILITY:REARVIEW MIRRORS/DEVICES:EXTERIOR; VISIBILITY:REARVIEW MIRRORS/DEVICES. "SHOULD YOU RECEIVE A CUSTOMER CONCERN OF LOOSENESS OR VIBRATION IN EITHER OF THE DOOR MIRRORS, A DESIGN CHANGE HAS BEEN MADE TO THE 3 MIRROR HEAD MOUNTING HOLES IN THE MOUNTING BASE. IN ADDITION, A NEW RETAINING BOLT AND TIGHTENING TORQUE SPECIFICATION ARE NOW USED TO SECURE THE MIRROR HEAD TO THE MOUNTING BASE. THIS BULLETIN ADDRESSES HOW TO REPAIR THE EXISTING MIRROR ASSEMBLY ON THE CAR BY REPLACEMENT OF THE THREE MOUNTING SCREWS WITH REVISED FASTENERS AND INSTRUCTIONS. "
- [12\-168\-14](/bulletins/10090286.md), 2017-02-03, Service bulletin: VISIBILITY:REARVIEW MIRRORS/DEVICES. APPEARANCE IMPERFECTION OF INSIDE REAR VIEW MIRROR \- THIS BULLETIN INFORMS OF HOW TO REPAIR A POSSIBLE VISUAL IMPERFECTION IN THE FRAMELESS REAR\-VIEW MIRROR.
- [12\-168\-14](/bulletins/10067887.md), 2016-05-23, Service bulletin: VISIBILITY:REARVIEW MIRRORS/DEVICES. APPEARANCE IMPERFECTION OF INSIDE REAR VIEW MIRROR \- THIS BULLETIN INFORMS OF HOW TO REPAIR A POSSIBLE VISUAL IMPERFECTION IN THE FRAMELESS REAR\-VIEW MIRROR.
- [12\-152\-13](/bulletins/10065785.md), 2016-05-19, Service bulletin: VISIBILITY:REARVIEW MIRRORS/DEVICES:EXTERIOR. "SHOULD YOU RECEIVE A CUSTOMER CONCERN OF LOOSENESS OR VIBRATION IN EITHER OF THE DOOR MIRRORS, A DESIGN CHANGE HAS BEEN MADE TO THE 3 MIRROR HEAD MOUNTING HOLES IN THE MOUNTING BASE. IN ADDITION, A NEW RETAINING BOLT AND TIGHTENING TORQUE SPECIFICATION ARE NOW USED TO SECURE THE MIRROR HEAD TO THE MOUNTING BASE. THIS BULLETIN ADDRESSES HOW TO REPAIR THE EXISTING MIRROR ASSEMBLY ON THE CAR BY REPLACEMENT OF THE THREE MOUNTING SCREWS WITH REVISED FASTENERS AND INSTRUCTIONS. "

JSON: [/v1/bulletins/10233448](/v1/bulletins/10233448)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%201216814&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10233448&vehicle=Service%20bulletin%201216814)