# Service bulletin B23\-008

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10232253
- Published by NHTSA: 2023\-03\-02
- Manufacturer's number: B23\-008
- Manufacturer's date: 2023\-02\-23
- NHTSA component: FORWARD COLLISION AVOIDANCE; VEHICLE SPEED CONTROL; LANE DEPARTURE

## NHTSA's summary

Service Bulletin \- Due to a problem with the detection logic in the multipurpose camera software, the vehicle's LKAS, ACC, or CMBS indicator lights may come on incorrectly.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2023/MC-10232253-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2023/MC-10232253-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Driver assistance, Throttle and cruise control

## Vehicles listed

- 2017 to 2018 ACURA MDX
- 2017 to 2018 ACURA MDX SPORT HYBRID

## Other bulletins for the same vehicles and component

- [B19050B](/bulletins/10160873.md), 2019-06-06, Service bulletin: ELECTRONIC STABILITY CONTROL \(ESC\). ServiceNews Article \- When removing and installing a cable reel, you need to keep both the cable reel and the steering angle sensor in position. If you don't, the VSA indicator may come on along with one or more VSA DTCs. And when you run the Neutral Memorization Procedure in the i\-HDS, it won't complete.
- [B17120D](/bulletins/10150422.md), 2018-12-04, Service bulletin: BACK OVER PREVENTION; ELECTRICAL SYSTEM. Servicenews Article \- If any of the accessory rear parking sensors look crooked or have recessed into the bumper, make sure the two clips on the rear bumper harness were removed as called out in the installation instructions. If they weren't, they can cause too much tension on the sensors with the harness installed, resulting in this issue.

JSON: [/v1/bulletins/10232253](/v1/bulletins/10232253)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20B23-008&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10232253&vehicle=Service%20bulletin%20B23-008)