# Service bulletin 0900114

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10229873
- Published by NHTSA: 2023\-01\-17
- Manufacturer's number: 0900114
- Manufacturer's date: 2014\-04\-22
- NHTSA component: BACK OVER PREVENTION

## NHTSA's summary

Hard Contact Knocking Noise In Engine Compartment Primarily While Turning Left

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2014/MC-10229873-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2014/MC-10229873-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Driver assistance, Backup camera

## Vehicles listed

- 2011 to 2014 DODGE JOURNEY

## Other bulletins for the same vehicles and component

- [9003357](/bulletins/10247905.md), 2024-01-02, Service bulletin: BACK OVER PREVENTION. ADAPTER, Engine Oil Filter \(Pentastar V6\) For all 2014MY replace the Oil Filter Adapter \(OFA\). For any other MY \(with mileage above 30,000\) review and follow instructions from STAR Online S1809000007 REV. C available on Dealer Connect. Also, consider the following: 1\) Remove OFA 2\) Replace only the oil inlet O\-ring and gaskets \(seals kit in SOL above\). 3\) Re\-install the OFA. For 2023MY and beyond use black O\-ring. For 2022MY and prior use red O\-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
- [24\-005\-17](/bulletins/10217488.md), 2022-08-08, Service bulletin: VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM:COMPRESSOR:MODULE \(ACCM\); ELECTRICAL SYSTEM:SOFTWARE; ELECTRICAL SYSTEM; PARKING BRAKE; EQUIPMENT; BACK OVER PREVENTION. Flash: HVAC Diagnostic and System Improvements This bulletin involves reprogramming the Heating Ventilation Air Conditioning \(HVAC\) Module with the latest available software. Some customers may notice one of the following:The Defrost button has to be pressed twice to activate the system. The Automatic Temperature Control \(ATC\)/ Manual Temperature Control \(MTC\) controller may lose its configuration. This condition can happen when the battery is disconnected or becomes low. This condition could also happen if CAN bus communication was lost. The software was changed to monitor the configuration every two secondsand updated it if the last data saved in memory is different from what is being received on the CAN bus to correct this issue \(2011 Only\).
- [18\-008\-13](/bulletins/10216404.md), 2022-07-25, Service bulletin: POWER TRAIN; ELECTRICAL SYSTEM; SERVICE BRAKES; BACK OVER PREVENTION. Flash: MIL Illumination P0108 \- Manifold Absolute Pressure Sensor Circuit High And Transmission Shift Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module \(PCM\) with new software. The customer may experience any of the following: 3.6L engine. MIL Illumination for P0108 \- Manifold Absolute Pressure Sensor Circuit High affects only 2012 model year vehicles equipped with a 3.6L engine \(sales code ERB\). 2.4L \& 3.6L engines 2.4L \& 3.6L engines 2.4L \& 3.6L engines 3.6L engine 3.6L engine 3.6L engine 2.4L \& 3.6L engines 2.4L engine 2.4L engine 2.4L engine Improves the consistency of how shifts are controlled during upshifts ?torque management?. 3.6L engineUpdating the software will correct the conditions listed above.
- [18\-033\-12](/bulletins/10216344.md), 2022-07-25, Service bulletin: BACK OVER PREVENTION; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE:SOFTWARE; ELECTRICAL SYSTEM; EXTERIOR LIGHTING; SERVICE BRAKES, HYDRAULIC. Flash: MIL Illumination P0108 \- Manifold Absolute Pressure Sensor Circuit High This bulletin involves selectively erasing and reprogramming the Powertrain Control Module \(PCM\) with new software. The customer may indicate that their Malfunction Indicator Lamp \(MIL\) is illuminated. Upon further investigation the Technician may find that P0108 \- Manifold Absolute Pressure Sensor Circuit High has been set active or stored.Updating the software will correct the condition listed above.
- [18\-024\-12 REV. A](/bulletins/10216331.md), 2022-07-25, Service bulletin: SERVICE BRAKES, HYDRAULIC; BACK OVER PREVENTION; ELECTRICAL SYSTEM; POWER TRAIN; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE \(TCM/PCM/TECM\). Flash: MIL Illumination P0108 \- Manifold Absolute Pressure Sensor Circuit High And Transmission Shift Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module \(PCM\) with new software. The customer may experience any of the following: 3.6L engine. MIL Illumination for P0108 \- Manifold Absolute Pressure Sensor Circuit High affects 2012 model year vehicles only. 2.4L \& 3.6L engines 2.4L \& 3.6L engines 2.4L \& 3.6L engines 3.6L engine 3.6L engine 3.6L engine 2.4L \& 3.6L engines 2.4L engine 2.4L engine 2.4L engine Improves the consistency of how shifts are controlled during upshifts ?torque management?Updating the software will correct the condition listed above.
- [08\-030\-14 REV. A](/bulletins/10139696.md), 2018-06-11, Service bulletin: PARKING BRAKE; WHEELS; STEERING; BACK OVER PREVENTION; ELECTRICAL SYSTEM. Flash: RE2 RE3 RE4 RE6 RE7 RB4 RB5 RB6 RB4 Radio Enhancements This bulletin involves updating the radio?s software and Navigation if required. A customer may experience, one or more of the following conditions: Radio display screen shows ?Test Mode?. Navigation screen locks up or display will be blank. Navigation feature lockout disable \(International Only\). Navigation system resets intermittently. Translation improvements/corrections. System consistency and operational improvements for menu selections, month/date formatting, and Garmin translation functions. Radio system improvements during remote start operation. Unable to adjust radio volume using steering wheel switch intermittently. Second screen is blank when using split screen function. Some functionality for Japanese and Korean \- keyboard, search, sort and jump. Unable to add contacts to the favorite list. Unable to dial the phone from the radio, while still able to dial from the phone. Unable to delete a cell phone number from the favorite list. More space available for phone book entries. BlackBerry support for playing songs. Reduce ticking noise during CD/USB pause and VR is silent between prompts. VR unable to transition from Non\-navigation to navigation mode. Viod screen is displayed with navigation screen. Asian language translation added. Highlighted preset continues blinking. Takes more then one button press to select preset \#10. Unable to adjust volume from steering wheel switches. Clock adjust pop up message displayed in English rather than current language. Can not connect to the phone after it has been disconnect. Teleprompter screen shows incomplete text. Some functionality for traffic \& weather jump button. After changing a language and then selecting CDDA ?of? is displayed as a tracking number. In ?Set Date Year? only 3 digits are displayed. Split map view will not cancel. Map screen turns black when driving. When in Italian, the destination arrival text will overlap onto the
- [18\-086\-16](/bulletins/10121696.md), 2017-11-03, Service bulletin: ENGINE AND ENGINE COOLING; BACK OVER PREVENTION; STRUCTURE; EXTERIOR LIGHTING; ELECTRICAL SYSTEM. Flash: Powertrain Diagnostic and System ImprovementsThis bulletin involves selectively erasing and reprogramming the Powertrain Control Module \(PCM\) with new software. A small number of customers may experience the following symptom or conditions or a Malfunction Indicator Lamp \(MIL\) illumination. Upon further investigation the technician may find the following \(DTCs\):JC Vehicles equipped with a 2.4L engine \(Sales Code ED3 or ED7\):· \*\*P0335 \- Crankshaft Position Sensor Circuit. · P050B \- Cold Start Ignition Timing Performance.· P2299 \- Brake Pedal Position / Accelerator Pedal Position Incompatible.\*\*· U0140 \- Lost Communication With Body Control Module. Attempting to clear the DTC may be unsuccessful.· P0456 \- Evap purge system small leak.· 2\-1 downshift improvement.· Charging system duty cycle enhancement to improve starting performance in low ambient temperatures.· P219A \- Bank 1 Air\-Fuel Ratio Imbalance.· Enhanced Automatic Oil Change Indicator \(EAOCI\) system enhancements that forcethe use of the severe duty cycle algorithm anytime the PCM is replaced. The vehicleduty cycle information used in the EAOCI calculation is stored in the PCM and cannot be recovered/transferred when the controller is replaced. As a result, the severe duty cycle is used in these scenarios to ensure the customer receives a timely oil change required message.· Mode 6 data accuracy enhancement for generic scan tools. JC Vehicles equipped with a 3.6L engine \(Sales Code ERB\):· \*\*P0335 \- Crankshaft Position Sensor Circuit.· P2610 \- PCM Internal Engine Off Timer Performance.\*\*· U0140 \- Lost Communication With Body Control Module. Attempting to clear theDTC may be unsuccessful.· Enhanced Automatic Oil Change Indicator \(EAOCI\) system enhancements that forcethe use of the severe duty cycle algorithm anytime the PCM is replaced. The vehicleduty cycle information used in the EAOCI calculation is stored in the PCM and cannot be recovered/transferred when the controll

JSON: [/v1/bulletins/10229873](/v1/bulletins/10229873)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%200900114&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10229873&vehicle=Service%20bulletin%200900114)