# Service bulletin 1900114

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10229840
- Published by NHTSA: 2023\-01\-17
- Manufacturer's number: 1900114
- Manufacturer's date: 2014\-05\-02
- NHTSA component: BACK OVER PREVENTION

## NHTSA's summary

Clicking/Popping Noise While Turning Wheel

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2014/MC-10229840-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2014/MC-10229840-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Driver assistance, Backup camera

## Vehicles listed

- 2012 to 2013 DODGE AVENGER

## Other bulletins for the same vehicles and component

- [9003357](/bulletins/10247905.md), 2024-01-02, Service bulletin: BACK OVER PREVENTION. ADAPTER, Engine Oil Filter \(Pentastar V6\) For all 2014MY replace the Oil Filter Adapter \(OFA\). For any other MY \(with mileage above 30,000\) review and follow instructions from STAR Online S1809000007 REV. C available on Dealer Connect. Also, consider the following: 1\) Remove OFA 2\) Replace only the oil inlet O\-ring and gaskets \(seals kit in SOL above\). 3\) Re\-install the OFA. For 2023MY and beyond use black O\-ring. For 2022MY and prior use red O\-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.

JSON: [/v1/bulletins/10229840](/v1/bulletins/10229840)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%201900114&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10229840&vehicle=Service%20bulletin%201900114)