Service bulletin 2301320
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10229333 |
| Published by NHTSA | 2023-01-09 |
| Manufacturer's number | 2301320 |
| Manufacturer's date | 2020-07-14 |
| NHTSA component | STRUCTURE; VEHICLE SPEED CONTROL; AIR BAGS |
NHTSA's summary
Hood Bezel is Warped and Hood Paint is Damaged or Chipped This bulletin involves replacing the hood bezel, inspecting the hood for paint damage and if required, refinishing the entire hood. The customer may describe the following:The hood bezel is warping and in some cases, chipping the paint on the sides and corners of the hood bezel opening. Every vehicle will get a new hood bezel even if the customer chooses to have the repairs done at a third party facility. All vehicles must be inspected and the hood bezel released through the Warranty Contact Center (888-255-2616 / Option #2) with VIN to arrange an appointment.All (U.S. Only) customers will be contacted by a Customer Care Advisor regarding this Service Bulletin. If the customer (U.S. Only) chooses to have their vehicle repaired by a third party preferred paint facility with reimbursement, an inspection with photos of the damaged paint are to be performed by the dealership. These customers must also receive a new hood bezel from the dealership for installation at a third party facility.Perform the Diagnostic Procedure. Proceed toStep 1of the Diagnostic Procedure. All (Canadian Only) customer vehicles must be inspected. Hood bezels will only be released through the Tech Hotline Center 1-800-361-2702 (English) or 1-800-361-1702 (French).
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Air bags, Body and frame, Throttle and cruise control
| DODGE CHALLENGER | 2018 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 18V332000 | 2018-05-17. ELECTRICAL SYSTEM:SOFTWARE; VEHICLE SPEED CONTROL:CRUISE CONTROL; ELECTRICAL SYSTEM:WIRING |
|---|
A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.
| S2208000045 REV.D | 2026-07-02. Service bulletin. Backup Camera Poor Image Quality Inspection |
|---|---|
| 31-001-25 REV. A | 2025-08-21. Service bulletin. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. |
| 31-001-25 REV. B | 2025-08-21. Service bulletin. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. |
| 31-001-25 | 2025-08-21. Service bulletin. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates |
| 104523 | 2025-04-25. Service bulletin. SWITCH AND BEZEL - FRONT DOOR |
| 103261 | 2025-03-04. Service bulletin. SWITCH AND BEZEL - FRONT DOOR |
| 31-001-24 | 2024-07-30. Service bulletin. "Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: Verify current warranty policy to determine if digital imaging pre-authorization is required or pre-approval is required from the Regional Office; depending on market. This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels." |
| 3100123 | 2024-01-02. Service bulletin. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: **Verify current warranty policy to determine if digital imaging pre authorization is required or Pre Approval is required from Regional Office depending on market.** This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels. |
| S1808000152 | 2023-10-02. Service bulletin. CEL (Check Engine Lamp) Illuminated, P057B Brake Pedal Position Sensor Performance |
| 3100123 | 2023-04-17. Service bulletin. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: **Verify current warranty policy to determine if digital imaging pre authorization is required or Pre Approval is required from Regional Office depending on market.** This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels. |