Service bulletin S2108000219RevA
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10227725 |
| Published by NHTSA | 2022-12-12 |
| Manufacturer's number | S2108000219RevA |
| Manufacturer's date | 2022-10-28 |
| NHTSA component | ENGINE AND ENGINE COOLING |
NHTSA's summary
Intercooler I/C Coolant Temp Missing On The Performance Page App
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Engine
| DODGE CHALLENGER | 2018 |
|---|---|
| DODGE CHARGER | 2018 |
| JEEP GRAND CHEROKEE | 2018 |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 2023338 | 2023-06-08. Engine |
|---|---|
| 23V411000 | 2023-06-08. ENGINE AND ENGINE COOLING |
| 2020544 | 2020-11-12. Engine |
| 20V699000 | 2020-11-12. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:GAS RECIRCULATION VALVE (EGR VALVE) |
| 2020371 | 2020-08-13. Engine |
| 2018269 | 2018-05-17. Engine |
A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.
| 109727 | 2026-01-28. Service bulletin. Water Pump & Chain Case Cover |
|---|---|
| 109724 | 2026-01-28. Service bulletin. Water Pump & Chain Case Cover |
| 108840 | 2025-12-11. Service bulletin. Hose- Oil Cooler Inlet, Outlet |
| 108547 | 2025-12-11. Service bulletin. ISOLATOR - ENGINE MOUNT |
| 108546 | 2025-12-11. Service bulletin. ISOLATOR - ENGINE MOUNT |
| S2509000009 | 2025-11-05. Service bulletin. Engine Oil Leak |
| 9100639 | 2025-08-13. Service bulletin. Verify Reman part number availability. Order the "R" part number for all orders: Warranty, Mopar, customer pay and service contract. Order "68" part number for New unsold units only. |
| S2509000001 REV.B | 2025-07-31. Service bulletin. Engine Rattle Noise |
| 9100622 | 2025-07-09. Service bulletin. When replacing a camshaft and parts kit (P/N 68661146xx and/or 68661147xx), it is NOT necessary to order the roller-finger followers (rocker arms) separately, as these are included in the camshaft parts kit. |
| 9100614 | 2025-06-26. Service bulletin. ADJUSTER Valve Lash Customer's complaint may include a ticking noise coming from the engine. Technician's observations can refer to spongy or stuck hydraulic lash adjusters. Exhaust lash adjusters found with a "spongy" condition (compressible plunger) leading to the assumption of being defective/malfunctioning. EXHAUST lash adjusters are designed to be COMPRESSIBLE by hand. Intake lash adjusters found with a stiff or stuck condition (non-compressible plunger) leading to the assumption of being defective/malfunctioning. INTAKE lash adjusters are designed to be NON COMPRESSIBLE by hand. Do Not Replace EXHAUST lash adjusters when the following condition is present: should be compressible, but they will exert a reactionary spring force during compression and return to full expansion without a compression force. Do Not Replace INTAKE lash adjusters when the following condition is present: should feel very firm and difficult to compress. Once the correct functioning of the intake and exhaust lash adjusters is validated with the procedure above, refer to the Service Manual "HYDRAULIC LIFTER(S) NOISE DIAGNOSIS" procedure. After the corresponding service procedures from the Service Manual involving the Lash Adjusters have been conducted, refer to the detailed instructions in the Service Manual to diagnose and/or service any other component. |