# Service bulletin M660122

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10227580
- Published by NHTSA: 2022\-12\-12
- Manufacturer's number: M660122
- Manufacturer's date: 2022\-10\-01
- NHTSA component: BACK OVER PREVENTION:SOFTWARE; BACK OVER PREVENTION; BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

## NHTSA's summary

The options in the Reversing Assist Camera menu are greyed out and cannot be adjusted.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2022/MC-10227580-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2022/MC-10227580-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Driver assistance, Backup camera

## Vehicles listed

- 2019 BMW C 400 GT
- 2018 BMW C 400 X
- 2019 BMW C 400 X
- 2017 BMW C EVOLUTION
- 2021 BMW G 310 R
- 2014 BMW R 1200 GS ADVENTURE
- 2014 to 2016 BMW R 1200 RT
- 2019 BMW R 1250 GS ADVENTURE
- 2022 BMW R 1250 GS ADVENTURE
- 2022 BMW R 18 TRANSCONTINENTA
- 2015 to 2016 BMW R NINE T
- 2018 BMW R NINE T RACER
- 2018 to 2021 BMW R NINE T SCRAMBLER
- 2015 to 2016 BMW R1200 S ADVENTURE

## Other bulletins for the same vehicles and component

- [B650414](/bulletins/10227568.md), 2022-12-12, Service bulletin: LANE DEPARTURE; UNKNOWN OR OTHER; AIR BAGS; SEATS:BARRIERS; BACK OVER PREVENTION. According to the customer, the airbag warning light was on, but it may not be illuminated when the vehicle arrives in the workshop. 1. ACSM fault code "930A60 \- Seat occupancy detection, front passenger; malfunction" is stored. The fault may or may not currently be present. Or 2. ACSM fault code "930A1C \- Front passenger seat occupancy detection transmitting fault\(moisture\)" is stored. The fault may or may not currently be present.
- [B340517](/bulletins/10174009.md), 2020-04-20, Service bulletin: BACK OVER PREVENTION; SERVICE BRAKES, HYDRAULIC; WHEELS; POWER TRAIN. TICKING NOISE WHILE CORNERING WITHOUT THE BRAKES APPLIED: This Service Information Bulletin \(Revision 3\) replaces SI B34 05 17 dated September 2017. Ticking noise coming from front wheel while cornering without brakes applied noticeable at low speeds. The vehicle must be moving. See attached video V34 01 20 Note: For a similar noise heard when parking with the brakes applied refer to SIB 31 01 12. Microscopic movement of the contact interface between the inner brake disc and the wheel bearing flange on vehicles equipped with lightweight brake discs.
- [B660115](/bulletins/10152317.md), 2018-12-17, Service bulletin: BACK OVER PREVENTION. Surround View Camera Last User Mode Operation Change. After programming with ISTA/P 2.53.5 or a more recent version, the rear camera view is displayed when the reverse gear is selected. The vehicle does not remember the last user mode \(surround/top camera view\). INFORMATION An operational concept change for the surround/top camera view was introduced with ISTA/P 2.53.5 \(I\-level Fxx\-14\-07\-505\). When the reverse gear is selected, the default view will be the rear camera. The surround/top camera view has been removed from the last user mode function. This is to meet the upcoming \(new\) federal regulations regarding rear view cameras. Note: The surround/top camera view is available, but the driver must manually switch the camera view using the iDrive controller.
- [660814](/bulletins/10149381.md), 2018-11-26, Service bulletin: BACK OVER PREVENTION. Side View Camera Does Not Display Picture. The side view camera does not display a picture: z After engaging reverse gear z Activating the side view camera via the switch on the center console near the gear shift CAUSE z Water \(moisture\) entering the cable assembly, causing corrosion on the pins in the connector\(s\) at the camera\(s\) z Poor cable connection to the camera\(s\)
- [B660814](/bulletins/10142943.md), 2018-07-16, Service bulletin: BACK OVER PREVENTION. Side View Camera Does Not Display Picture.

JSON: [/v1/bulletins/10227580](/v1/bulletins/10227580)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20M660122&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10227580&vehicle=Service%20bulletin%20M660122)