Service bulletin TSB 22-2447
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10226941 |
| Published by NHTSA | 2022-12-02 |
| Manufacturer's number | TSB 22-2447 |
| Manufacturer's date | 2022-11-23 |
| NHTSA component | POWER TRAIN:TRANSFER CASE (4-WHEEL DRIVE); UNKNOWN OR OTHER |
NHTSA's summary
Some 2021-2022 Bronco vehicles may exhibit an illuminated powertrain malfunction (wrench) indicator and diagnostic trouble codes (DTCs) C05D9:19 and/or C05D9:99 stored in the all-wheel drive (AWD) module and inoperative AWD system. These DTCs maybe setting due to a low battery state of charge. To correct the condition, follow the Service Procedure to verify the battery condition and reprogram the AWD module.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Transmission and driveline, Transfer case
Trouble codes named
C05D9
| FORD BRONCO | 2021, 2022 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| SSM 52036 | 2023-11-09. Service bulletin. Some 2021-2023 Bronco vehicles equipped with 4x4 with part time engagement may exhibit a condition of the vehicle being stuck in neutral tow mode. This may be due to a concern with the all-wheel drive (AWD) module. Make sure the proper procedure is being followed to exit neutral tow mode by referring to the Owner's Manual > Towing Your Vehicle > Recreationally Towing Your Vehicle. Make sure the vehicle's battery is fully charged and then diagnose all diagnostic trouble codes (DTCs) in the AWD module. Refer to Workshop Manual (WSM), Section 307-07A. If diagnostics do not resolve the concern or there are no DTCs present in the AWD module, replace the transfer case and the AWD module. Refer to the appropriate section of the WSM. Once repair is complete, verify the vehicle's ability to successfully enter and exit neutral tow mode by cycling the vehicle in and out of neutral tow mode a minimum of two times, allowing the vehicle to enter sleep mode (key-off for at least 5 minutes) between each cycle. Inform customers that Ford is currently working on a software update to address this condition without a need |
|---|