# Service bulletin 9100085

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10225956
- Published by NHTSA: 2022\-11\-07
- Manufacturer's number: 9100085
- Manufacturer's date: 2022\-09\-28
- NHTSA component: STRUCTURE:BODY:DOOR:HINGE AND ATTACHMENTS; ENGINE AND ENGINE COOLING; VEHICLE SPEED CONTROL

## NHTSA's summary

Front door check If a 2022 WS Jeep Grand Wagoneer comes in with a front door making a popping, creaking, or clicking noise. Please check each fastener of the door check strap with a torque wrench to verify fastener torque is to specification. If not, proceed with required repair.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2022/MC-10225956-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2022/MC-10225956-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Body and frame, Engine, Throttle and cruise control

## Vehicles listed

- 2023 JEEP GRAND CHEROKEE
- 2022 JEEP GRAND WAGONEER
- 2022 to 2023 JEEP WAGONEER

## Recalls for the same vehicles and component

- [26V584000](/recalls/nhtsa/26V584000.md), 2026-09-10: STRUCTURE:BODY:ROOF AND PILLARS
- [2025617](/recalls/tc/2025617.md), 2025-11-06: Engine
- [25V766000](/recalls/nhtsa/25V766000.md), 2025-11-06: ENGINE
- [2025506](/recalls/tc/2025506.md), 2025-09-25: Structure
- [25V642000](/recalls/nhtsa/25V642000.md), 2025-09-25: STRUCTURE:EXTERIOR TRIM
- [2025467](/recalls/tc/2025467.md), 2025-09-11: Structure
- [25V593000](/recalls/nhtsa/25V593000.md), 2025-09-11: STRUCTURE:EXTERIOR TRIM
- [23V545000](/recalls/nhtsa/23V545000.md), 2023-08-03: STRUCTURE:BODY:ROOF AND PILLARS

## Other bulletins for the same vehicles and component

- [114721](/bulletins/11037592.md), 2026-09-30, Service bulletin: STRUCTURE:BODY. APPLIQUE \- FRONT DOOR
- [114508](/bulletins/11037474.md), 2026-09-23, Service bulletin: STRUCTURE:BODY. RAIL KIT – LUGGAGE AND REMOVABLE
- [114509](/bulletins/11037473.md), 2026-09-23, Service bulletin: STRUCTURE:BODY. RAIL KIT – LUGGAGE AND REMOVABLE
- [S2609000011](/bulletins/11037354.md), 2026-09-17, Service bulletin: ENGINE. MIL\-On and/or Engine Oil Leak
- [9100905](/bulletins/11037350.md), 2026-09-17, Service bulletin: STRUCTURE:BODY; ELECTRICAL SYSTEM. Passive Entry O/S Dr Handle Prior to replacing an inoperative passive entry door handle, perform Star Online S2623000040.
- [9100902](/bulletins/11037345.md), 2026-09-17, Service bulletin: STRUCTURE:BODY; ELECTRICAL SYSTEM. Passive Entry O/S Dr Handle Prior to replacing an inoperative passive entry door handle, perform Star Online S2623000040.
- [9100363 Rev 3](/bulletins/11036762.md), 2026-09-03, Service bulletin: ENGINE. Turbocharger Kit Please note that many turbo components are serviceable separately and full turbo replacement may not be required. If the turbo is being inspected for: Noise/Rattle: Inspect heat shield fasteners for looseness and check the wastegate actuator/linkage for binding. The actuator kit is serviced separately. Oil Leak: Inspect the turbo oil feed O\-ring area for leaks. O\-ring is serviced separately.
- [9100345](/bulletins/11036761.md), 2026-09-03, Service bulletin: STRUCTURE:BODY. LATCH Front Door for Doors that Won't Open From Interior, cable dislodged or Door latch cables coming loose. Engineering is looking to collect pictures of the latches and cables as they are found by the dealers. These pictures will help us understand why they are coming lose, to develop a corrective action plan. Please submit pictures to the DID system.
- [113801](/bulletins/11036170.md), 2026-08-13, Service bulletin: STRUCTURE:BODY. SEAL \- LOWER AGS
- [9100861 Rev 3](/bulletins/11035994.md), 2026-08-06, Service bulletin: ENGINE. PUMP, Auxiliary Coolant Before replacing the Auxiliary Coolant Pump, please perform the following steps: 1\) Key ON/OFF and let the after\-run pump run for at least 20 minutes before moving on to step \#2. 2\) Inspect the pump connector area for presence of water. 3\) Inspect the pump connector for corrosion. 4\) Inspect the pump for coolant contamination as this can cause the pump to stall. 5\) Inspect battery terminals for damage to rule out a battery drainage issue. 6\) Ensure the PCM is up\-to\-date with the latest available flash. If correct repair is not performed then the claim or condition will be recovered by Warranty Operations.

JSON: [/v1/bulletins/10225956](/v1/bulletins/10225956)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%209100085&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10225956&vehicle=Service%20bulletin%209100085)