# Service bulletin 2102722

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10225270
- Published by NHTSA: 2022\-10\-31
- Manufacturer's number: 2102722
- Manufacturer's date: 2022\-08\-11
- NHTSA component: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE:SOFTWARE; EQUIPMENT; ELECTRICAL SYSTEM; POWER TRAIN

## NHTSA's summary

Flash: Transmission Control Module \(TCM\) Updates This bulletin involves reprogramming the TCM with the latest available software. The customer may notice the following condition: Poor coast down quality \(bump/clunk\) at approximately 16\-32 kph \(10\-20 mph\) range in manual mode.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2022/MC-10225270-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2022/MC-10225270-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Electrical system, Equipment and accessories, Transmission and driveline, Automatic transmission, Transmission control module

## Vehicles listed

- 2020 DODGE DURANGO

## Other bulletins for the same vehicles and component

- [S1808000152](/bulletins/10234438.md), 2023-04-17, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE \(TCM/PCM/TECM\). CEL \(Check Engine Lamp\) Illuminates, Recent PCM Replace or Flash Update Performed, Diagnostic Trouble Codes \(DTCs\) P057B Brake Pedal Position Sensor Circuit Performance, P1572 Brake Pedal Stuck, C0042\-54 Brake Pedal Missing Calibration
- [S2125000002](/bulletins/10221288.md), 2022-09-26, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE \(TCM/PCM/TECM\). Customer complaint includes a Mil\-on condition. Upon further investigation, one or more of the following fault codes may be set in the PCM:
- [S2125000002](/bulletins/10212447.md), 2022-05-31, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE \(TCM/PCM/TECM\). Customer complaint includes a Mil\-on condition. Upon further investigation, one or more of the following fault codes may be set in the PCM:
- [9004509](/bulletins/10212248.md), 2022-05-31, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION:FLUID/LUBRICANT:FILTER/SCREEN. Oil Filter If a Mopar Oil Filter is not available, use a filter that meets or exceeds USCAR36 specification and is compatible with semi and full synthetic oils. Recommended Brands: Wix, Purolator, and NapaGold
- [S2008000104](/bulletins/10178653.md), 2020-08-24, Service bulletin: ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE \(TCM/PCM/TECM\); SERVICE BRAKES. During A WiTech Session The ABS And Traction Control Lights Turn On. Multiple ABS And PCM DTC?s Set
- [21\-021\-20](/bulletins/10175156.md), 2020-05-18, Service bulletin: ELECTRICAL SYSTEM:SOFTWARE; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE \(TCM/PCM/TECM\). Flash: Transmission Control Module \(TCM\) Updates This bulletin involves reprogramming the TCM with the latest available software. The customer may notice the following condition:A loud whistle noise upon engine start up. Rough and/or erratic shifting between gears during normal drive cycles.
- [18\-075\-19](/bulletins/10168477.md), 2019-12-02, Service bulletin: ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE \(TCM/PCM/TECM\). Flash: Powertrain Control Module \(PCM\) Updates This bulletin involves reprogramming the PCM with the latest available software. The customer may comment on the following condition: Perceive rough and/or erratic transmission shifting between gears during normal drive cycles.
- [21\-037\-19](/bulletins/10168474.md), 2019-12-02, Service bulletin: ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE \(TCM/PCM/TECM\). Flash: Transmission Control Module \(TCM\) Updates This bulletin involves reprogramming the TCM with the latest available software. The customer may notice the following condition: Rough and/or erratic shifting between gears during normal drive cycles.

JSON: [/v1/bulletins/10225270](/v1/bulletins/10225270)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%202102722&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10225270&vehicle=Service%20bulletin%202102722)