# Service bulletin SIB330120

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10224199
- Published by NHTSA: 2022\-10\-17
- Manufacturer's number: SIB330120
- Manufacturer's date: 2022\-08\-01
- NHTSA component: POWER TRAIN

## NHTSA's summary

There is a shudder or jerking feeling coming from the rear of the vehicle at low speeds and low engine loads while turning.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2022/MC-10224199-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2022/MC-10224199-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Transmission and driveline

## Vehicles listed

- 2019 BMW 840I
- 2020 to 2023 BMW 840I
- 2019 BMW 850GS
- 2019 BMW 850I
- 2019 BMW M850I
- 2020 to 2023 BMW M850I

## Other bulletins for the same vehicles and component

- [B270220](/bulletins/11016472.md), 2025-04-04, Service bulletin: POWER TRAIN; WHEELS. There is a jerking or shuddering during either or both of the following: Cornering or accelerating from low speeds Driving with low to medium loads There are no warning lights or Check Control messages.
- [MCAS4023](/bulletins/10242967.md), 2023-10-01, Service bulletin: POWER TRAIN:DRIVELINE:DRIVESHAFT. BMW AG has requested the inspection of all dealer stock of the following part number\(s\) listed below to ensure the spacer is conformed to drawing.
- [B122519](/bulletins/10230722.md), 2023-01-30, Service bulletin: POWER TRAIN. After an automatic engine start \(MSA start\), the transmission intermittently goes into the Park "P" or Neutral "N" position without any customer influence.
- [B663119](/bulletins/10174318.md), 2020-04-27, Service bulletin: EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM; POWER TRAIN:MANUAL TRANSMISSION:SHIFT PATTERN INDICATOR. REARVIEW CAMERA: SPORADICALLY NO IMAGE IS DISPLAYED: This Service Information Bulletin \(Revision 2\) replaces SI B66 31 19 dated February 2020. When reverse gear is selected or the rear view camera is activated sporadically no image is displayed on the Central Information Display \(CID\). If the ignition is cycled off and back on the function is restored. Software error between the head unit and the rear\-view camera.
- [B340517](/bulletins/10174009.md), 2020-04-20, Service bulletin: BACK OVER PREVENTION; SERVICE BRAKES, HYDRAULIC; WHEELS; POWER TRAIN. TICKING NOISE WHILE CORNERING WITHOUT THE BRAKES APPLIED: This Service Information Bulletin \(Revision 3\) replaces SI B34 05 17 dated September 2017. Ticking noise coming from front wheel while cornering without brakes applied noticeable at low speeds. The vehicle must be moving. See attached video V34 01 20 Note: For a similar noise heard when parking with the brakes applied refer to SIB 31 01 12. Microscopic movement of the contact interface between the inner brake disc and the wheel bearing flange on vehicles equipped with lightweight brake discs.

JSON: [/v1/bulletins/10224199](/v1/bulletins/10224199)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20SIB330120&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10224199&vehicle=Service%20bulletin%20SIB330120)