# Service bulletin 2304516

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10223844
- Published by NHTSA: 2022\-10\-17
- Manufacturer's number: 2304516
- Manufacturer's date: 2016\-09\-27
- NHTSA component: STRUCTURE

## NHTSA's summary

Water In Either Left Or Right Front Floor Footwells This bulletin involves correcting a sealant void between the cowl plenum lower panel and dash crossmember. The customer may describe damp or wet carpet in either the left/right side or both front footwells. This condition may be due to a sealant void between the cowl plenum lower panel and dash crossmember or the seam behind the wheel well liner allowing water to enter the vehicle interior.All three areas must be checked and repaired.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2016/MC-10223844-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2016/MC-10223844-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Body and frame

## Vehicles listed

- 2015 to 2016 CHRYSLER 200

## Recalls for the same vehicles and component

- [16V589000](/recalls/nhtsa/16V589000.md), 2016-08-10: STRUCTURE; SUSPENSION; STEERING

## Other bulletins for the same vehicles and component

- [31\-001\-25 REV. A](/bulletins/11022012.md), 2025-08-21, Service bulletin: STRUCTURE:BODY. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates.
- [31\-001\-25 REV. B](/bulletins/11022011.md), 2025-08-21, Service bulletin: STRUCTURE:BODY. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates.
- [31\-001\-25](/bulletins/11022003.md), 2025-08-21, Service bulletin: STRUCTURE:BODY. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates
- [31\-001\-24](/bulletins/11005320.md), 2024-07-30, Service bulletin: STRUCTURE:BODY. "Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: Verify current warranty policy to determine if digital imaging pre\-authorization is required or pre\-approval is required from the Regional Office; depending on market. This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels."
- [3100123](/bulletins/10247995.md), 2024-01-02, Service bulletin: STRUCTURE. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: \*\*Verify current warranty policy to determine if digital imaging pre authorization is required or Pre Approval is required from Regional Office depending on market.\*\* This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
- [3100123](/bulletins/10234468.md), 2023-04-17, Service bulletin: STRUCTURE. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: \*\*Verify current warranty policy to determine if digital imaging pre authorization is required or Pre Approval is required from Regional Office depending on market.\*\* This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
- [2302814](/bulletins/10229972.md), 2023-01-17, Service bulletin: LATCHES/LOCKS/LINKAGES:HOOD:LATCH; STRUCTURE:BODY:HOOD; STRUCTURE:BODY:HOOD:HINGE AND ATTACHMENTS. Hood Latch Release Cable Hangs Down Too Low Under Instrument Panel
- [31\-002\-22](/bulletins/10229810.md), 2023-01-17, Service bulletin: STRUCTURE. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: Digital imaging pre authorization is required for Smart Warranty Base dealers or Pre Approval is required from Regional Office depending on market. This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
- [3100122](/bulletins/10229572.md), 2023-01-09, Service bulletin: STRUCTURE. Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding \(STRSW\) and Gas Metal Arc Welding \(GMAW\) processes when welding steel body panels and structural components.
- [18\-023\-16](/bulletins/10228148.md), 2022-12-19, Service bulletin: BACK OVER PREVENTION; SERVICE BRAKES, HYDRAULIC; ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM; STRUCTURE; EXTERIOR LIGHTING. Flash: 2.4L Powertrain Diagnostic and System Improvements This bulletin involves reprogramming the Powertrain Control Module \(PCM\) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp \(MIL\) illumination or one or more of the following conditions. Upon further investigation the technician may find the following Diagnostic Trouble Codes \(DTCs\) set in the PCM memory: 2015 UF Vehicles with \(Sales Codes ED6, ED8\) · P050D \- Cold Start Rough Idle. · P0335 \- Crankshaft Position Sensor Circuit. · P1607 \- PCM Internal Shutdown Timer Rationality. · P0133 \- O2 Sensor 1/1 Slow Response. · P0456 \- EVAP System Small Leak. · P0480 \- Cooling Fan 1 Control Circuit/Open. · U0402 \- Implausible Data Received From TCM. · P2172 \- High Airflow/Vacuum Leak Detected. · P1D73 \- AGS Performance. · U0140 \- Lost Communication With Body Control Module. · P0441 \- Evap Purge System Performance. · P0116 \- Engine Coolant Temperature Sensor 1 Performance. In addition to the DTCs above the following improvements have been made: · Engine Startup Flare and Idle Surge. · Improved vehicle acceleration. 2015 PF Vehicles with \(Sales Codes ED6, ED8\) · \*\*P1066 \- Cylinder 1 Oil Supply Solenoid Valve Switch Off Time Out Of Range. · P1068 \- Cylinder 2 Oil Supply Solenoid Valve Switch Off Time Out Of Range. · P106A \- Cylinder 3 Oil Supply Solenoid Valve Switch Off Time Out Of Range. · P106C \- Cylinder 4 Oil Supply Solenoid Valve Switch Off Time Out Of Range.\*\* · U0401 \- Implausible Data Received From ECM/PCM \- Signal Invalid. · P1185 \- General Pressure Sensor Correlation. · P050D \- Cold Start Rough Idle. · P0133 \- O2 Sensor 1/1 Slow Response. · P0456 \- Evap System Small Leak. · P219A \- Bank 1 Air\-Fuel Ratio Imbalance. · P2172 \- High Airflow/Vacuum Leak Detected. · P1D73 \- AGS Performance. · U0140 \- Lost Communication With Body Control Module.

JSON: [/v1/bulletins/10223844](/v1/bulletins/10223844)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%202304516&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10223844&vehicle=Service%20bulletin%202304516)