# Service bulletin 9004262

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10223504
- Published by NHTSA: 2022\-10\-17
- Manufacturer's number: 9004262
- Manufacturer's date: 2020\-06\-03
- NHTSA component: STRUCTURE:BODY:TAILGATE; VEHICLE SPEED CONTROL; STRUCTURE:BODY:BUMPERS; BACK OVER PREVENTION

## NHTSA's summary

BUMPER, Tailgate \(U\-frame\) When swing doors are opened on multi\-function tailgate the overslam bumper sticks to the door and pulls out of the U\-frame. If bumper is still stuck to the swing door remove and resecure using Mopar Bond\-All Gel PN 04467709AA. It is recommended to apply adhesive to the mounting face of all 4 bumpers and replace any missing bumpers as required. Use adhesive sparingly to avoid squeeze out and follow manufacturers recommendations for surface preparation and cure time.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2020/MC-10223504-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2020/MC-10223504-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Body and frame, Driver assistance, Throttle and cruise control, Backup camera

## Vehicles listed

- 2020 RAM 1500

## Recalls for the same vehicles and component

- [22V638000](/recalls/nhtsa/22V638000.md), 2022-08-25: BACK OVER PREVENTION:DISPLAY FUNCTION
- [20V191000](/recalls/nhtsa/20V191000.md), 2020-09-10: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

## Other bulletins for the same vehicles and component

- [96C Combo](/bulletins/11023334.md), 2025-09-24, Service campaign: ELECTRICAL SYSTEM; BACK OVER PREVENTION: WARNINGS. Customer Satisfaction Notification 96C – Park Assis Module \- Dealer Notification
- [103289](/bulletins/11014887.md), 2025-03-04, Service bulletin: BACK OVER PREVENTION: WARNINGS; LANE DEPARTURE: BLIND SPOT DETECTION. CAMERA \- REAR VIEW
- [S2208000045 REV.B](/bulletins/11011774.md), 2024-12-11, Service bulletin: BACK OVER PREVENTION: REARVIEW SYSTEM BRAKING. Backup Camera Poor Image Quality Inspection
- [0900124](/bulletins/10251862.md), 2024-03-18, Service bulletin: BACK OVER PREVENTION. Cold Engine Ticking Noise The customer may describe a ticking noise from the exhaust manifold location\(s\) when cold. This bulletin involves replacing the exhaust manifolds.
- [0804523](/bulletins/10248014.md), 2024-01-02, Service bulletin: BACK OVER PREVENTION:SOFTWARE. Radio Over The Air Updating to 34.42 Software Version ? Mobile Wi\-Fi inoperative upon start up. ? Hotspot gives 9No Internet9 connection message on phone when trying to connect to a device. This bulletin provides information regarding the latest Firmware Over The Air \(FOTA\) update and provides the service technician an overview of the steps a customer will need to take to complete the update. The radio software will be updated from 34.4 to 34.42.
- [S2025000001](/bulletins/10247967.md), 2024-01-02, Service bulletin: EXTERIOR LIGHTING; BACK OVER PREVENTION. Malfunction Indicator Lamp Illumination \(MIL\). Diagnostic Trouble Code \(DTC\) P203E ? Reductant Level Sensor 1 Circuit Intermittent\-Erratic Set.
- [9003357](/bulletins/10247905.md), 2024-01-02, Service bulletin: BACK OVER PREVENTION. ADAPTER, Engine Oil Filter \(Pentastar V6\) For all 2014MY replace the Oil Filter Adapter \(OFA\). For any other MY \(with mileage above 30,000\) review and follow instructions from STAR Online S1809000007 REV. C available on Dealer Connect. Also, consider the following: 1\) Remove OFA 2\) Replace only the oil inlet O\-ring and gaskets \(seals kit in SOL above\). 3\) Re\-install the OFA. For 2023MY and beyond use black O\-ring. For 2022MY and prior use red O\-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
- [0901923](/bulletins/10247472.md), 2023-12-18, Service bulletin: BACK OVER PREVENTION. Cold Engine Ticking Noise From Exhaust Manifold Area The customer may describe an ticking noise from the exhaust manifold location\(s\) when cold. This bulletin involves replacing the exhaust manifolds.
- [9100247](/bulletins/10247404.md), 2023-12-18, Service bulletin: BACK OVER PREVENTION; VEHICLE SPEED CONTROL. ERG Hydraulic Tensioner Before replacing any FEAD components, please check FEAD belt layout as per the engine sales code. Customer complaint may include a noise from under the hood described as a squeal, screech, squeak, chirp or belt\-related noise and/or noisy tensioner/pulley. Please refer to SOL\# S2309000007.
- [S1808000097](/bulletins/10243157.md), 2023-10-02, Service bulletin: BACK OVER PREVENTION:DISPLAY FUNCTION; BACK OVER PREVENTION. Back\-Up Camera Inoperative Complaints, Radio Display Blue or Blank When Placed in Reverse

JSON: [/v1/bulletins/10223504](/v1/bulletins/10223504)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%209004262&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10223504&vehicle=Service%20bulletin%209004262)