Service bulletin 9004535
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10221364 |
| Published by NHTSA | 2022-09-26 |
| Manufacturer's number | 9004535 |
| Manufacturer's date | 2022-06-15 |
| NHTSA component | SEAT BELTS |
NHTSA's summary
SEAT BELT, 2nd Rear Center 2nd row center seat belt is twisted and cannot be untwisted by normal seat belt manipulation. Step 1: Verify the seat belt cannot be untwisted by manipulated the seat belt webbing. Step 2: Release the seat cushion to expose the seat belt anchor. If the twist still cannot be removed by hand, continue to step 3. Step 3: Unbolt the anchor bracket and rotate the bracket until the seat belt twist is removed. Then re-torque the anchor bracket, re-install the seat cushion and verfiy the twist is removed. Please review Star Online Publication S2223000041
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Seat belts
| JEEP GRAND CHEROKEE 4XE | 2022 (the catalog's model; the bulletin names a series or trim of it) |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 2022136 | 2022-03-24. Seats And Restraints |
|---|
A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.
| 23-002-23 | 2023-02-13. Service bulletin. Steering Wheel Leather Peeling at Lower Ring This bulletin involves inspecting the leather wrap on the steering wheel and possibly replacing the steering wheel and lock nut. The customer may describe the following: Steering wheel leather wrap loose or peeling due to lack of glue around the three to five and/or the seven to nine o?clock positions. |
|---|---|
| 9004514 | 2022-12-19. Service bulletin. BUCKLE ASSY, Seat Belt, Left or Right (Front Row) Before ordering a new buckle part, ensure connector from buckle to wiring harness is fully seated. If not fully seated, this throws an intermittent airbag light on and occupant unbuckled HMI message. Airbag / seat belt light may be falsly turned on if seat buckle connector is not fully seated. Instead of replacing buckles, first check connection. Step 1: Unplug buckle from body harness. Step 2: Re-connect buckle connector to body harness. Step 3: Ensure connection is fully made and the aigbag / seat belt lights are no longer on. Step 4: If lights remain on, replace buckle. |
| S2223000041 | 2022-09-26. Service bulletin. 2nd Row Center Seat Belt Webbing Twisted |