# Service bulletin S2108000100

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10221159
- Published by NHTSA: 2022\-09\-26
- Manufacturer's number: S2108000100
- Manufacturer's date: 2021\-04\-24
- NHTSA component: ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM; FUEL SYSTEM, GASOLINE

## NHTSA's summary

CEL \(Check Engine Lamp\) Lamp On, Crank No Start, DTC U0109, U016C Lost Communications With Fuel Pump Module

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2021/MC-10221159-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2021/MC-10221159-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Electrical system, Engine, Fuel system

## Trouble codes named

U0109, U016C

## Vehicles listed

- 2021 RAM 1500

## Recalls for the same vehicles and component

- [25V298000](/recalls/nhtsa/25V298000.md), 2025-05-08: AIR BAGS; ELECTRICAL SYSTEM:WIRING
- [2023221](/recalls/tc/2023221.md), 2023-04-13: Engine
- [2022584](/recalls/tc/2022584.md), 2022-10-14: Engine
- [22V767000](/recalls/nhtsa/22V767000.md), 2022-10-13: ENGINE; FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP

## Other bulletins for the same vehicles and component

- [9100898](/bulletins/11037347.md), 2026-09-17, Service bulletin: ENGINE. Engine PNs: MY 24\-26 WD/DT \(5.7L\) Code P00B is being misdiagnosed and incorrect parts are being installed causing over repair. Refer to SOL S2609000006 The IAFM Foam Engine Valley Cover \(PN 53013735AB\) does not provide sufficient clearance for proper routing of the MDS solenoid jumper harness \(PN 05148163AE\). As a result, the harness may become compressed by the foam cover. To prevent unnecessary part replacement, the MDS solenoid jumper harness \(PN 05148163AE\) should be inspected for damage or pinch conditions prior to replacing the following part numbers: Engine PNs: 68409343AA 68409357AA 68450915AA OCV PNs: 53022338AB Phaser PNs: 53022298AA 53022298AB
- [114072](/bulletins/11036362.md), 2026-08-26, Service bulletin: ELECTRICAL SYSTEM. MOTOR \- WINDOW REGULATOR
- [114073](/bulletins/11036361.md), 2026-08-26, Service bulletin: ELECTRICAL SYSTEM. MOTOR \- WINDOW REGULATOR
- [S2608000033](/bulletins/11035198.md), 2026-07-23, Service bulletin: STRUCTURE:BODY; ELECTRICAL SYSTEM. Cluster Message “To Operate Tailgate Shift to Park” Vehicle is In Park
- [9100833 REV1](/bulletins/11035064.md), 2026-07-18, Service bulletin: FUEL/PROPULSION SYSTEM. Fuel Delivery Module Before replacing the fuel module for DTCs P0461 and P062A and other not start, long crank, fuel gauge accuracy and drivability issues, the technician should disconnect the electrical connector at the pump and perform a visual inspection of the connector for and bent, spread, or pushed out terminals. Repair any issues found. Reconnect the plug and perform a push pull push to ensure the connector is fully installed. Then perform 3 keys cycles and listen to hear if the fuel pump is operational. If the fuel pump is heard that indicates that everything is operating correctly. If the pump is heard replacement is not necessary, any replacement will function in the same way.
- [113069](/bulletins/11034910.md), 2026-07-08, Service bulletin: STRUCTURE:BODY; ELECTRICAL SYSTEM. SWITCH – HEADLAMP
- [113070](/bulletins/11034909.md), 2026-07-08, Service bulletin: ELECTRICAL SYSTEM; STRUCTURE:BODY. SWITCH – HEADLAMP
- [S2609000009](/bulletins/11034345.md), 2026-07-02, Service bulletin: ENGINE. Check Engine Light \(CEL\) Illuminated with Diagnostic Trouble Code \(DTC\) P0106 Manifold Absolute Pressure Sensor Performance Setting In The Powertrain Control Module \(PCM\)
- [9100833](/bulletins/11034342.md), 2026-07-02, Service bulletin: FUEL/PROPULSION SYSTEM. Fuel Delivery Module Before replacing the fuel module for DTCs P0461 and P062A and other not start, long crank, fuel gauge accuracy and drivability issues, the technician should disconnect the electrical connector at the pump and perform a visual inspection of the connector for and bent, spread, or pushed out terminals. Repair any issues found. Reconnect the plug and perform a push pull push to ensure the connector is fully installed. Then perform 3 keys cycles and listen to hear if the fuel pump is operational. If the fuel pump is heard that indicates that everything is operating correctly. If the pump is heard replacement is not necessary, any replacement will function in the same way.
- [S1623000028 Rev. K](/bulletins/11033975.md), 2026-06-18, Service bulletin: ELECTRICAL SYSTEM; STRUCTURE:BODY. Outside Power Fold Rearview Mirror Noise Or Loose At Pivot. Mirror Contacts Door Window Glass In The Folded Position.

JSON: [/v1/bulletins/10221159](/v1/bulletins/10221159)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20S2108000100&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10221159&vehicle=Service%20bulletin%20S2108000100)