# Service bulletin 0806115

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10220445
- Published by NHTSA: 2022\-09\-26
- Manufacturer's number: 0806115
- Manufacturer's date: 2015\-06\-10
- NHTSA component: VEHICLE SPEED CONTROL:CRUISE CONTROL

## NHTSA's summary

Incorrect cruise control set speed is diplayed.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2015/MC-10220445-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2015/MC-10220445-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Throttle and cruise control

## Vehicles listed

- 2014 JEEP CHEROKEE

## Recalls for the same vehicles and component

- [18V332000](/recalls/nhtsa/18V332000.md), 2018-05-17: ELECTRICAL SYSTEM:SOFTWARE; VEHICLE SPEED CONTROL:CRUISE CONTROL; ELECTRICAL SYSTEM:WIRING
- [14V293000](/recalls/nhtsa/14V293000.md), 2014-06-04: FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL; VEHICLE SPEED CONTROL:ACCELERATOR PEDAL

## Other bulletins for the same vehicles and component

- [0801315](/bulletins/10229193.md), 2023-01-09, Service bulletin: SEAT BELTS; VEHICLE SPEED CONTROL; ELECTRICAL SYSTEM; POWER TRAIN; STRUCTURE; STEERING; AIR BAGS. Flash: BCM Diagnostic And System Improvements This bulletin involves updating the Body Control Module \(BCM\) software. Customer and or Technician may notice one of more of the following: ? A message may be displayed in the cluster ?Start/Stop Not Available?, this may have started after the battery was disconnected. On Further inspection the Technician may find DTC U0216 Lost Communication With Driver Door Switch. ? Intermittent No Start condition Without any DTCs \(Vehicles with steering column lock, only\). ? U1220\-87 \- Lost Steering Lock Request Message \- Missing Message. ? U1517\-87 \- Body Controller Secret Code \- Missing Message. ? B2199\-17 \- Battery Voltage \- Circuit Voltage Above Threshold, set in the BCM. ? Day Time Running Lamps \(DRL\) will not turn on until the vehicle speed is 2 MPH \(3 KPH\), \(Manual Transmission only\). ? Puddle Lamps will not turn off when the engine is started, \(Manual Transmission only\). NOTE: If battery system DTC P0562 Battery/System Voltage Low or P0563 Battery/System Voltage High are set, normal charging system diagnostics needs to be performed.
- [08\-013\-15](/bulletins/10221527.md), 2022-09-26, Service bulletin: VEHICLE SPEED CONTROL; STEERING; AIR BAGS; SEAT BELTS; STRUCTURE; POWER TRAIN; ELECTRICAL SYSTEM. Flash: BCM Diagnostic And System Improvements This bulletin involves updating the Body Control Module \(BCM\) software. Customer and or Technician may notice one of more of the following: ? A message may be displayed in the cluster ?Start/Stop Not Available?, this may have started after the battery was disconnected. On Further inspection the Technician may find DTC U0216 Lost Communication With Driver Door Switch. ? Intermittent No Start condition Without any DTCs \(Vehicles with steering column lock, only\). ? U1220\-87 \- Lost Steering Lock Request Message \- Missing Message. ? U1517\-87 \- Body Controller Secret Code \- Missing Message. ? B2199\-17 \- Battery Voltage \- Circuit Voltage Above Threshold, set in the BCM. ? Day Time Running Lamps \(DRL\) will not turn on until the vehicle speed is 2 MPH \(3 KPH\), \(Manual Transmission only\). ? Puddle Lamps will not turn off when the engine is started, \(Manual Transmission only\). NOTE: If battery system DTC P0562 Battery/System Voltage Low or P0563 Battery/System Voltage High are set, normal charging system diagnostics needs to be performed.
- [0811114](/bulletins/10221086.md), 2022-09-26, Service bulletin: POWER TRAIN; ELECTRICAL SYSTEM; VEHICLE SPEED CONTROL; SEAT BELTS; AIR BAGS; STRUCTURE; STEERING. Flash: BCM Diagnostic And System Improvements This bulletin involves updating the Body Control Module \(BCM\) software. Customer and or Technician may notice one of more of the following: A message may be displayed in the cluster ?Start/Stop Not Available?, this may have started after the battery was disconnected. On Further inspection the Technician may find DTC U0216 Lost Communication With Driver Door Switch. Without any DTCs \(Vehicles with steering column lock, only\). U1220\-87 \- Lost Steering Lock Request Message \- Missing Message. U1517\-87 \- Body Controller Secret Code \- Missing Message. B2199\-17 \- Battery Voltage \- Circuit Voltage Above Threshold, set in the BCM. Day Time Running Lamps \(DRL\) will not turn on until the vehicle speed is 2 MPH \(3 KPH\), \(Manual Transmission only\). Puddle Lamps will not turn off when the engine is started, \(Manual Transmission only\).If battery system DTC P0562 Battery/System Voltage Low or P0563 Battery/System Voltage High are set, normal charging system diagnostics needs to be performed.
- [08\-061\-15](/bulletins/10191416.md), 2021-05-03, Service bulletin: VEHICLE SPEED CONTROL:CRUISE CONTROL. Incorrect cruise control set speed is diplayed.
- [68277402A](/bulletins/10139956.md), 2018-06-11, Service bulletin: VEHICLE SPEED CONTROL:CRUISE CONTROL. Adaptive Cruise Control Sensor 1\) If you are replacing this part due to the cluster displaying Clean Radar Sensor in Front of Vehicle or DTC C1266 ACC Sensor Blinded, please verify that there is no blockage in front of the sensor. Blockage can occur from mud, ice, snow, front end damage, bracket damage, the sensor not attached to the bracket properly or an aftermarket fascia installed. This fault can occur intermittently in muddy or icy/snowy conditions and is considered normal operation. Under some circumstances, a misaligned sensor can also cause the C1266 DTC, please complete an alignment procedure. No replacement is required.\~ 2\) If you are replacing this part due to the cluster displaying ?ACC/FCW Unavailable Service Required?, please check the DTC fault codes. This will indicate which module needs to be serviced \(TCM, PCM, ESP/ABS, etc\). This fault is not due to the ACC Sensor. No sensor replacement is required.\~ 3\) If you have fault code DTC C125E ACC Sensor Adjustment Required, please verify that the radar sensor is fully seated in the clips and there is no damage \(if clips are damaged on a 2013 or earlier vehicle, order P/N 68085813A$, otherwise please replace the module\), please verify there is no blockage to the sensor due to mud, ice, snow, front end damage, bracket damage or the sensor not attached to the bracket properly. Perform the Vertical Alignment and the Electronic Horizontal Alignments procedure as stated in the service manual. Please note, if the horizontal alignment procedure will not complete, check the vertical alignment and confirm that the sensor is seated properly. Rerun the horizontal alignment procedure. No sensor replacement is required. \*\*Hints for running Horizontal Alignment procedure: A\) Verify speed is between 45 and 75 mph, B\) verify the road is relatively straight with signs, poles, guard rails, etc C\) Do not tail a vehicle too closely this inhibits the learning procedure

JSON: [/v1/bulletins/10220445](/v1/bulletins/10220445)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%200806115&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10220445&vehicle=Service%20bulletin%200806115)