# Service bulletin 08\-038\-14

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10218797
- Published by NHTSA: 2022\-08\-29
- Manufacturer's number: 08\-038\-14
- Manufacturer's date: 2014\-04\-09
- NHTSA component: STRUCTURE:BODY:TAILGATE

## NHTSA's summary

Missing: Tailgate Keyless Entry With Back\-Up Camera Wiring Kit And Vehicle System Interface Module Jumper This bulletin involves placing the missing wire harnesses in the glove box for later installation. Vehicle System Interface Module \(VSIM\) jumper and tailgate keyless entry with back\-up camera wiring kit missing from glove box.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2014/MC-10218797-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2014/MC-10218797-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Body and frame

## Vehicles listed

- 2014 RAM 2500
- 2014 RAM 3500
- 2014 RAM 4500
- 2014 RAM 5500

## Recalls for the same vehicles and component

- [2019441](/recalls/tc/2019441.md), 2019-08-30: Structure

## Other bulletins for the same vehicles and component

- [S1623000028 Rev. K](/bulletins/11033975.md), 2026-06-18, Service bulletin: ELECTRICAL SYSTEM; STRUCTURE:BODY. Outside Power Fold Rearview Mirror Noise Or Loose At Pivot. Mirror Contacts Door Window Glass In The Folded Position.
- [S1623000028 REV.J](/bulletins/11033897.md), 2026-06-16, Service bulletin: STRUCTURE:BODY. Outside Power Fold Rearview Mirror Noise Or Loose At Pivot. Mirror Contacts Door Window Glass In The Folded Position.
- [S1623000028 REV.I](/bulletins/11033308.md), 2026-06-03, Service bulletin: ELECTRICAL SYSTEM; STRUCTURE:BODY. Outside Power Fold Rearview Mirror Noise Or Loose At Pivot. Mirror Contacts Door Window Glass In The Folded Position.
- [S2623000032](/bulletins/11032344.md), 2026-05-06, Service bulletin: STRUCTURE:BODY. Squeak Or Squawk Noise Coming From Either Side Door Of The Vehicle, It Could Be Just One Door Or More. The Noise Can Be Present In Either The Upper Or The Lower Hinge.
- [S1623000028 REV.H](/bulletins/11031241.md), 2026-04-10, Service bulletin: STRUCTURE:BODY. Outside Power Fold Rearview Mirror Noise Or Loose At Pivot. Mirror Contacts Door Window Glass In The Folded Position.
- [3100122](/bulletins/10229572.md), 2023-01-09, Service bulletin: STRUCTURE. Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding \(STRSW\) and Gas Metal Arc Welding \(GMAW\) processes when welding steel body panels and structural components.
- [Parts](/bulletins/10226283.md), 2022-11-21, Service bulletin: STRUCTURE; EQUIPMENT. Center Console.
- [9004470](/bulletins/10225951.md), 2022-11-07, Service bulletin: STRUCTURE:BODY:BUMPERS; ELECTRICAL SYSTEM:WIRING:CONNECTORS/PLUGS/RECEPTACLES; TRAILER HITCHES. CONNECTOR Trailer Tow,WIRING Trailer Tow,CONNECTOR 7 Way,WIRING Rear Bumper If the connector or wiring is physically damaged, burned, melted or corroded, prior to replacing the part, please contact FCA Redacted Content If no response in 15 minutes, proceed with repair. Please send pictures of the failed part to FCA Redacted Content
- [3100122](/bulletins/10225424.md), 2022-10-31, Service bulletin: STRUCTURE. Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding \(STRSW\) and Gas Metal Arc Welding \(GMAW\) processes when welding steel body panels and structural components.
- [3100122](/bulletins/10225287.md), 2022-10-31, Service bulletin: STRUCTURE:INTERIOR PANELS:DOOR; STRUCTURE; UNKNOWN OR OTHER. Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding \(STRSW\) and Gas Metal Arc Welding \(GMAW\) processes when welding steel body panels and structural components.

JSON: [/v1/bulletins/10218797](/v1/bulletins/10218797)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%2008-038-14&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10218797&vehicle=Service%20bulletin%2008-038-14)